2. Produktübersicht
  3. Drehgeber / Winkelsensoren
  4. HeavyDuty-Drehzahlschalter / -wächter
  5. Elektronische Drehzahlschalter
  6. HOG 10 + ESL 90
Technische Daten
Technische Daten - elektrisch
Wellenisolierung
  • Geeignet bis 2,8 kV
Störfestigkeit
  • EN 61000-6-2
Störaussendung
  • EN 61000-6-3
Technische Daten - elektrisch (Drehgeber)
Betriebsspannung
  • 9...30 VDC; 5 VDC ±5 %
Betriebsstrom ohne Last
  • ≤100 mA
Impulse pro Umdrehung
  • 300 … 5000
Phasenverschiebung
  • 90 ° ±20°
Tastverhältnis
  • 40…60 %
Referenzsignal
  • Nullimpuls, Breite 90°
Ausgabefrequenz
  • ≤120 kHz
  • ≤300 kHz (auf Anfrage)
Ausgangssignale
  • K1, K2, K0 + invertierte
  • Fehlerausgang (Option EMS)
Ausgangsstufen
  • HTL, TTL/RS422
Technische Daten - elektrisch (Drehzahlschalter)
Schaltgenauigkeit
  • ± 4 % (≤1500 U/min)
  • ± 2 % (>1500 U/min)
Schalthysterese
  • = 30 % der Schaltdrehzahl
Schaltausgänge
  • 1 Ausgang, drehzahlgesteuert
Ausgangsschaltleistung
  • ≤6 A / 250 VAC; ≤1 A / 48 VDC
  • (EAC: <50 VAC / 75 VDC)
Minimaler Schaltstrom
  • 100 mA
Schaltverzögerung
  • ≤40 ms
Technische Daten - mechanisch
Baugrösse (Flansch)
  • ø105 mm
Wellenart
  • ø16...20 mm (einseitig offene Hohlwelle)
  • ø17 mm (Konuswelle 1:10)
Zulässige Wellenbelastung
  • ≤450 N axial, ≤600 N radial
Schutzart EN 60529
  • IP 66
Betriebsdrehzahl
  • ≤6000 U/min
Schaltdrehzahlbereich (ns)
  • 650...6000 U/min
Betriebsdrehmoment typ.
  • 6 Ncm
Trägheitsmoment Rotor
  • 680 gcm²
Werkstoff
  • Gehäuse: Aluminium-Druckguss
  • Welle: Edelstahl
Betriebstemperatur
  • -20...+85 °C
Widerstandsfähigkeit
  • IEC 60068-2-6
  • Vibration 5 g, 10-2000 Hz
  • IEC 60068-2-27
  • Schock 50 g, 6 ms
Korrosionsschutz
  • IEC 60068-2-52 Salzsprühnebel
  • für Umgebungsbedingungen C4 nach ISO 12944-2
Wellenisolierung
  • 2,8 kV
Übertragungslänge
  • ≤350 m bei 100 kHz (HTL-P)
  • ≤550 m bei 100 kHz (TTL)
Anschluss
  • 2x Klemmenkasten
  • 3x Klemmenkasten (mit Option M)
Masse ca.
  • 2,3 kg
  • 2,5 kg (mit Option M)
Zulassung
  • CE
Descargas
Data sheet
Operating Manual
Declaration of conformity

Accesorios
Mounting accessories
Mounting kit for torque arm size M6 and earthing strap

Artículo no..: 11077197

Mounting kit for fixing a torque arm size M6 and an earthing strap.
Mounting and dismounting set

Artículo no..: 11077087

Mounting and dismounting set for fixing a blind hollow shaft encoder to the drive shaft and for dismounting the encoder from the drive shaft.
Torque arm M6, length 67...70 mm

Artículo no..: 11043628
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 67...70 mm
Torque arm M6, length 120...130 mm (≥71 mm)

Artículo no..: 11004078
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
Torque arm M6, length 425...460 mm (≥131 mm)

Artículo no..: 11002915
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
Torque arm M6 insulated, length 67...70 mm

Artículo no..: 11054917
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 67...70 mm
Torque arm M6 insulated, length 120...130 mm (≥71 mm)

Artículo no..: 11072795
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
Torque arm M6 insulated, length 425...460 mm (≥131 mm)

Artículo no..: 11082677
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
Connectors and cables
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
Diagnostic accessories
Analyzer for encoders HENQ 1100

Artículo no..: 11075858
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Artículo no..: 11075880
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Hasta la cima