optoPulse ExEIL580P-SY

Taille ø58 mm
Précise détection optique (interpolée)
Niveau signal de sortie programmable (TTL ou HTL)
Bride synchro
Raccordement axial, radial ou tangentiel
Impulsions par tour 1...65536, programmable
Haute résistance aux chocs et aux vibrations
Option 0122, protection contre les explosions zone 22

disponibles sur demande

Caractéristiques techniques

montrer tous

Caractéristiques électriques

Alimentation

4,75...30 VDC

Protection contre l'inversion de polarité

Protection court-circuit

Courant de service à vide

≤70 mA

Temps d'initialisation

≤ 30 ms après mise tension

Impulsions par tour

1 … 65536

Période

45…55 % typique à 1024, 2048 impulsions (autre cf. le tableau Période)

Signal de référence

Top zéro 90° ou 180°

Principe de détection

Optique

Fréquence de sortie

≤300 kHz (TTL)
≤160 kHz (HTL)

Signaux de sortie

A+, B+, R+, A-, B-, R-

Etage de sortie

TTL/RS422
HTL/Push-pull

Paramètres programmables

Niveau de sortie TTL/HTL
Nombre d'impulsions 1...65536
Top zéro largeur 90°/180°
Position d'impulsion zéro
Séquence de signaux

Immunité

EN 61000-6-2

Emission

EN 61000-6-3

Caractéristiques mécaniques

Taille (bride)

ø58 mm

Type d’axe

ø6 x 10 mm, axe avec méplat

Charge

≤40 N axiale
≤80 N radiale

Bride

Bride synchro

Protection EN 60529

IP 65

Vitesse de rotation

≤12000 t/min (+20 °C)
≤11000 t/min (+40 °C)
≤8000 t/min (+60 °C)

Couple de démarrage

≤0,015 Nm (+20 °C)

Matière

Boîtier: fonte d'aluminium
Bride: aluminium
Axe plein: Acier inox

Température ambiante

-20...+60 °C

Humidité relative

90 % sans condensation

Résistance

EN 60068-2-6
Vibrations 30 g, 10-2000 Hz
EN 60068-2-27
Choc 300 g, 6 ms

Protection contre les explosions

II 3 D Ex tc IIIC T135°C Dc X (poussière): voir conditions particulières « X »

Raccordement

Embase mâle M12, 8 points
Embase mâle M23, 12 points
Câble

Poids

300 g

Téléchargements

montrer tous

Fiche technique

Fiche technique – ExEIL580P-SY
- DE (pdf | 3 MB)
Fiche technique – ExEIL580P-SY
- EN (pdf | 2 MB)
Fiche technique – ExEIL580P-SY
- FR (pdf | 2 MB)

Guide rapide

- DE/EN (pdf | 1 MB)

Certifications / Approbations

UL certificat E240061
- EN (pdf | 668 KB)

Brochures / Catalogues

EIL580P Programmable
- DE (pdf | 928 KB)
EIL580P Programmable
- EN (pdf | 927 KB)
EIL580P Programmable
- FR (pdf | 929 KB)

Declaration of conformity

DoC / CoC - ExEIL580
- DE/EN/FR/BG/CZ/DK/ES/FI/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SI/SK (pdf | 291 KB)

Logiciel

Encoder Software v3.3 05.07.16
- (zip | 6 MB)

3D CAD / CAE

EIL580: Bride synchro (flûte ø53 mm), axe ø6 mm, câble axial, IP65 / STEP (EIL580-SY06.5Tx.xxxxx.A)
- (zip | 1 MB)
EIL580: Bride synchro (flûte ø53 mm), axe ø6 mm, câble radial, IP65 / STEP (EIL580-SY06.5Rx.xxxxx.A)
- (zip | 1 MB)
EIL580: Bride synchro (flûte ø53 mm), axe ø6 mm, câble tangentiel, IP65 / STEP (EIL580-SY06.5Px.xxxxx.A)
- (zip | 921 KB)
EIL580: Bride synchro (flûte ø53 mm), axe ø6 mm, connecteur M12 axial, IP65 / STEP (EIL580-SY06.5Ax.xxxxx.A)
- (zip | 951 KB)
EIL580: Bride synchro (flûte ø53 mm), axe ø6 mm, connecteur M12 radial, IP65 / STEP (EIL580-SY06.5Bx.xxxxx.A)
- (zip | 955 KB)
EIL580: Bride synchro (flûte ø53 mm), axe ø6 mm, connecteur M23 axial, IP65 / STEP (EIL580-SY06.5Dx.xxxxx.A)
- (zip | 495 KB)
EIL580: Bride synchro (flûte ø53 mm), axe ø6 mm, connecteur M23 radial, IP65 / STEP (EIL580-SY06.5Fx.xxxxx.A)
- (zip | 1 MB)

Accessories

show all

Accessoires de montage

	Accouplement CPS25 (L=19, D1=06 / D2=06) Pour les codeurs à axe plein Article no.: 11065916	Accouplement de précision Accouplement rigide en torsion avec faible profondeur de montage Enfichable Disque central électriquement isolant Adapté aux vitesses de rotation très élevées
	Accouplement CPS25 (L=19, D1=06 / D2=08) Pour les codeurs à axe plein Article no.: 11065917	Accouplement de précision Accouplement rigide en torsion avec faible profondeur de montage Enfichable Disque central électriquement isolant Adapté aux vitesses de rotation très élevées
	Accouplement CPS25 (L=19, D1=10 / D2=06) Pour les codeurs à axe plein Article no.: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=11 / D2=06) For encoder with solid shaft Article no.: 11065926	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=12 / D2=06) For encoder with solid shaft Article no.: 11065928	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=6) For encoder with solid shaft Article no.: 10141131	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Article no.: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=16) For encoder with solid shaft Article no.: 11034139	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Article no.: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Mounting adaptor for encoders with synchro flange Article no.: 10117667	Glass-fiber reinforced plastic excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings for mounting clamp (10117667) Article no.: 10117668	With 3x eccentric fixings, screws and nuts
	Set of eccentric fixings type A Article no.: 11065545
	Bearing flange for encoders with synchro flange (Z 119.035) Article no.: 10158124	For all encoder with synchro flange and 6 mm shaft Material: Aluminium, bare

Connectors and cables

Female connector M23 with pin lock, 12-pin, CW

Article no.: 11141051

Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)).
Knurled nut with pin lock
EMC version
Temperature range -40...+100 °C

Programming accessories

	Handheld Programming Tool Z-PA-EI-H Article no.: 11120657	Battery operated stand-alone solution Intuitive, fully menu-driven programming Four user-assigned buttons for simple and quick programming Memory of several encoder configurations Backlit display LED status indicator Encoder diagnostic functions
	PC Programming Tool Z-PA-EI-P Article no.: 11120547	PC Programming Tool incl. Encoder Software Easy and intuitive operation Memory of several encoder configurations Encoder diagnostics with monitor output USB powered Product documentation by printing customized product labels
	Connection cable connector M12 / connector D-SUB, 0.2 m Article no.: 11119280	Connecting cable shielded with connector M12, 8-pin, female contacts on connector D-SUB, 9-pin, male contacts
	Connection cable connector M12 / connector D-SUB, 1 m Article no.: 11119720	Connecting cable shielded with connector M12, 8-pin, female contacts on connector D-SUB, 9-pin, male contacts
	Connection cable connector M23 (CW) / connector D-SUB, 0.2 m Article no.: 11119257	Connecting cable shielded with connector M23, 12-pin, female contacts, clockwise (CW) on connector D-SUB, 9-pin, male contacts
	Connection cable connector M23 (CW) / connector D-SUB, 1 m Article no.: 11119723	Connecting cable shielded with connector M23, 12-pin, female contacts, clockwise (CW) on connector D-SUB, 9-pin, male contacts