The DLM series offers the right solution for any type of force measurement. The standard portfolio consists of three designs: button, inline, and screw-on. The button variation is suitable for measuring compressive forces, while the inline and screw-on versions are designed for static force measurement as well as dynamic compressive and tensile forces. Thus, inline and screw-on sensors are optimized for alternating force directions. The force sensors cover measurement ranges from 0 to 50N and 0 to 20,000N. Thanks to their small dimensions the force sensors can be used even when space is limited.
Measuring amplifiers are used for signal transmission between force sensors and the control system. They convert the electrical signal into analog values. In addition to our sensors, we offer measuring amplifiers and cables, thus enabling the simple implementation of the complete measuring chain. Depending on the input card the measuring amplifier is available with current or voltage output. In addition, we offer the corresponding accessories such as connection cables for simple and fast connection to the process.
DMS-based force sensors, also known as force transducers or load cells, are the ideal solution for force measurement in most applications. In principle, they are especially useful when it comes to measuring small forces. With its optimally coordinated product portfolio of force sensors for 0 – 20,000 N, Baumer covers a multitude of applications. Thanks to their robust sensor bodies they can also be used in areas with high demands. In addition to force sensors, Baumer produces strain sensors for measuring higher forces, which are simple to install in the respective structure.
Federkörper-Kraftaufnehmer bestehen in der Regel aus einem Federkörper und Dehnungsmessstreifen (DMS). Unter Krafteinwirkung verformt sich der elastische Körper des Sensors, sodass an der Materialoberfläche Dehnungen enstehen. Mittels auf der Oberfläche des Federkörpers applizierten DMS wird diese Dehnung abgegriffen. Die Dehnungsmessstreifen wandeln dabei die mechanische Dehnung in eine elektrische Widerstandsänderung um und wirken als mechanisch-elektrischer Konverter. Durch die intelligente Verschaltung der einzelnen DMS zu einer Wheatstone’sche Messbrücke können so selbst kleinste Dehnungen erfasst und hohe Genauigkeiten erzielt werden. Die gemessene Dehnung erzeugt so eine der Kraft proportionale Spannungsänderung. Im Vergleich zu Dehnungssensoren bei denen über die elastische Verformung der Maschinenstruktur eine indirekte Kraftmessung erfolgt, werden Kraftsensoren direkt in den Kraftfluss montiert, was auch als direkte Kraftmessung bezeichnet wird.
Flyer – Kraftmessung einfach realisiert