2. Panoramica dei prodotti
  3. Encoder / sensori angolari
  4. Encoder assoluti industirali
  5. 58 mm compatto
  6. EAL580-SC
  7. EAL580-SC - EtherNet/IP
Dati tecnici
Dati tecnici - Valori elettrici
Tensione operativa
  • 10...30 VDC
Reverse polarity protection
  • Yes
Corrente operativa senza carico
  • ≤100 mA (24 VDC)
Interface
  • EtherNet/IP
Function
  • Multiturn
Steps per revolution
  • ≤262144 / 18 bit (adjustable)
Number of revolutions
  • ≤65536 / 16 bit (adjustable)
Total resolution
  • ≤ 31 bit
Absolute accuracy
  • ±0,01 ° (ST 18 bit / MT 13 bit)
  • ±0,025 ° (ST 13 bit / MT 16 bit)
Principio di scansione
  • Ottico
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-4
Status indicator
  • 4x LED integrated in housing
Approvazione
  • UL approval / E63076
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø58 mm
Tipo di albero
  • ø10 x 20 mm, solid shaft with flat
Flangia
  • Clamping flange
Classe di protezione EN 60529
  • IP 54
  • IP 65
  • IP 67
Velocità operativa
  • ≤10000 giri/min (meccanico)
  • ≤6000 rpm (electric)
Starting acceleration
  • ≤1000 U/s²
Coppia di spunto
  • ≤0,03 Nm (+25 °C, IP 65/IP 67)
  • ≤0,015 Nm (+25 °C, IP 54)
Rotore momento d‘inerzia
  • 20 gcm²
Carico dell‘albero massimo ammesso
  • ≤20 N assiale
  • ≤40 N radiale
Materiale
  • Housing: zinc diecast
  • Flange: aluminium
Temperatura operativa
  • -40...+85 °C (see general informations)
Relative humidity
  • 95 % non-condensing
Resistenza
  • EN 60068-2-6
  • Vibrazione ±0,75 mm - 10-58 Hz 10 g - 58-2000 Hz
  • EN 60068-2-27
  • Urti 100 g, 2 ms
Peso ca.
  • 500 g
Allacciamento
  • Flange connector 3 x M12
Scaricare
Data sheet
Quickstart
Software Manual
Certificates / approvals
Brochures / Catalogs
Declaration of conformity
Software
3D CAD / CAE

Disegni
Drawings
The selected altAttribute does not exist!

(png | 146 KB)
Accessori
Accessori di montaggio
Mounting solid shaft encoders – Eccentric fixing, single (Z 119.006) Eccentric fixing, single (Z 119.006)

Articolo n..: 10117669
  • For encoders with suitable groove
Self-tapping grounding screw (Z 119.100) Self-tapping grounding screw (Z 119.100)

Articolo n..: 11177167
  • Self-tapping grounding screw
The selected altAttribute does not exist! Spring washer coupling (D1=6 / D2=10)
For encoder with solid shaft

Articolo n..: 10141132
  • Backlash-free and angle-synchronous transmission of rotary movements
  • Plug-in version
  • Electric isolated
  • Suitable for very high speeds
  • Good compensation of all misalignments
The selected altAttribute does not exist! Spring washer coupling (D1=10 / D2=10)
For encoder with solid shaft

Articolo n..: 10141133
  • Backlash-free and angle-synchronous transmission of rotary movements
  • Plug-in version
  • Electric isolated
  • Suitable for very high speeds
  • Good compensation of all misalignments
Connettori e cavi
Cables / connectors – Cable connector M12, 4-pin, on both sides, D-coded, 5 m cable (Z 185.E05) – Cable connector M12, 4-pin, on both sides, D-coded, 1 m cable (Z 185.E01) – Cable connector M12, 4-pin, on both sides, D-coded, 2 m cable (Z 185.E02) – Cable connector M12, 4-pin, on both sides, D-coded, 10 m cable (Z 185.E10) Cable connector M12, 4-pin, on both sides, D-coded, 5 m cable (Z 185.E05)

Articolo n..: 11034355
  • Cable connector M12, 4-pin, for EtherNet encoder
  • With shielded cable
  • Cable for flexible cable carriers
  • Protection IP 67
Cables / connectors – Cable connector M12, 4-pin, straight, D-coded, without cable (Z 185.S01) Cable connector M12, 4-pin, straight, D-coded, without cable (Z 185.S01)

Articolo n..: 11174046
  • For cable diameter 4...8 mm
  • Ready-made connector
Cables / connectors – Cable connector M12, 4-pin, angled, D-coded, without cable (Z 185.S02) Cable connector M12, 4-pin, angled, D-coded, without cable (Z 185.S02)

Articolo n..: 11174047
  • For cable diameter 4...8 mm
  • Ready-made connector
Cables / connectors – Female connector M12, 5-pin, A-coded, 5 m cable (Z 185.P05) – Female connector M12, 5-pin, A-coded, 10 m cable (Z 185.P10) Female connector M12, 5-pin, A-coded, 5 m cable (Z 185.P05)

Articolo n..: 11034356
  • Female connector M12 with screwable nut
  • With cable (shielded) in different lengths
Cables / connectors – Female connector M12, 5-pin, A-coded, 5 m cable (Z 185.P05) – Female connector M12, 5-pin, A-coded, 10 m cable (Z 185.P10) Female connector M12, 5-pin, A-coded, 10 m cable (Z 185.P10)

Articolo n..: 11212237
  • Female connector M12 with screwable nut
  • With cable (shielded) in different lengths
In alto