2. Resumo dos produtos
  3. Detecção de objeto
  4. Sensores de proximidade indutivos
  5. Robusto
  6. veículos fora-de-estrada
  7. IR12V.P04S-F55.PO1Z.9BCU/E011
Dados técnicos
dados gerais
Mounting type
  • Flush
Special type
  • Vehicle
Nominal sensing distance Sn
  • 4 mm
Hysteresis
  • 3 … 10 % of Sr
Output indicator
  • LED red
Approvals/certificates
  • EN 60947-5-2:2007, Sec 8.6
  • EN 13309:2010 1) 3)
  • EN ISO 14982:2009 1) 2)
  • ISO 13766:2006 1)
Dados Elétricos
Switching frequency
  • 2 kHz
Voltage supply range +Vs
  • 7 … 48 VDC
Current consumption max. (no load)
  • 10 mA
Output circuit
  • PNP make function (NO)
Voltage drop Vd
  • <2 VDC
Output current
  • 200 mA
Short circuit protection
  • Yes
Reverse polarity protection
  • Yes
Off-Highway Electromagnetic immunity
  • ISO 11452-4: 200mA
  • ISO 11452-2: 100V/m
  • Based on UN / ECE R10 Rev 5 ch. 6.8 (no ECE type approval available)
Off-Highway Emission
  • EN 55011
  • Based on UN / ECE R10 Rev 5 ch. 6.5, 6.6 (no ECE type approval available)
Conducted inteference
  • ISO 7637-2, ISO 16750-2, details see section "Test pulses"
Dados mecânicos
Design
  • Cylindrical threaded
Material (sensing face)
  • PBT
Housing material
  • Brass nickel plated
Dimension
  • 12 mm
Housing length
  • 55 mm
Connection types
  • Cable, L=2 m
Tightening torque max.
  • 15 Nm (A: 10,5 Nm, B: 10,5 Nm)
Condições ambientais
Operating temperature
  • -40 … +85 °C
Protection class
  • IP 68 (sensing face/sensor)
  • IP 68 (1,5 m, 24 h)
  • IP 69K (sensing face)
Modelo 3D
Modelo 3D

A criação de modelos CAD requer um registro externo no CADENAS.

Transferências
Data sheet
Quickstart
Certificates / approvals
EPLAN

Diagramas
Test pulse
The selected altAttribute does not exist!

(png | 12 KB)
Desenhos
Drawings

(png | 79 KB)
Connection diagram

(png | 68 KB)
Correction factors for different mounting situations (approx.)

(png | 125 KB)
Mounting instructions

(png | 114 KB)
Acessórios
Mounting accessories
Sensofix series 12 round

Artigo nº: 10151720
  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel
The selected altAttribute does not exist! Mounting rod with mounting plate holder 200 mm

Artigo nº: 11707685
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod with mounting plate holder 300 mm

Artigo nº: 11707686
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod 200 mm

Artigo nº: 11707688
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod 250 mm

Artigo nº: 11707697
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod with mounting plate holder 250 mm

Artigo nº: 11707698
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod 300 mm

Artigo nº: 11707687
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting plate series 300 and ø12 mm

Artigo nº: 11707701
  • Material: Steel
  • Part of an assembly
The selected altAttribute does not exist! Mounting base

Artigo nº: 11707702
  • Material: Plastic (PA)
  • Part of an assembly
The selected altAttribute does not exist! Two-way connector

Artigo nº: 11707703
  • Material: Plastic (PA)
  • Part of an assembly
Para o topo