2. Apercu des produits
  3. Détection d’objets
  4. Barrières photoélectriques et détecteurs réflex
  5. Miniatures
  6. Miniatures
  7. O300H.RP.T-GW1J.PVNV
Caractéristiques techniques
Données générales
Fonction
  • Barrière réflex
Exécution spéciale
  • Design hygiénique
Version
  • Détection d’objet transparent
Source lumineuse
  • LED PinPoint, pulsée
Portée de service Sb
  • 3,5 m
Limite de portée Sn
  • 4 m
Filtre de polarisation
  • Oui
L'atténuation du signal minimum
  • 10 % / 20 % / 30 %
Indication réception
  • LED jaune
Indication de fonctionnement
  • LED verte
Réglage sensibilité
  • Teach-in et IO-Link
Longueur d'ondes
  • 630 nm
Suppression influence réciproque
  • Oui
Axe d'alignement optique
  • < 2°
Autorisations/certificats
  • Ecolab
  • Adapted from EHEDG
Données électriques
Temps d'activation / désactivation
  • < 0,25 ms
Plage de tension +Vs
  • 10 … 30 VDC
Consommation max. (sans charge)
  • 35 mA
Courant absorbé moyen
  • 30 mA
Tension résiduelle Vd
  • < 3 VDC
Fonction de commutation
  • Claire/sombre
Circuit de sortie
  • Push-pull
Courant de sortie
  • < 100 mA
Protégé contre courts-circuits
  • Oui
Protégé contre inversion polarité
  • Oui
Données mécaniques
Largeur / Diamètre
  • 16,5 mm
Hauteur / Longueur
  • 34,6 mm
Profondeur
  • 28,7 mm
Forme du boîtier
  • Parallélépipédique
Matériau du boîtier
  • Acier inoxydable 1.4404 (V4A)
Face avant (optique)
  • PMMA
Version de raccordement
  • Connecteur déporté M8, L=200 mm
Conditions ambiantes
Température de fonctionnement
  • -25 … +60 °C
Classe de protection
  • IP 68/69K & proTect+
Téléchargements
Fiche technique
Guide rapide
Instructions d'utilisation
Certifications / Approbations
Logiciel
3D CAD / CAE

Diagrammes
Courbe réserve de fonctionnement

(png | 225 KB)

(png | 215 KB)
Dessins
Dessins

(png | 78 KB)
Connection diagram

(png | 107 KB)
Pin assignment

(png | 66 KB)
Beam characteristic (typically)

(png | 109 KB)
Accessories
Reflectors
FTDR 047W047
Stainless steel reflector for retro-reflective sensor in hygiene design

Article no.: 11149760
  • Stainless steel reflector for retro-reflective sensor in hygiene design
  • EHEDG-certified
Peripherals
IO-Link Master – IO-Link Master EtherNet/IP, 8-Port, IP67 – IO-Link Master PROFINET, 8-Port, IP67 – IO-Link Master PROFINET – IO-Link Master EtherNet/IP IO-Link Master PROFINET, 8-Port, IP67

Article no.: 11215447
  • Suitable for field use with IP67
  • 8 flexibly assignable ports enable various control concepts
  • Interface diversity with 2x PROFINET, Modbus TCP and OPC UA
IO-Link Master – IO-Link Master EtherNet/IP, 8-Port, IP67 – IO-Link Master PROFINET, 8-Port, IP67 – IO-Link Master PROFINET – IO-Link Master EtherNet/IP IO-Link Master EtherNet/IP, 8-Port, IP67

Article no.: 11215460
  • Field device with IP67
  • 8 ports for integrating the sensors for IO-Link communication or digital I/O
  • 2 EtherNet/IP interfaces
  • Supports Modbus TCP and OPC UA
IO-Link Master – IO-Link Master EtherNet/IP, 8-Port, IP20 – IO-Link Master PROFINET, 8-Port, IP20 – IO-Link Master PROFINET – IO-Link Master EtherNet/IP IO-Link Master PROFINET, 8-Port, IP20

Article no.: 11215445
  • Suitable for control cabinet thanks to IP20
  • 8 flexibly assignable ports enable various control concepts
  • Interface diversity with 2x PROFINET, Modbus TCP and OPC UA
IO-Link Master – IO-Link Master EtherNet/IP, 8-Port, IP20 – IO-Link Master PROFINET, 8-Port, IP20 – IO-Link Master PROFINET – IO-Link Master EtherNet/IP IO-Link Master EtherNet/IP, 8-Port, IP20

Article no.: 11215448
  • For the control cabinet with IP20
  • 8 ports for integrating the sensors for IO-Link communication or digital I/O
  • 2 EtherNet/IP interfaces
  • Supports Modbus TCP and OPC UA
     
ZTEST-ALL.DIGITAL
Test unit for sensors digital

Article no.: 11084377
  • LED (red/green) for digital PNP/NPN signals
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
ZTEST-ALL.ANALOG
Test unit for sensors analog & digital

Article no.: 11084376
  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
ZTOOL-ALL.TPEN
Teach Pen for sensors in metal housing

Article no.: 11137318
  • Local Teach-in of sensors in metal housing
ZTOOL-ALL.TPENJP
Teach Pen for sensors in metal housing (USA, CAN, JP)

Article no.: 11141124
  • Local Teach-in of sensors in metal housing
USB IO-Link Master
USB IO-Link Master

Article no.: 11048016
  • Integration of IO-Link sensors via USB
  • Including power supply (EU, KOR, USA, AUS, UK) and USB cable
Peripherals – SensControl – Wireless IO-Link master and app – Wireless IO-Link master SensControl
Wireless IO-Link Master

Article no.: 11214576
  • On-site configuration and monitoring of IO-Link devices (sensors/actuators)
  • Communication via WLAN, Bluetooth LE and IO-Link
  • Power supply by integrated rechargeable battery
  • Increased mobility and easy to use via SensControl app
Mounting accessories
HI11-1H
Mounting for sensors in hygienic design Ø 11 mm

Article no.: 11039552
  • Material: Stainless steel V4A
  • EHEDG-certified
Connectors and mating connectors
ESG 32AY0200
Connector M8, 4 pin, straight, 2 m, V4A-PP

Article no.: 11166415

  • Connecting cable for Connector type M8
  • 2 m
  • Unshielded
  • Food & Beverage
ESG 32AY0500
Connector M8, 4 pin, straight, 5 m, V4A-PP

Article no.: 11166419

  • Connecting cable for Connector type M8
  • 5 m
  • Unshielded
  • Food & Beverage
ESG 32AY1000
Connector M8, 4 pin, straight, 10 m, V4A-PP

Article no.: 11166440

  • Connecting cable for Connector type M8
  • 10 m
  • Unshielded
  • Food & Beverage
ESW 31AY0200
Connector M8, 4 pin, angular, 2 m, V4A-PP

Article no.: 11166441

  • Connecting cable for Connector type M8
  • 2 m
  • Unshielded
  • Food & Beverage
ESW 31AY0500
Connector M8, 4 pin, angular, 5 m, V4A-PP

Article no.: 11166442

  • Connecting cable for Connector type M8
  • 5 m
  • Unshielded
  • Food & Beverage
ESW 31AY1000
Connector M8, 4 pin, angular, 10 m, V4A-PP

Article no.: 11166443

  • Connecting cable for Connector type M8
  • 10 m
  • Unshielded
  • Food & Beverage
To the top