2. Apercu des produits
  3. Codeurs / Capteurs angulaires
  4. Codeurs incrémentaux HeavyDuty
  5. Gamme complète à axe creux
  6. EExHOG 161 - incrémental
Dati tecnici
Caractéristiques électriques
Alimentation
  • 9...30 VDC
  • 5 VDC ±5 %
  • 9...26 VDC
Courant de service à vide
  • ≤100 mA
Impulsions par tour
  • 250 … 2500
Mode de déphasage
  • 90 ° ±20°
Période
  • 40…60 %
Signal de référence
  • Top zéro, largeur 90°
Principe de détection
  • Optique
Fréquence de sortie
  • ≤120 kHz
Signaux de sortie
  • K1, K2, K0 + compléments
Etage de sortie
  • HTL
  • TTL/RS422
Immunité
  • EN 61000-6-2
Emission
  • EN 61000-6-3
Certificat
  • CE
  • ATEX/IECEx
  • IECEx
Dati tecnici - progettazione meccanica
Taille (bride)
  • ø160 mm
Type d’axe
  • ø30...70 mm (traversant)
Charge
  • ≤450 N axiale
  • ≤650 N radiale
Protection EN 60529
  • IP 54
  • IP 56
Velocità operativa
  • ≤5600 giri/min (meccanico)
Tip. coppia operativa
  • 60 Ncm
Rotore momento d‘inerzia
  • 31,9 kgcm² (ø40)
  • 11,3 kgcm² (ø70)
Materiale
  • Housing: aluminium alloy
  • Albero: acciaio inox
Ambient temperature
  • -20...+58 °C (IP 56)
  • -20...+66 °C (IP 54)
Resistenza
  • IEC 60068-2-6
  • Vibrazione 10 g, 50-2000 Hz
  • IEC 60068-2-27
  • Urti 100 g, 6 ms
Corrosion protection
  • IEC 60068-2-52 Salt mist
  • for ambient conditions C4 according to ISO 12944-2
Protezione da esplosione
  • II 2 G Ex db eb IIC T6 Gb
  • Ex db eb IIC T6 Gb
Allacciamento
  • Terminal box
Peso ca.
  • 8,8 kg (ø40)
  • 6,2 kg (ø70)
Scaricare
Data sheet
Operating Manual
Certificates / approvals
Declaration of conformity

Accessori
Accessori di montaggio
Torque arm M6, length 67...70 mm

Articolo n..: 11043628
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 67...70 mm
Torque arm M6, length 120...130 mm (≥71 mm)

Articolo n..: 11004078
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
Torque arm M6, length 425...460 mm (≥131 mm)

Articolo n..: 11002915
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
Torque arm M6 insulated, length 67...70 mm

Articolo n..: 11054917
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 67...70 mm
Torque arm M6 insulated, length 120...130 mm (≥71 mm)

Articolo n..: 11072795
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
Torque arm M6 insulated, length 425...460 mm (≥131 mm)

Articolo n..: 11082677
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
Connettori e cavi
Extension cable gland M16 to M20

Articolo n..: 11106863

Extension for the M16x1.5 cable gland to a M20x1.5 cable gland, extension part and cable gland M20x1,5 included. Permissible cable diameter 9-14 mm.
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
Diagnostic accessories
Analyzer for encoders HENQ 1100

Articolo n..: 11075858
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Articolo n..: 11075880
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
In alto