2. Resumo dos produtos
  3. Rotary encoders / angle sensors
  4. Tacogeradores HeavyDuty / Resolver
Portfólio de produtos
Design 85 mm – with bearings / solid shaft & compact

Formato 85 mm – apoio próprio / eixo maciço e compacto

TDP0,09 / TDPZ0,09

  • Eixo maciço ø6 mm com flange B10
  • Carcaça ø85 mm
  • Saída de sinal redundante
  • Tensão de saída 10 ... 60 mV por rpm
To the product
Design 115 mm – with bearings / solid shaft & short mounting depth

Formato 115 mm – apoio próprio / eixo maciço e baixa profundidade de instalação

GTF7

  • Eixo maciço ø11 mm com flange EURO B10
  • Tensão de saída 10 ... 60 mV pro rpm
To the product
Design 115 mm – with bearings / solid shaft & robust construction

Formato 115 mm – apoio próprio / eixo maciço e estrutura robusta

TDP0,2 / TDPZ0,2

  • Eixo maciço ø7 ... 14 mm com flange EURO B10
  • Tensão de saída de até 150 mV por rpm
Open in product selector
Design 120 ... 175 mm – with bearings / redundant output

Formato 120 ... 175 mm – apoio próprio / saída redundante

TDP13

  • Eixo maciço ø14 … 18 mm com flange B10
  • Saída de sinal redundante
  • Tensão de saída de até 200 mV por rpm
To the product
Design 52 mm – bearingless kit

Formato 52 mm - sem apoio

GT5

  • Classe de proteção IP 20
  • Formato sem apoio
  • Tensão de saída de até 10 mV por rpm
To the product
Design 85 mm – bearingless kit

Formato 85 mm - sem apoio

GT7.08 / GT7.16

  • Grau de proteção IP 55
  • Formato sem apoio
  • Tensão de saída de até 60 mV por rpm
To the product
Design 89 mm – bearingless kit

Formato 89 mm - sem apoio

GT9

  • Classe de proteção IP 20
  • Formato sem apoio
  • Tensão de saída de até 20 mV por rpm
To the product
Design 95 mm – bearingless kit with high protection

Design 95 mm – bearingless kit with high protection

GTB9.06 / GTB 9.16

  • Protection IP 68
  • Bearingless design
  • Output voltage up to 20 mV / 60 mV per rpm
To the product
The selected altAttribute does not exist!

For Ex areas

EExGP0,2 / TG74d

  • Solid shaft ø11 mm with EURO flange B10
  • Design 126 mm
  • ATEX II 2 G
  • Output voltage up to 150 mV per rpm
Open in product selector
In industrial NEMA 12 housing

In industrial NEMA 12 housing

APY / FAPY

  • For direct replacement of "PY" or "BC" style tachometers
  • Flange or foot mount
  • Output voltage 50 or 100 VDC per 1000 rpm
  • CSA / C / US approved
Open in product selector
Your benefits

HÜBNER Berlin, now Baumer Hübner, has stood for robust tacho generators for almost 70 years and still supplies a wide variety of models to machine manufacturers and spare parts in OEM quality. Even though analog tacho generators have long since been replaced by digital rotary encoders in modern control concepts, LongLife tacho generators still today stand out as an alternative due to their following properties:

  • Special signal quality and service life
    • LongLife commutator thanks to silver track with constantly low contact resistance for high signal quality
    • Specially adapted brushes for maintenance-free operation and long service life
    • Wide adjustable speed range
  • Cost effective
    • Signal transmission with two-core cable, requiring no electrical auxiliary energy and power supply
    • Cost-effective complete package of tacho generators, cable and evaluation electronics
  • Reliable and safe
    • Real-time detection of speed and direction of rotation thanks to analog signal technology
    • Highest availability and unmatched service life under the toughest ambient conditions
    • Proven HeavyDuty principle, bearing at both shaft ends, HeavyDuty connection technology
  • Reliability in any environment
    • Extremely resistant housing with large wall thickness, outstanding corrosion protection, lasting impermeability concept
    • Wide temperature range from –30 °C … +130 °C 
    • Reliable protection against bearing damage
    • Shaft with bearings at both ends, generously dimensioned bearings with large bearing spacing, bearing load reserve capacity for large radial / axial shaft loads
  • Flexible and future-proof
    • Combinations with common shaft are possible:  tacho + rotary encoder, tacho + speed switch
    • Matching spare parts in OEM quality, even for obsolete models, other makes and special designs
       
Applications

Analog tachometers (tacho dynamos, DC tacho generators), usually called “tachos” for short, are devices with an output voltage proportional to the speed. They generate the output voltage by means of a generator, therefore do not require any electrical auxiliary energy and combine high signal dynamics and robustness.

In drive technology, tachos are used to record the actual speed value, for example in the following areas

  • Elevators
  • Escalators
  • Cable cars
  • Rolling mills
  • Presses
  • Crane and lifting systems
Technology
The selected altAttribute does not exist!

LongLife tachos with the silver track

  • HeavyDuty tachogenerators in LongLife technology are based on a silver track embedded in the commutator.
  • LongLife tachogenerators combine the best signal quality for high control dynamics, maximum robustness and unrivaled long service life.
  • The LongLife technology also supports to detect low speeds precisely in real time.
Long-term stable sealing concept

Long-term stable sealing concept

  • The elaborate Baumer HeavyDuty sealing concept allows the protection class IP 66 and IP 67 over a wide temperature range up to +95 °C.
  • Thanks to a sophisticated combination of labyrinth and shaft seals, the HeavyDuty encoders are permanently protected against all types of solid, moist and pasty contamination.
Durable double-sided bearing setup

Durable double-sided bearing setup

  • Thanks to unmatched resistance to axial and radial load, the Baumer concept  of bearings at both shaft ends is well proven and tried and tested for decades in electrical machinery engineering. 
  • Baumer HeavyDuty encoders feature - wherever mechanically feasible - bearings at both encoder shaft ends for unrivalled long service life and maximum mechanical reserve capacity.
Proven HeavyDuty principle

Proven HeavyDuty principle

  • The extremely resilient housings are key for the unrivalled service life and reliability of the Baumer HeavyDuty encoders.
  • These robust housings with solid and thick walls are the perfect protection against outside impacts.
  • The torsion-resistant design is intended to endure high loads by shock and vibration.
Outstanding, sea water resistant corrosion protection

Outstanding, sea water resistant corrosion protection

  • Baumer HeavyDuty rotary encoders are ideally suited for corrosive environments thanks to optimized material selection and highly resistant coatings for successful long-term use, for example near shore and offshore.
  • Their corrosion protection corresponds to categories C4 or CX (C5-M) in accordance with the standard EN ISO 12944.
  • Special equipment options for operation in the arctic, tropics and desert are available on request.
EURO flange B10

EURO flange B10

  • The EURO flange B10 is the global mounting standard for HeavyDuty shaft encoders.
  • Baumer offers a unique portfolio of encoders and tacho generators with  EURO flange B10.
Hübner Berlin – the original from Baumer

Hübner Berlin – the original from Baumer

  • Hübner Berlin, now Baumer Hübner, is the Baumer competence center for HeavyDuty sensors for drive technology.
  • The brand Hübner Berlin represents the global standards for reliable encoders, tacho generators and speed switchtes in proven HeavyDuty technology.
  • More than  60 years of expertise and experience as global market leader merge with cutting-edge technologies in unmatched robust and durable products.
Downloads
Brochures / Catalogs

You may also be interested in
Accessories rotary encoders / angle sensors
Accessories rotary encoders / angle sensors

Accessories

 HeavyDuty encoders incremental
HeavyDuty encoders incremental

Rotary encoders / angle measurement

 HeavyDuty encoders absolute
HeavyDuty encoders absolute

Rotary encoders / angle measurement
To the top