HMG10P-B - SSI | Codeurs absolus | Baumer international

Détection magnétique
Monotour/multitour 20 bits programmable
Fonction diagnostique par LEDs
Détection multitours avec technologie Energy Harvesting "MicroGen", sans réducteur ni batterie
Deux roulements séparés par paliers hybrides
Protection spéciale contre la corrosion CX (C5-M)

Caractéristiques techniques

montrer tous

Caractéristiques électriques

Alimentation

4,75...30 VDC

Protection court-circuit

Courant de service à vide

≤100 mA (SSI)

Temps d'initialisation

≤ 500 ms après mise tension

Interface

Nombre de pas par tour

1048576 / 20 bits

Nombre de tours

1048576 / 20 bits

Sorties supplémentaires

Rectangle TTL/HTL, TTL/RS422

Principe de détection

Magnétique

Code

Gray (régl. d'usine) ou binaire

Sens d'évolution du code

Programmable, régl. d´usine CW

Signaux d'entrée

Horloge SSI, PRESET, sens de rotation

Immunité

EN 61000-6-2

Emission

EN 61000-6-3

Interface de programmation

RS485 (≤600 m)

Paramètres programmables

Résolution mono-/multitour, binaire ou gray code (SSI), sortie supplémentaire (nombre de imp.), désactiver/activer vitesses de commutation

Fonction de diagnostique

Contrôle de fonction

LED Diagnostic

4 LED au dos du produit

Certificat

CE
Certification UL/E217823
EAC

Caractéristiques électriques (Commutateur de vitesse)

Précision de commutation

± 2 % (ou 1 Digit)

Sorties de commutation

1 sortie (collecteur ouvert, relais statique sur demande)

Puissance de commutation

30 VDC; ≤100 mA

Retardement à la commut.

≤20 ms

Caractéristiques mécaniques

Taille (bride)

ø105 mm

Type d’axe

ø16...20 mm (non traversant)
ø17 mm (axe conique 1:10)

Bride

Plaque d'adaptation, 360° librement positionnable

Protection EN 60529

IP 66/IP 67

Vitesse de rotation

≤12000 t/min

Plage de vitesses de commutation

ns (off) = ±2...12000 t/min, réglage d'usine 6000 t/min

Couple en fonctionn. typ.

10 Ncm

Moment d'inertie rotor

950 gcm²

Charge

≤450 N axiale
≤650 N radiale

Matière

Boîtier: aluminium anodisé
Axe: inox

Protection contre la corrosion

IEC 60068-2-52 brouilla. salins
pour les conditions ambiantes CX (C5-M) selon ISO 12944-2

Température d'utilisation

-40...+95 °C

Humidité relative

95 % sans condensation

Résistance

IEC 60068-2-6
Vibrations 30 g, 10-2000 Hz
IEC 60068-2-27
Choc 400 g, 1 ms

Poids

1,6 kg (fonction du version)

Raccordement

Boîte à bornes
Embase mâle M23

Downloads

show all

Data sheet

Fiche technique – HMG10P-B - SSI
- ZH (pdf | 1 MB)
Fiche technique – HMG10P-B - SSI
- FR (pdf | 1 MB)
Fiche technique – HMG10P-B - SSI
- DE (pdf | 1 MB)
Data sheet – HMG10P-B - SSI
- EN (pdf | 1 MB)

Operating Manual

HMG 10 - SSI
- DE (pdf | 8 MB)
HMG 10 - SSI
- EN (pdf | 8 MB)

Declaration of conformity

DoC / CoC - AMG1x, HMG1x, HOG1x, HOG100, HOGS100, PMG10, POG1x
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 280 KB)

3D CAD / CAE

HMG10 SSI, blind hollow shaft ø16 mm, 2x terminal box with cable gland M20 (HMG10x-BHx.6Mxx.xxxxxx)
- (zip | 477 KB)

Accessories

show all

Mounting accessories

	Torque arm M6, length 67...70 mm Article no.: 11043628	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 67...70 mm
	Torque arm M6, length 120...130 mm (≥71 mm) Article no.: 11004078	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 120...130 mm Can be shortened to ≥71 mm
	Torque arm M6, length 425...460 mm (≥131 mm) Article no.: 11002915	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 425...460 mm Can be shortened to ≥131 mm
	Torque arm M6 insulated, length 67...70 mm Article no.: 11054917	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 67...70 mm
	Torque arm M6 insulated, length 120...130 mm (≥71 mm) Article no.: 11072795	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 120...130 mm Can be shortened to ≥71 mm
	Torque arm M6 insulated, length 425...460 mm (≥131 mm) Article no.: 11082677	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 425...460 mm Can be shortened to ≥131 mm
	Mounting kit for torque arm size M6 and earthing strap Article no.: 11077197	Mounting kit for fixing a torque arm size M6 and an earthing strap.
	Mounting and dismounting set Article no.: 11077087	Mounting and dismounting set for fixing a blind hollow shaft encoder to the drive shaft and for dismounting the encoder from the drive shaft.

Connectors and cables

	Sensor cable for encoders HEK 8	The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
	Sensor cable for encoders HEK 17	The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634. The cable can be supplied in any length and pre-fitted with various connectors.
	Mating connector M23, solder version, 12-pin, CCW Article no.: 11068577	Mating connector M23 in solder version (12-pin, female, CCW) for cable connection to the flange connector M23 (12-pin, male, CW).
	Mating connector M23, solder version, 17-pin, CCW Article no.: 11068551	Mating connector M23 in solder version (17-pin, female , CCW) for cable connection to the flange connector M23 (17-pin, male , CW).
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 1 m Article no.: 11172482	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, lenght 1 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 3 m Article no.: 11172481	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 3 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 5 m Article no.: 11172499	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 5 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 10 m Article no.: 11172580	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 10 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (17 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 3 m Article no.: 11172463	Mating connector M23 (17-pin, 17 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 3 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Programming cable for the HMG10P/PMG10P SSI series with flange connector/s Article no.: 11191143	Adapter cable for programming the HMG10P/PMG10P SSI series with flange connector/s With D-SUB connector (male) for connection of encoders of HMG10/PMG10 SSI series with flange connector/s to the WLAN adapter Z-PA.SDL.1. The encoder can be conntected to the WLAN adapter in ONLINE or OFFLINE mode.
	Programming cable for HMG10P/PMG10P (SSI) with terminal box Article no.: 11191144	Adapter cable for programming the HMG10P/PMG10P SSI series with terminal box With D-SUB connector (male) for connection of encoders of HMG10/PMG10 SSI series with terminal box to the WLAN adapter Z-PA.SDL.1 The encoder can be conntected to the WLAN adapter in ONLINE or OFFLINE mode

Programming accessories

Z-PA.SDL.1 - WLAN-Adapter

Article no.: 11190106

Programming unit for HMG10P/PMG10P series
Parametrization of SSI absolute signal, incremental output and speed switch (depending on encoder version)
Monitoring of current position, speed und temperature
Connection over Ethernet or wireless over WLAN
Simple and intuitive use via webbrowser on pc, tablet or smartphone
Fast parameter download

To the top

Codeurs absolus

HMG10P-B - SSI

Axe creux non traversant ou axe conique (1:10) / ST et MT 20 bit