Technical data
Technical data - electrical ratings
Shaft insulation
  • Suitable up to 2.8 kV
Interference immunity
  • EN 61000-6-2
Emitted interference
  • EN 61000-6-3
Technical data - electrical ratings (encoder)
Voltage supply
  • 9...30 VDC; 5 VDC ±5 %
Consumption w/o load
  • ≤100 mA
Pulses per revolution
  • 300 … 5000
Phase shift
  • 90 ° ±20°
Duty cycle
  • 40…60 %
Reference signal
  • Zero pulse, width 90°
Output frequency
  • ≤120 kHz
  • ≤300 kHz (on request)
Output signals
  • K1, K2, K0 + inverted
  • Error output (option EMS)
Output stages
  • HTL, TTL/RS422
Technical data - electrical ratings (speed switch)
Switching accuracy
  • ± 4 % (≤1500 rpm)
  • ± 2 % (>1500 rpm)
Switching hysteresis
  • = 30 % of switching speed
Switching outputs
  • 1 output, speed control
Output switching capacity
  • ≤6 A / 250 VAC; ≤1 A / 48 VDC
  • (EAC: <50 VAC / 75 VDC)
Minimum switching current
  • 100 mA
Switching delay time
  • ≤40 ms
Technical data - mechanical design
Size (flange)
  • ø105 mm
Shaft type
  • ø16...20 mm (blind hollow shaft)
  • ø17 mm (cone shaft 1:10)
Admitted shaft load
  • ≤450 N axial, ≤600 N radial
Protection EN 60529
  • IP 67
Operating speed
  • ≤6000 rpm
Range of switching speed (ns)
  • 650...6000 rpm
Operating torque typ.
  • 6 Ncm
Rotor moment of inertia
  • 680 gcm²
Material
  • Housing: aluminium die-cast
  • Shaft: stainless steel
Operating temperature
  • -20...+85 °C
Resistance
  • IEC 60068-2-6
  • Vibration 5 g, 10-2000 Hz
  • IEC 60068-2-27
  • Shock 50 g, 6 ms
Corrosion protection
  • IEC 60068-2-52 Salt mist
  • for ambient conditions CX (C5-M) according to ISO 12944-2
Shaft insulation
  • 2.8 kV
Transmission length
  • ≤350 m at 100 kHz (HTL-P)
  • ≤550 m at 100 kHz (TTL)
Connection
  • 2x terminal box
  • 3x terminal box (with option M)
Weight approx.
  • 2.3 kg
  • 2.5 kg (with option M)
Approval
  • CE

Downloads
Data sheet
Declaration of conformity

Accessories
Accessoires de montage
Kit de montage dispositif anti-rotation (M6) et ruban de mise à la terre

Article no.: 11077197

Kit de pièces pour le montage d'un butoir anti-rotation grandeur M6 et pour la fixation d'une bande de mise à la terre.

Kit de montage et de démontage

Article no.: 11077087

Kit de montage et de démontage pour la fixation d'un codeur à axe sortant avec l'arbre d'entraînement et pour le démontage du codeur de l'arbre d'entraînement.

Butoir anti-rotation M6, longueur 67...70 mm

Article no.: 11043628

  • Butoir anti-rotation pour codeur axe traversant
  • Têtes d’articulation dimensions M6 selon DIN ISO 12240-4, série dimensionnelle K
  • Compensation des tolérances de montage sur l’axe d’entraînement en direction axiale
  • Version standard
  • Longueur 67...70 mm
Butoir anti-rotation M6, longueur 120...130 mm (≥71 mm)

Article no.: 11004078

  • Butoir anti-rotation pour codeur axe traversant
  • Têtes d’articulation dimensions M6 selon DIN ISO 12240-4, série dimensionnelle K
  • Compensation des tolérances de montage sur l’axe d’entraînement en direction axiale
  • Version standard
  • Longueur 120...130 mm
  • Raccourcissable à ≥71 mm
Butoir anti-rotation M6, longueur 425...460 mm (≥131 mm)

Article no.: 11002915

  • Butoir anti-rotation pour codeur axe traversant
  • Têtes d’articulation dimensions M6 selon DIN ISO 12240-4, série dimensionnelle K
  • Compensation des tolérances de montage sur l’axe d’entraînement en direction axiale
  • Version standard
  • Longueur 425...460 mm
  • Raccourcissable à ≥131 mm
Butoir anti-rotation M6 isolée, longueur 67...70 mm

Article no.: 11054917

  • Butoir anti-rotation pour codeur axe traversant
  • Têtes d’articulation dimensions M6 selon DIN ISO 12240-4, série dimensionnelle K
  • Compensation des tolérances de montage sur l’axe d’entraînement en direction axiale
  • Version isolée
  • Longueur 67...70 mm
Butoir anti-rotation M6 isolée, longueur 120...130 mm (≥71 mm)

Article no.: 11072795

  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
Torque arm M6 insulated, length 425...460 mm (≥131 mm)

Article no.: 11082677

  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
Connectors and cables
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.

Diagnostic accessories
Analyzer for encoders HENQ 1100

Article no.: 11075858

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Article no.: 11075880

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages

To the top