2. Product Overview
  3. Rotary encoders / angle sensors
  4. Bearingless encoders
  5. Magnetic ring encoder HeavyDuty
  6. MIR3000F
Product portfolio
High-resolution magnetic belt encoder for large shaft diameters – Flexible magnetic belt mounting – for shafts up to 3183 mm – Incremental – for shafts up to 3183 mm – Quasi-absolute – for large shafts up to 3183 mm – Flexible magnetic belt mounting – for shafts up to 3183 mm

Incremental – for shafts up to 3183 mm

MIR3000F

  • Square wave and SinCos signals
  • Up to 131 072 ppr
To the product
The selected altAttribute does not exist!

Incremental – for shafts up to 300 mm

MIR 350A

  • Square wave and SinCos signals
  • Up to 131 072 ppr
To the product
High-resolution magnetic belt encoder for large shaft diameters – Flexible magnetic belt mounting – for shafts up to 3183 mm – Incremental – for shafts up to 3183 mm – Quasi-absolute – for large shafts up to 3183 mm – Flexible magnetic belt mounting – for shafts up to 3183 mm

Quasi-absolute – shafts up to 3183 mm

MQR3000F

  • SSI interface
  • Resolution singleturn ≤ 24 bits
  • Additional speed signal via SSI
To the product
The selected altAttribute does not exist!

Quasi-absolute – shafts up to 300 mm

HDmag MQR 350A

  • SSI interface
  • Resolution singleturn ≤ 20 bits
  • Additional speed signal via SSI
To the product
Video “Flexible magnetic belt installation”
 

The HDmag flex magnetic belt encoders MIR 3000F and MQR 3000F are a revolutionary and particularly cost-effective solution for measuring the precise position and speed of shafts with large diameters.

Your benefits
  • Most efficient and viable technology for large shaft diameters
    • Easily installed in an instant, no need to dismount the shaft thanks to flexible magnetic measure
  • High durability even in adverse environments
    • Wear-free, magnetic sensing, fully encapsulated electronics as protection against ambient impacts
  • Efficient control and regulation
    • Real-time signal processing, constantly high signal quality, digital speed output
  • High flexibility
    • Air gap tolerances: axial ±5 mm, radial 1 ... 3 mm
  • Detecting even the slightest creep movement
    • Detecting speeds down to 0.003 rpm
Applications

The magnetic belt encoder is designed for heavy-duty use on large shafts:

  • Wind power plants
  • Hydro power stations
  • Large drives (rolling mills, steel mills)
  • Generators
  • Azimuth drives (POD)
  • Crane systems
  • Paper machines
Downloads
Brochures / Catalogs

To the top