TDP0,2 LT-4 B10 55

Artigo nº: 11070721

Low response time
Open circuit voltage 10…150 mV per rpm
Redundant output (TDPZ)
EURO flange B10 or housing foot B3
Very high resistance to shock
High signal quality due to patented LongLife technology
Recognition of sense of rotation possible via control

Dados técnicos

show all

Dados técnicos - Classificações eléctricas

Reversal tolerance

≤0,1 %

Linearity tolerance

≤0,15 %

Temperature coefficient

± 0,05 %/K (open-circuit)

Isolation class

Calibration tolerance

±1 %

Climatic test

Humid heat, constant (IEC 60068-2-3, Ca)

Performance

12 W (speed ≥3000 rpm)

Armature-circuit time-constant

<75 µs

Open-circuit voltage

60 mV per rpm

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-3

Approval

Dados técnicos - projeto mecânico

Size (flange)

ø115 mm

Shaft type

ø11 mm solid shaft (with key)

Flange

EURO flange B10

Protection EN 60529

IP 55

Operating speed

≤10000 rpm

Torque

1,5 Ncm

Rotor moment of inertia

1,1 kgcm²

Admitted shaft load

≤60 N axial
≤80 N radial

Material

Housing: aluminium die-cast
Shaft: stainless steel

Operating temperature

-30...+130 °C

Resistance

IEC 60068-2-6
Vibration 10 g, 10-2000 Hz
IEC 60068-2-27
Shock 300 g, 1 ms

Weight approx.

2,4 kg

Connection

Terminal box

Downloads

show all

Data sheet

Data sheet – TDP0,2 LT-4 B10 55
- FR (pdf | 804 KB)
Data sheet – TDP0,2 LT-4 B10 55
- DE (pdf | 809 KB)
Data sheet – TDP0,2 LT-4 B10 55
- EN (pdf | 805 KB)

Operating Manual

TDP 0,2, TDPZ 0,2 with EURO flange B10
- DE/EN (pdf | 3 MB)
TDP 0,2, TDPZ 0,2 with housing foot B3
- DE/EN (pdf | 2 MB)

Declaration of conformity

DoC / CoC - Tachogenerators
- DE/EN/FR (pdf | 281 KB)

Acessórios

show all

Mounting accessories

	Spring disk coupling K 35 (shaft ø6...12 mm)	High quality torsionally stiff and backlash free coupling Compensating of mounting errors Balanced torsional rigidity (torsional spring constant) Protection against shaft currents with an insulated hub on non-drive end (ø11 H7) Additional key possible
	Spring disk coupling K 50 (shaft ø11...16 mm)	High quality torsionally stiff and backlash free coupling Compensating of mounting errors Balanced torsional rigidity (torsional spring constant) Protection against shaft currents with an insulated hub on non-drive end (ø11 H7) Additional key possible
	Spring disk coupling K 60 (shaft ø11...22 mm)	High quality torsionally stiff and backlash free coupling Compensating of mounting errors Balanced torsional rigidity (torsional spring constant) Additional key possible