2. Panoramica dei prodotti
  3. Encoder / sensori angolari
  4. Encoder incrementale HeavyDuty
  5. HOG9 / POG9
  6. HOG 9 G
Dati tecnici
Dati tecnici - Valori elettrici
Tensione operativa
  • 5 VDC ±5 %
  • 9...30 VDC
Corrente operativa senza carico
  • ≤100 mA
Impulsi per giro
  • 300 … 5000
Sfasamento
  • 90 ° ±20°
Rapporto ciclico
  • 40…60 %
Segnale di riferimento
  • Impulso zero, ampiezza 90°
Frequenza di uscita
  • ≤120 kHz
  • ≤300 kHz (on request)
Segnale di uscita
  • K1, K2, K0 + invertito
  • Error output (option EMS)
Livelli di uscita
  • HTL-P (power linedriver)
  • TTL/RS422
Principio di scansione
  • Ottico
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-3
Approvazione
  • CE
  • UL approval / E217823
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø97 mm
Tipo di albero
  • ø16 mm (blind hollow shaft)
  • ø17 mm (cone shaft 1:10)
Carico dell‘albero massimo ammesso
  • ≤400 N assiale
  • ≤500 N radiale
Classe di protezione EN 60529
  • IP 56
Velocità operativa
  • ≤10000 giri/min (meccanico)
Tip. coppia operativa
  • 6 Ncm
Rotore momento d‘inerzia
  • 160 gcm²
Materiale
  • Alloggiamento: lega pressofusa di alluminio
  • Albero: acciaio inox
Temperatura operativa
  • -30...+100 °C
  • -25...+100 °C (>3072 pulses)
Resistenza
  • IEC 60068-2-6
  • Vibrazione 15 g, 10-2000 Hz
  • IEC 60068-2-27
  • Urti 275 g, 6 ms
Corrosion protection
  • IEC 60068-2-52 Salt mist
  • for ambient conditions C4 according to ISO 12944-2
Protezione da esplosione
  • II 3 G Ex ec IIC T4 Gc (gas)
  • II 3 D Ex tc IIIB T135°C Dc (dust)
  • (only with option ATEX)
Allacciamento
  • 2x flange connector M23, 12-pin
Peso ca.
  • 1,1 kg
Scaricare
Data sheet
Operating Manual
Declaration of conformity

Accessori
Accessori di montaggio
Torque arm M6, length 67...70 mm

Articolo n..: 11043628
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 67...70 mm
Torque arm M6, length 120...130 mm (≥71 mm)

Articolo n..: 11004078
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
Torque arm M6, length 425...460 mm (≥131 mm)

Articolo n..: 11002915
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
Torque arm M6 insulated, length 67...70 mm

Articolo n..: 11054917
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 67...70 mm
Torque arm M6 insulated, length 120...130 mm (≥71 mm)

Articolo n..: 11072795
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
Torque arm M6 insulated, length 425...460 mm (≥131 mm)

Articolo n..: 11082677
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
Mounting kit for torque arm size M6 and earthing strap

Articolo n..: 11077197

Mounting kit for fixing a torque arm size M6 and an earthing strap.
Mounting and dismounting kit for blind hollow shaft

Articolo n..: 11081744

Mounting and dismounting kit for fixing the incremental encoder HOG 9 (HOG 9 G) version with blind hollow shaft. For fixing the encoder to the drive shaft and for fixing the torque arm to the encoder. Additional for dismounting the encoder of the drive shaft.
Mounting and dismounting kit for cone shaft

Articolo n..: 11084868

Mounting and dismounting kit for fixing the incremental encoder HOG 9 (HOG 9 G) version with cone shaft. For fixing the encoder to the drive shaft and for fixing the torque arm to the encoder. Additional for dismounting the encoder of the drive shaft.
Connettori e cavi
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
Mating connector M23, solder version, 12-pin, CCW

Articolo n..: 11068577

Mating connector M23 in solder version (12-pin, female, CCW) for cable connection to the flange connector M23 (12-pin, male, CW).
In alto