Caractéristiques techniques
Caractéristiques électriques
Alimentation
  • 4,75...30 VDC
Protection contre l'inversion de polarité
  • Oui
Courant de service à vide
  • ≤40 mA (24 VDC)
  • ≤130 mA (4,75 VDC) + Charge à sortie, max. 250 mA
Impulsions par tour
  • 1024 … 80000
Précision
  • ≤60 s d'angle
Principe de détection
  • Optique
Fréquence de sortie
  • ≤300 kHz (TTL)
  • ≤160 kHz (HTL)
Signaux de sortie
  • A, B, Z
  • A, B, 0 + compléments, avec voie négative B
Etage de sortie
  • Emetteur de ligne (TTL, 7272) Vout = 5 V, Transistors de puissance
  • Push-pull (HTL, 7272) Vout = Vin, transistors de puissance
Immunité
  • EN 61000-6-2
Emission
  • EN 61000-6-3
Certificat
  • Certification UL / fiche no. E240061
  • Conforme RoHS directive européenne 2011/65/CE
  • CE
Caractéristiques mécaniques
Taille (bride)
  • ø3,15" (ø80 mm)
Type d’axe
  • ø0,375...1" (ø9,525...25,4 mm) (axe creux traversant isolée)
Concentricité de l'alésage
  • 0,0016" (0.04 mm) TIR max.
Erreur d'alignement admissible
  • 0,004" (0,1016 mm) radial TIR (fin d'axe)
  • 0,01" (0,254 mm) axial
Protection EN 60529
  • IP 54
  • IP 65
  • IP 67
Vitesse de rotation
  • ≤5000 t/min (voir tableau des températures)
Stockage
  • 52100 SAE acier de haut carbon (ABEC 5)
Couple de démarrage 
  • ≤3 in-oz (77 °F, IP 65)
  • ≤0,02 Nm (+25 °C, IP 65)
Moment d'inertie rotor
  • 2,3 oz-in² (420 gcm²)
Durée de vie
  • Stockage: 13 milliards de tours (89000 h / 2500 tr/min)
Matière
  • Boîtier: aluminium, peint
  • Axe: acier inoxydable
Température d'utilisation
  • -40...+212 °F (-40...+100 °C), (câble immobile): voir tableau des températures
Humidité relative
  • 98 % sans condensation
Résistance
  • EN 60068-2-6 Vibrations 20 g, 60-2000 Hz
  • EN 60068-2-27 Choc 200 g, 6 ms
Raccordement
  • MIL-connecteur, 7 points
  • MIL-connecteur, 10 points
  • Câble (sortie AWG26)
Poids
  • 23 oz.
  • 660 g

Téléchargements
Fiche technique
Guide rapide
Certifications / Approbations
3D CAD / CAE

Accessories
Mounting accessories
Torque arm T1, fixed length, for bolt 3/8" with plastic clip and screws

Article no.: 11076339

  • Fast and easy mounting on encoder. Prevents against bearing force overlaod.
Torque arm T3, adjustable length, for bolt 1/4" with plastic clip and screws

Article no.: 11075692

  • Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point.
Torque arm T4, adjustable length, for bolt 5/16" with plastic clip and screws

Article no.: 11075690

  • Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point.
Torque arm T5, adjustable length, for bolt 3/8" with plastic clip and screws

Article no.: 11071506

  • Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point.
Torque arm T6, adjustable length, kit for bolts 1/4", 5/16" and 3/8" with plastic clip and screws

Article no.: 11167978

  • Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point.
Reducer insert HS35 ø0.375" (ø9.525 mm)

Article no.: 11084462

Reducer insert HS35 ø0.50" (ø12.7 mm)

Article no.: 11078636

Reducer insert HS35 ø0.625" (ø15.875 mm)

Article no.: 11080114

Reducer insert HS35 ø0.75" (ø19.05 mm)

Article no.: 11078639

Reducer insert HS35 ø0.87" (ø22.225 mm)

Article no.: 11078654

Reducer insert HS35 ø10 mm

Article no.: 11087744

Reducer insert HS35 ø12 mm

Article no.: 11087745

Reducer insert HS35 ø14 mm

Article no.: 11087746

Reducer insert HS35 ø15 mm

Article no.: 11148651

Reducer insert HS35 ø16 mm

Article no.: 11087747

Reducer insert HS35 ø18 mm

Article no.: 11087748

Reducer insert HS35 ø20 mm

Article no.: 11087750

Dust cap HS35

Article no.: 11075459

  • Fast and easy mounting on encoder backside. Prevents encoder bearing against dust, dirt and fluids. Sealing up to IP 67.
Protective cage HS35

Article no.: 11080884

  • Protective cover; for NEMA 56C-face (4.5") and fan-cover. For attachment to a fan cover hammer head bolts are recommended (not included).
Connectors and cables
NAC 25E 7-pin Mil Spec Mating Connector

Article no.: 11128642

  • NAC 25E 7-pin Mil Spec Mating Connector (female)
CNAC 25E 7-pin Mil Spec Mating Connector + cable L=10 ft (3.05 m)

Article no.: 11078440

  • Shielded connection cable with mating connector NAC 25E 7-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 10 ft (3.05 m)
CNAC 25E 7-pin Mil Spec Mating Connector + cable L=20 ft (6.10 m)

Article no.: 11078442

  • Shielded connection cable with mating connector NAC 25E 7-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 20 ft (6.10 m)
CNAC 25E 7-pin Mil Spec Mating Connector + cable L=30 ft (9.15 m)

Article no.: 11078446

  • Shielded connection cable with mating connector NAC 25E 7-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 30 ft (9.15 m)
NAC 29H 10-pin Mil Spec Mating Connector

Article no.: 11126235

  • NAC 29H 10-pin Mil Spec Mating Connector (female)
CNAC 29H 10-pin Mil Spec Mating Connector + cable L=10 ft (3.05 m)

Article no.: 11078307

  • Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 10 ft (3.05 m)
CNAC 29H 10-pin Mil Spec Mating Connector + cable L=20 ft (6.10 m)

Article no.: 11078427

  • Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 20 ft (6.10 m)
CNAC 29H 10-pin Mil Spec Mating Connector + cable L=30 ft (9.15 m)

Article no.: 11078428

  • Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 30 ft (9.15 m)

To the top