Technical data
general data
resolution
  • 752 × 480 px
sensor type
  • 1/3″ CMOS, monochrome
illumination
  • integrated, LED infrared (860 nm)
LED class
  • free group (risk free, EN 62471:2008)
high-resolution mode
  • max. 50 inspections per second
high-speed mode (limited resolution)
  • max. 100 inspections per second
object distance min.
  • 50 mm
object distance max.
  • 450 mm
number of jobs (products)
  • ≤ 255
features per job
  • 32
signal processing
  • Baumer FEX® 4.0
defect image memory
  • 32
lens
  • 12 mm
electrical data
nominal voltage power supply
  • 24 V +- 25%
nominal voltage power supply (add-on)
  • Class 2 according to NEC / protection class III
nominal voltage power supply (info)
  • The device is intended for supply from an isolated limited power source according to UL61010-1, 3rd ed cl. 9.4 or a limited energy source according to UL60950-1 or Class 2 according to NEC.
power consumption
  • max. 18 W (with I/O)
inputs
  • 8 … 30 V (polarity protected)
digital inputs
  • 5 inputs
  • trigger
  • job selection
  • external teach-in
  • encoders (CH-A, CH-B) 500 kHz
outputs
  • PNP Ipeak = 100 mA and Ieff = 50 mA (short-circuit proof)
digital outputs
  • 5 outputs
  • Pass / Fail
  • Flash Sync
  • Alarm
  • Camera Ready
  • Output Enable
initial setup
  • Ethernet (10BASE-T / 100BASE-TX)
process interface
  • PROFINET (CC-A)
  • EtherNet/IP
  • TCP/UDP (Ethernet)
visualization
  • configurable web interface with MultiViewer function
mechanical data
width
  • 53 mm
height
  • 99,5 mm
depth
  • 38 mm
weight
  • ≤ 250 g
material
  • housing: aluminum
  • cover glass: PMMA, integrated daylight filter (780 nm)
environmental conditions
operating temperature
  • +5 … +60 °C @ T = measurement point
storage temperature
  • -20 … +70 °C
humidity
  • 0 … 90 % (non-condensing)
protection class
  • IP 67
vibration load
  • IEC 60068-2-6
  • IEC 60068-2-64
mechanical shock resistance
  • EN 60068-2-27
feature checks
part location
  • part location on contours
  • part location on edges
  • part location on circle
  • part location on text line
geometry
  • distance
  • circle
  • angle
  • count edges
  • point position
  • edge characteristics
feature comparison
  • count contour points
  • contour comparison
  • brightness
  • contrast
  • area size
  • count areas
  • pattern comparison
  • find object positions
conformity
conformity
  • CE
  • RoHS
  • UL
non-volatile memory
flash memory size
  • 2000 Mbit Flash S34ML02G100BHI0000

Downloads
Data sheet
manual
  • Technical documentation VeriSens vision sensors

software
Installation and operating instructions
Certificates / approvals
3D CAD
additional information

Drawings

dimension drawing

electrical connection M12 / 12-pin, A-coded (on device)

Ethernet connection M12 / 4-pin (on device)


Accessories
power supply
Power supply – Power Supply 24V/1.0A Int. DC Connector Power Supply 24V/1.0A Int. DC Connector

Article no.: 11079750

  • power supply 24V/1,0A with adapters for EU, US, UK AU, KR
  • in combination with "Cable power adapter M12/DC connector" (11048083) suitable for VCXG.I(.XT), VLXT and VeriSens
Starter Kit
Starter kits – Starter Kit VeriSens Universal Starter Kit VeriSens Universal

Article no.: 11075442

  • confectioned connection cable M12/12-pin with power supply 24V/1.0A
  • Ethernet cable
  • 90° angled fixation bracket incl. screws
  • screw driver
  • Application Suite (Windows) via Download
  • VeriSens not included
panel PC
Panel PC – ZVP-All_in_one_PC.DE – ZVP-All_in_one_PC.EN – ZVS-USB Stick URCap ZVP-All_in_one_PC.DE
X-PPC-710 DE

Article no.: 11122988

  • Panel PC for VeriSens® incl. stylus
  • German operating system
Panel PC – ZVP-All_in_one_PC.DE – ZVP-All_in_one_PC.EN – ZVS-USB Stick URCap ZVP-All_in_one_PC.EN
X-PPC-710 EN

Article no.: 11093293

  • Panel PC for VeriSens® incl. stylus
  • English operating system
Panel PC – Stylus triple pack Stylus triple pack

Article no.: 11098058

  • set of 3 Stylus touchpens in premium chrome design for touchscreen
lens accessories
Lenses / Lens accessories – ZVF-Filter Pol. VeriSens ID CS XF ZVF-Filter Pol. VeriSens ID CS XF

Article no.: 11161075

  • Attachable polarization filter for VeriSens ID, CS and XF series
  • Only to use with white illumination. Please note that only about 20% of the light reaches the image sensor when a polarization filter is used.
cable
Cables – ESG 34JP2000GS – ESG 34JP1000GS – ESG 34JP0200GS – ESG 34JP0500GS ESG 34JP0200GS
Shielded cable 12 wires, female connector, 2,0 m

Article no.: 11201118

  • shielded process interface cable
  • M12/12-pin female connector to open wires
  • cable carrier compatible
  • suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
  • length 2,0 m
Cables – ESG 34JP2000GS – ESG 34JP1000GS – ESG 34JP0200GS – ESG 34JP0500GS ESG 34JP0500GS
Shielded cable 12 wires, female connector, 5,0 m

Article no.: 11195097

  • shielded process interface cable
  • M12/12-pin female connector to open wires
  • cable carrier compatible
  • suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
  • length 5,0 m
Cables – ESG 34JP2000GS – ESG 34JP1000GS – ESG 34JP0200GS – ESG 34JP0500GS ESG 34JP1000GS
Shielded cable 12 wires, female connector, 10,0 m

Article no.: 11195098

  • shielded process interface cable
  • M12/12-pin female connector to open wires
  • cable carrier compatible
  • suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
  • length 10,0 m
Cables – ESG 34JP2000GS – ESG 34JP1000GS – ESG 34JP0200GS – ESG 34JP0500GS ESG 34JP2000GS
Shielded cable 12 wires, female connector, 20,0 m

Article no.: 11195099

  • shielded process interface cable
  • M12/12-pin female connector to open wires
  • cable carrier compatible
  • suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
  • length 20,0 m
ESW 33JP0200GS
90° shielded cable 12 wires, female connector, 2,0 m

Article no.: 11201128

  • shielded process interface cable
  • 90° angled M12/12-pin female connector to open wires
  • cable carrier compatible
  • suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
  • length 2,0 m
ESW 33JP0500GS
90° shielded cable 12 wires, female connector, 5,0 m

Article no.: 11195094

  • shielded process interface cable
  • 90° angled M12/12-pin female connector to open wires
  • cable carrier compatible
  • suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
  • length 5,0 m
ESW 33JP1000GS
90° shielded cable 12 wires, female connector, 10,0 m

Article no.: 11195095

  • shielded process interface cable
  • 90° angled M12/12-pin female connector to open wires
  • cable carrier compatible
  • suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
  • length 10,0 m
ESW 33JP2000GS
90° shielded cable 12 wires, female connector, 20,0 m

Article no.: 11195096

  • shielded process interface cable
  • 90° angled M12/12-pin female connector to open wires
  • cable carrier compatible
  • suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
  • length 20,0 m
Cables – Z-KSG 34A/KSG45AC0500G/E – Z-KSG 34A/KSG45AC1000G/E Z-KSG 34A/KSG45AC0500G/E
Ethernet cable for cable carriers, 5,0 m

Article no.: 11120360

  • shielded Ethernet cable
  • straight M12/4-pin male connector to RJ45
  • cable carrier compatible
  • length 5,0 m
  • Phase-Out starting 08/20, alternative via sales
Cables – Z-KSG 34A/KSG45AC0500G/E – Z-KSG 34A/KSG45AC1000G/E Z-KSG 34A/KSG45AC1000G/E
Ethernet cable for cable carriers, 10,0 m

Article no.: 11120361

  • shielded Ethernet cable
  • straight M12/4-pin male connector to RJ45
  • cable carrier compatible
  • length 10,0 m
  • Phase-Out starting 08/20, alternative via sales
Cables – KSG 34A/KSG45AP0200G – KSG 34A/KSG45AP0500G – KSG 34A/KSG45AP1000G/E KSG 34A/KSG45AP0500G
Ethernet cable, 5,0 m

Article no.: 10165276

  • shielded Ethernet cable
  • straight M12/4-pin male connector to RJ45
  • length 5,0 m
  • Phase-Out starting 08/20, alternative via sales
Cables – KSG 34A/KSG45AP0200G – KSG 34A/KSG45AP0500G – KSG 34A/KSG45AP1000G/E KSG 34A/KSG45AP0200G
Ethernet cable, 2,0 m

Article no.: 11048502

  • shielded Ethernet cable
  • straight M12/4-pin male connector to RJ45
  • length 2,0 m
  • Phase-Out starting 08/20, alternative via sales
Cables – KSW 33A/KSG45AP0200G/E – KSW 33A/KSG45AP0500G/E – KSW 33A/KSG45AP1000G/E KSW 33A/KSG45AP0200G/E
90° angled Ethernet cable, 2,0 m

Article no.: 11048592

  • shielded Ethernet cable
  • 90° angled M12/4-pin male connector to RJ45
  • length 2,0 m
  • Phase-Out starting 08/20, alternative via sales
Cables – KSW 33A/KSG45AP0200G/E – KSW 33A/KSG45AP0500G/E – KSW 33A/KSG45AP1000G/E KSW 33A/KSG45AP0500G/E
90° angled Ethernet cable, 5,0 m

Article no.: 11048594

  • shielded Ethernet cable
  • 90° angled M12/4-pin male connector to RJ45
  • length 5,0 m
Cables – KSG 34A/KSG45AP0200G – KSG 34A/KSG45AP0500G – KSG 34A/KSG45AP1000G/E KSG 34A/KSG45AP1000G/E
Ethernet cable, 10,0 m

Article no.: 11051929

  • shielded Ethernet cable
  • straight M12/4-pin male connector to RJ45
  • length 10,0 m
  • Phase-Out starting 08/20, alternative via sales
Cables – KSW 33A/KSG45AP0200G/E – KSW 33A/KSG45AP0500G/E – KSW 33A/KSG45AP1000G/E KSW 33A/KSG45AP1000G/E
90° angled Ethernet cable, 10,0 m

Article no.: 11051950

  • shielded Ethernet cable
  • 90° angled M12/4-pin male connector to RJ45
  • length 10,0 m
Cables – Cable Power Adapter M12/DC Connector Cable Power Adapter M12/DC Connector

Article no.: 11048083

  • shielded adapter connection cable
  • M12/12-pin male connector to confectioned DC connector
  • length 2,0 m
  • manufactured cable: 11201118 ESG 34JP0200GS
mountings and heat sinks
Mountings / Heat sinks – VeriSens® laboratory stand VeriSens laboratory stand

Article no.: 11051407

  • stand for VeriSens
  • content: articulated arm, baseplate, one white and one black underlayment, VeriSens mounting with 2 screws (hexagon socket)
  • max. hight of device mounting approx. 28 cm
Mountings / Heat sinks – VS Mounting Adapter – ZVM-Mounting Adapter Smartgrid 90° – ZVM-Mounting Adapter VS UR – ZVM-Mounting Adapter VS UR 90° VS Mounting Adapter

Article no.: 11177010

  • Fixation bracket for VeriSens vision sensors incl. screws (hexagon socket) and washers
  • 90° angled
illumination accessories
Illumination / Illumination accessories – ZVI-LUMIMAX T1 Adapterkabel VeriSens ZVI-LUMIMAX T1 AdapterCable Illumination
Adapter cable for illumination

Article no.: 11175008

Illumination / Illumination accessories – ZVI-VB_Fix_Kit_Industrial_Light ZVI-VB_Fix_Kit_Industrial_Light
Illumination fixation kit

Article no.: 11076264

  • VeriSens® illumination fix kit
  • Scales for the documentation of the application setup, also for its replication
  • Use in combination with illumination adapter (for LUMIMAX Spot5W: ZVI-Fix_Kit_Adapter_Spot5W (11175009))
  • Length: 130 mm
Illumination / Illumination accessories – ZVI-Fix_Kit_Adapter_Spot5W ZVI-Fix_Kit_Adapter_Spot5W

Article no.: 11175009

  • mounting adapter to mount LUMIMAX Spot5W illuminations to ZVI-VB_Fix_Kit_Industrial_Light (11076264)
illumination
Illumination / Illumination accessories – ZVI_LED Spot5WFL-B/SPS-220 – ZVI_LED Spot5WFL-IR850/SPS-220 – ZVI_LED Spot5WFL-R/SPS-220 – ZVI_LED Spot5WFL-W/SPS-100 – ZVI_LED Spot5WFL-W/SPS-220 – ZVI_LED Spot5W-W ZVI-LED Spot5WFL-W/SPS-220

Article no.: 11175031

  • LED spot light
  • white
  • 19… 30 V
  • cable length: 0,15 m
  • diameter: 34 mm
  • adjustable glass optics for spot or broad light
  • integrated flash controller and potentiometer (brightness and exposure time)
  • direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-adapter cable illumination (11175008))
  • maximum exposure time 220 µs (maximum frequency 35 Hz)
Illumination / Illumination accessories – ZVI_LED Spot5WFL-B/SPS-220 – ZVI_LED Spot5WFL-IR850/SPS-220 – ZVI_LED Spot5WFL-R/SPS-220 – ZVI_LED Spot5WFL-W/SPS-100 – ZVI_LED Spot5WFL-W/SPS-220 – ZVI_LED Spot5W-W ZVI-LED Spot5WFL-R/SPS-220

Article no.: 11175034

  • LED spot light
  • red
  • 19… 30 V
  • cable length: 0,15 m
  • diameter: 34 mm
  • adjustable glass optics for spot or broad light
  • integrated flash controller and potentiometer (brightness and exposure time)
  • direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-adapter cable (11175008))
  • maximum exposure time 220 µs (maximum frequency 35 Hz)
Illumination / Illumination accessories – ZVI_LED Spot5WFL-B/SPS-220 – ZVI_LED Spot5WFL-IR850/SPS-220 – ZVI_LED Spot5WFL-R/SPS-220 – ZVI_LED Spot5WFL-W/SPS-100 – ZVI_LED Spot5WFL-W/SPS-220 – ZVI_LED Spot5W-W ZVI-LED Spot5WFL-IR850/SPS-220

Article no.: 11175035

  • LED spot light
  • infrared
  • 19… 30 V
  • cable length: 0,15 m
  • diameter: 34 mm
  • adjustable glass optics for spot or broad light
  • integrated flash controller and potentiometer (brightness and exposure time)
  • direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-Adapter cable illumination (11175008))
  • maximum exposure time 220 µs (maximum frequency 35 Hz)
Illumination / Illumination accessories – ZVI_LED Spot5WFL-B/SPS-220 – ZVI_LED Spot5WFL-IR850/SPS-220 – ZVI_LED Spot5WFL-R/SPS-220 – ZVI_LED Spot5WFL-W/SPS-100 – ZVI_LED Spot5WFL-W/SPS-220 – ZVI_LED Spot5W-W ZVI-LED Spot5WFL-B/SPS-220

Article no.: 11175036

  • LED spot light
  • blue
  • 19… 30 V
  • cable length: 0,15 m
  • diameter: 34 mm
  • adjustable glass optics for spot or broad light
  • integrated flash controller and potentiometer (brightness and exposure time)
  • direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-Adapter cable illumination (11175008))
  • maximum exposure time 220 µs (maximum frequency 35 Hz)

To the top