HOG 11 + FSL

Caractéristiques techniques

montrer tous

Shaft insulation

Suitable up to 2.8 kV

Transmission length

≤350 m at 100 kHz (HTL-P)
≤550 m at 100 kHz (TTL)

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-3

Approval

Voltage supply

9...30 VDC; 5 VDC ±5 %

Consumption w/o load

≤100 mA

Pulses per revolution

300 … 5000

Phase shift

90 ° ±20°

Duty cycle

40…60 %

Reference signal

Zero pulse, width 90°

Output frequency

≤120 kHz
≤300 kHz (on request)

Output signals

K1, K2, K0 + canali invertiti
Error output (option EMS)

Output stages

HTL-P (power linedriver)
TTL/RS422

Sensing method

Optical

Switching accuracy

± 4 % (Δn = 2 rpm/s);
20 % (Δn = 1500 rpm/s)

Switching deviation

≤3 % (cw-ccw rotation)

Switching hysteresis

40 % of switching speed

Switching outputs

1 output, speed control

Output switching capacity

≤6 A / 230 VAC
≤1 A / 125 VDC
(EAC: <50 VAC / 75 VDC)

Minimum switching current

50 mA

Caractéristiques mécaniques

Taille (bride)

ø105 mm

Type d’axe

ø16...20 mm (non traversant)
ø17 mm (axe conique 1:10)

Charge

≤450 N axiale
≤600 N radiale

Protection EN 60529

IP 67

Vitesse (n)

≤1,25 · ns

Plage de vitesses de commutation (ns)

850...4500 t/min (Δn = 2 [t/min]/s)

Couple en fonctionn. typ.

6 Ncm

Moment d'inertie rotor

680 gcm²

Matière

Boîtier: fonte d'aluminium
Axe: inox

Température d'utilisation

-40...+100 °C
-25...+100 °C (>3072 impulsions)
-50...+100 °C (Option)

Résistance

IEC 60068-2-6
Vibrations 5 g, 10-2000 Hz
IEC 60068-2-27
Choc 50 g, 11 ms

Protection contre la corrosion

IEC 60068-2-52 brouilla. salins
pour les conditions ambiantes CX (C5-M) selon ISO 12944-2

Raccordement

2x boîte à bornes
3x boîte à bornes (avec option M)

Poids

2,2 kg
2,4 kg (avec option M)

Téléchargements

montrer tous

Fiche technique

Fiche technique – HOG 11 + FSL
- FR (pdf | 1 MB)
Fiche technique – HOG 11 + FSL
- DE (pdf | 1 MB)
Fiche technique – HOG 11 + FSL
- EN (pdf | 1 MB)

Instructions d'utilisation

HOG 11 + FSL
- DE/EN (pdf | 4 MB)

Declaration of conformity

DoC / CoC - Codeurs avec FSL
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 291 KB)

Accessories

show all

Accessoires de montage

	Kit de montage dispositif anti-rotation (M6) et ruban de mise à la terre Article no.: 11077197	Kit de pièces pour le montage d'un butoir anti-rotation grandeur M6 et pour la fixation d'une bande de mise à la terre.
	Kit de montage et de démontage Article no.: 11077087	Kit de montage et de démontage pour la fixation d'un codeur à axe sortant avec l'arbre d'entraînement et pour le démontage du codeur de l'arbre d'entraînement.
	Torque arm M6, length 67...70 mm Article no.: 11043628	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 67...70 mm
	Torque arm M6, length 120...130 mm (≥71 mm) Article no.: 11004078	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 120...130 mm Can be shortened to ≥71 mm
	Torque arm M6, length 425...460 mm (≥131 mm) Article no.: 11002915	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 425...460 mm Can be shortened to ≥131 mm
	Torque arm M6 insulated, length 67...70 mm Article no.: 11054917	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 67...70 mm
	Torque arm M6 insulated, length 120...130 mm (≥71 mm) Article no.: 11072795	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 120...130 mm Can be shortened to ≥71 mm
	Torque arm M6 insulated, length 425...460 mm (≥131 mm) Article no.: 11082677	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 425...460 mm Can be shortened to ≥131 mm

Connectors and cables

Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.

Diagnostic accessories

	Analyzer for encoders HENQ 1100 Article no.: 11075858	Analyzer for encoders Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.) Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding) Individual error messages Windows applications software for the PC, for graphical display and statistical evaluation of the measurements Recording of measurements and error messages
	Analyzer for encoders HENQ 1100 B with integrated battery Article no.: 11075880	Analyzer for encoders Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.) Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding) Individual error messages Windows applications software for the PC, for graphical display and statistical evaluation of the measurements Recording of measurements and error messages

To the top

Incremental encoders - combination