2. Panoramica dei prodotti
  3. Encoder / sensori angolari
  4. Risolutori / Generatori di impulsi HeavyDuty
  5. EEx GP0,2
  6. TG 74 d
Dati tecnici
Dati tecnici - Valori elettrici
Reversal tolerance
  • ≤0,1 %
Linearity tolerance
  • ≤0,15 %
Temperature coefficient
  • ± 0,06 %/K (open-circuit)
Isolation class
  • B
Calibration tolerance
  • ±5 %
Climatic test
  • Humid heat, constant (IEC 60068-2-3, Ca)
Performance
  • 12 W (speed ≥5000 rpm)
Armature-circuit time-constant
  • <150 µs
Voltage
  • 20…150 mV per rpm
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-3
Approvazione
  • CE
  • ATEX
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø115 mm
Tipo di albero
  • ø14 mm solid shaft
Flangia
  • EURO-flangia B10
Classe di protezione EN 60529
  • IP 54 (T6)
Torque
  • 1,5 Ncm
Rotore momento d‘inerzia
  • 1,15 kgcm²
Carico dell‘albero massimo ammesso
  • ≤60 N assiale
  • ≤80 N radiale
Materiale
  • Aluminium die cast alloy
  • Albero: acciaio inox
Ambient temperature
  • -20...+55 °C
Resistenza
  • IEC 60068-2-6
  • Vibrazione 10 g, 10-2000 Hz
  • IEC 60068-2-27
  • Urti 300 g, 6 ms
Corrosion protection
  • IEC 60068-2-52 Salt mist
  • for ambient conditions C4 according to ISO 12944-2
Protezione da esplosione
  • II 2 G Ex db eb IIC T6 Gb (gas)
Peso ca.
  • 3,8 kg
Allacciamento
  • Screw terminal connector
Scaricare
Data sheet
Operating Manual
Certificates / approvals
Declaration of conformity

Accessori
Accessori di montaggio
Spring disk coupling K 35 (shaft ø6...12 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
Spring disk coupling K 50 (shaft ø11...16 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
The selected altAttribute does not exist! Spring disk coupling K60 WD 11PF4 + 12PF4
For encoder with solid shaft

Articolo n..: 11064874
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Additional key possible
In alto