2. Apercu des produits
  3. Codeurs / Capteurs angulaires
  4. Codeurs incrémentaux HeavyDuty
  5. SinCos
  6. Dimension 168 mm – Axe creux jusqu’à 70 mm
  7. HOGS 151
Technical data
Caractéristiques électriques
Alimentation
  • 5 VDC ±10 %
  • 9...26 VDC
Courant de service à vide
  • ≤90 mA
Périodes par tour
  • 1024 … 5000
Mode de déphasage
  • 90 °
Signal de référence
  • Top zéro, largeur 90°
Principe de détection
  • Optique
Signaux de sortie
  • A+, B+, R+, A-, B-, R-
Etage de sortie
  • SinCos 1 Vcc
Différence d'amplitude SinCos
  • ≤20 mV
Onde harmonique typ.
  • -50 dB
Tension d'offset
  • ≤20 mV
Bande passante
  • 200 kHz (-3 dB)
Immunité
  • EN 61000-6-2
Emission
  • EN 61000-6-3
Certificat
  • CE
  • Certification UL/E217823
Technical data - mechanical design
Size (flange)
  • ø168 mm
Shaft type
  • ø60...70 mm (through hollow shaft)
Admitted shaft load
  • ≤350 N axial
  • ≤500 N radial
Protection EN 60529
  • IP 54
Operating speed
  • ≤6300 rpm (mechanical)
Operating torque typ.
  • 20 Ncm
Rotor moment of inertia
  • 14.9 kgcm² (ø70)
Material
  • Housing: aluminium
  • Shaft: stainless steel
Operating temperature
  • -20...+85 °C
Resistance
  • IEC 60068-2-6
  • Vibration 10 g, 10-2000 Hz
  • IEC 60068-2-27
  • Shock 200 g, 6 ms
Explosion protection
  • II 3 G Ex ec IIC T4 Gc (gas)
  • II 3 D Ex tc IIIB T135°C Dc (dust)
  • (only with option ATEX)
Connection
  • Cable 1 m
  • Mating connector
Weight approx.
  • 3.2 kg
Downloads
Data sheet
Operating Manual
Certificates / approvals
Declaration of conformity
3D CAD / CAE

Accessories
Diagnostic accessories
Analyzer for encoders HENQ 1100

Article no.: 11075858
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Article no.: 11075880
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
To the top