optoPulse ExEIL580-SY

Dati tecnici

mostra tutti

Dati tecnici - Valori elettrici

Tensione operativa

5 VDC ±5 %
8...30 VDC
4.75...30 VDC

Reverse polarity protection

Short-circuit proof

Yes (HTL)
Yes (TTL, max. 1 s and 1 signal)

Corrente operativa senza carico

≤70 mA

Impulsi per giro

100 … 5000

Sfasamento

90 ° ±10°

Rapporto ciclico

40…60 %

Segnale di riferimento

Zero pulse, width 90° ±10 %

Principio di scansione

Ottico

Frequenza di uscita

≤300 kHz (TTL)
≤160 kHz (HTL)

Segnale di uscita

A+, B+, R+, A-, B-, R-

Livelli di uscita

TTL/RS422
HTL/push-pull

Immunità alle interferenze

EN 61000-6-2

Emissione di interferenze

EN 61000-6-3

Dati tecnici - progettazione meccanica

Grandezza (flangia)

ø58 mm

Tipo di albero

ø6 x 10 mm, solid shaft with flat

Carico dell‘albero massimo ammesso

≤40 N assiale
≤80 N radiale

Flangia

Synchro flange

Classe di protezione EN 60529

IP 65

Velocità operativa

≤12000 rpm (+20 °C)
≤11000 rpm (+40 °C)
≤8000 rpm (+60 °C)

Coppia di spunto

≤0,015 Nm (+20 °C)

Materiale

Alloggiamento: lega pressofusa di alluminio
Flange: aluminium
Albero: acciaio inox

Ambient temperature

-20...+60 °C

Relative humidity

90 % non-condensing

Resistenza

EN 60068-2-6
Vibrazione 30 g, 10-2000 Hz
EN 60068-2-27
Urti 300 g, 6 ms

Protezione da esplosione

II 3 D Ex tc IIIC T135°C Dc X (dust): see special conditions “X”

Allacciamento

Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cavo

Peso ca.

300 g

Scaricare

mostra tutti

Data sheet

Schede tecniche – ExEIL580-SY
- FR (pdf | 2 MB)
Schede tecniche – ExEIL580-SY
- DE (pdf | 2 MB)
Schede tecniche – ExEIL580-SY
- EN (pdf | 2 MB)
Schede tecniche – ExEIL580-SY
- ZH (pdf | 2 MB)

Quickstart

ExEIL580
- DE/EN (pdf | 1 MB)

Brochures / Catalogs

Declaration of conformity

DoC / CoC - ExEIL580
- DE/EN/FR/BG/CZ/DK/ES/FI/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SI/SK (pdf | 488 KB)

CAD

EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable axial, IP65 / STEP (EIL580-SY06.5Tx.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable radial, IP65 / STEP (EIL580-SY06.5Rx.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable tangential, IP65 / STEP (EIL580-SY06.5Px.xxxxx.A)
- STEP (zip | 921 KB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M12 axial, IP65 / STEP (EIL580-SY06.5Ax.xxxxx.A)
- STEP (zip | 951 KB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M12 radial, IP65 / STEP (EIL580-SY06.5Bx.xxxxx.A)
- STEP (zip | 955 KB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M23 axial, IP65 / STEP (EIL580-SY06.5Dx.xxxxx.A)
- STEP (zip | 495 KB)
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M23 radial, IP65 / STEP (EIL580-SY06.5Fx.xxxxx.A)
- STEP (zip | 1 MB)

Accessori

mostra tutti

Accessori di montaggio

	Coupling CPS25 (L=19, D1=06 / D2=06) For encoder with solid shaft Articolo n..: 11065916	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=06 / D2=08) For encoder with solid shaft Articolo n..: 11065917	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Articolo n..: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=11 / D2=06) For encoder with solid shaft Articolo n..: 11065926	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=12 / D2=06) For encoder with solid shaft Articolo n..: 11065928	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=6) For encoder with solid shaft Articolo n..: 10141131	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Articolo n..: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=16) For encoder with solid shaft Articolo n..: 11034139	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Articolo n..: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Mounting adaptor For encoders with synchro flange Articolo n..: 10117667	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings for mounting clamp (10117667) Articolo n..: 10117668	With 3x eccentric fixings, screws and nuts
	Set of eccentric fixings type A Articolo n..: 11065545	With 3 eccentric fixings type A
	Bearing flange for encoders with synchro flange (Z 119.035) Articolo n..: 10158124	For all encoder with synchro flange and 6 mm shaft Material: Aluminium, bare