Technical data
general data
mounting type
  • flush
special type
  • linearized
  • Vehicle
measuring distance Sd
  • 0 … 8 mm
sensitivity
  • 0,5 V/mm
resolution
  • < 0,008 mm (stat.)
  • < 0,01 mm (dynam.)
repeat accuracy
  • < 0,016 mm
linearity error
  • ± 120 µm
temperature drift
  • ± 8 % (Full Scale)
approvals/certificates
  • EN 60947-5-2:2007
  • EN 13309:2010
  • EN ISO 14982:2009
  • ISO 13766:2006
electrical data
response time (factory characteristic)
  • < 1 ms
voltage supply range +Vs
  • 7 … 32 VDC
current consumption max. (no load)
  • 15 mA
output circuit
  • voltage output
output signal
  • 0,5 ... 4,5 VDC
load resistance
  • > 900 Ohm
short circuit protection
  • yes
reverse polarity protection
  • no
conducted interferers
  • ISO 7637-2, ISO 16750-2, details see data sheet
mechanical data
type
  • cylindrical threaded
housing material
  • brass nickel plated
dimension
  • 18 mm
housing length
  • 50 mm
connection types
  • cable, 2 m
tightening torque max.
  • 40 Nm (A: 28 Nm, B: 28 Nm)
ambient conditions
operating temperature
  • -40 … +85 °C
protection class
  • IP 69K (sensing face/sensor)

Downloads
data sheet
3D CAD data
Certificates / approvals

Drawings

dimension drawing

connection diagram

pin assignment


Accessories
mounting accessories
10151658
Sensofix series 18, Mounting accessories

Article no.: 10151658

  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel

ZADAP-M18.STANDARD
Mounting bracket series 18, Mounting accessories

Article no.: 11172096

  • Material: Steel galvanized

ZADAP-M18.SHORT
Mounting bracket short series 18 (L design), Mounting accessories

Article no.: 11171584

  • Material: Steel galvanized

ZADAP-M18.LONG
Mounting bracket long series 18 (L design), Mounting accessories

Article no.: 11172095

  • Material: Steel galvanized


To the top