optoPulse EN580E.IL-SU06.GB1T2.01024.K

Articolo n..: 11246010

Size ø58 mm
Precise optical sensing
Output signal level TTL or HTL
Pulses per revolution up to 4096
High connection flexibility due to flexible M12 connector and flylead connector M23

5 pezzi immediatamente disponibili a magazzino

Dati tecnici

mostra tutti

Dati tecnici - Valori elettrici

Tensione operativa

5 VDC ±5 %

Reverse polarity protection

Short-circuit proof

Yes (max. 1 s and 1 signal)

Corrente operativa senza carico

≤70 mA

Impulsi per giro

1024

Sfasamento

90 ° ±10°

Rapporto ciclico

40…60 %

Segnale di riferimento

Zero pulse, width 90° ±10 %

Principio di scansione

Ottico

Frequenza di uscita

≤300 kHz (TTL)

Segnale di uscita

A+, B+, R+, A-, B-, R-

Livelli di uscita

TTL/RS422

Immunità alle interferenze

EN 61000-6-2

Emissione di interferenze

EN 61000-6-4

Approvazione

UL-Listing: E217823

Dati tecnici - progettazione meccanica

Grandezza (flangia)

ø58 mm

Tipo di albero

ø6 x 10 mm, solid shaft with flat

Carico dell‘albero massimo ammesso

≤40 N assiale
≤80 N radiale

Flangia

Synchro flange

Classe di protezione EN 60529

IP 54 (flange side)
IP 65 (housing side)

Velocità operativa

≤6000 rpm (+25 °C)

Coppia di spunto

≤0,02 Nm

Materiale

Housing: aluminium
Albero: acciaio inox

Temperatura operativa

-25...+100 °C (see general information)

Relative humidity

95 % non-condensing

Resistenza

EN 60068-2-6 Vibrazione 30 g, 10-2000 Hz
EN 60068-2-27 Urti 100 g, 11 ms

Allacciamento

Flange connector M23, 12-pin, CCW

Peso ca.

300 g

Scaricare

mostra tutti

Data sheet

Schede tecniche – EN580E.IL-SU06.GB1T2.01024.K
- FR (pdf | 911 KB)
Schede tecniche – EN580E.IL-SU06.GB1T2.01024.K
- DE (pdf | 914 KB)
Schede tecniche – EN580E.IL-SU06.GB1T2.01024.K
- EN (pdf | 911 KB)

Quickstart

EN580E.IL
- DE/EN/FR (pdf | 2 MB)

Certificates / approvals

UL-Listing: E217823
- (pdf | 263 KB)

CAD

EN580E.IL - solid shaft with synchro flange, flange connector M23
- (zip | 386 KB)

Accessori

mostra tutti

Accessori di montaggio

	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Articolo n..: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Articolo n..: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=06 / D2=06) For encoder with solid shaft Articolo n..: 11065916	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Articolo n..: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=6) For encoder with solid shaft Articolo n..: 10141131	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=06 / D2=06) For encoder with solid shaft Articolo n..: 11069333	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft Articolo n..: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Set of eccentric fixings type A Articolo n..: 11065545	With 3 eccentric fixings type A
	Mounting adaptor For encoders with synchro flange Articolo n..: 10117667	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings for mounting clamp (10117667) Articolo n..: 10117668	With 3x eccentric fixings, screws and nuts

Cavi con fili aperti

	Female connector M23, 12-pin, CW, with cable 1 m Articolo n..: 11095302	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 1 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 2 m Articolo n..: 11100408	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 2 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 5 m Articolo n..: 11100430	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 5 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 10 m Articolo n..: 11100431	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 10 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Connector M23 (S2BG12), 1 m cable (incremental) Articolo n..: 11072792	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
	Connector M23 (S2BG12), 2 m cable (incremental) Articolo n..: 11072796	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
	Connector M23 (S2BG12), 5 m cable (incremental) Articolo n..: 11072804	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
	Connector M23 (S2BG12), 10 m cable (incremental) Articolo n..: 11072815	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs

Measuring wheels

	MR241.06D Small measuring wheel Articolo n..: 11033278	Circumference 20 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø6 mm
	MR261.06A Small measuring wheel Articolo n..: 11033288	Circumference 20 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø6 mm