2. Panoramica dei prodotti
  3. Misurazione delle distanze
  4. Sensori di distanza a ultrasuoni
  5. Grandi raggi d’azione
  6. UNAM 50U6121
Dati tecnici
Dati generali
Scanning range Sd
  • 400 … 2500 mm
Scanning range close limit Sdc
  • 400 … 2500 mm
Scanning range far limit Sde
  • 400 … 2500 mm
Repeat accuracy
  • 1 mm
Resolution
  • < 0,3 mm
Response time ton
  • < 160 ms
Release time toff
  • < 160 ms
Temperature drift
  • > 50 mm < 2 % of distance to target Sde
Sonic frequency
  • 120 kHz
Adjustment
  • Teach-in
Alignment aid
  • Target indication flashing
Light indicator
  • Yellow LED / red LED
Dati elettrici
Tensione di alimentazione +Vs
  • 15 … 30 VDC
Corrente assorbita max. (senza carico)
  • 35 mA
Circuito di uscita
  • Voltage output
Output signal
  • 0 ... 10 V / 10 ... 0 V
Output current
  • 20 mA
Residual ripple
  • < 10 % Vs
Protezione da cortocircuito
  • Si
Protezione dall'inversione di polarità
  • Si
Dati meccanici
Design
  • Cylindrical threaded
Housing material
  • Brass nickel plated
Width / diameter
  • 30 mm
Height / length
  • 95 mm
Connection types
  • Cable, L=2 m
Condizioni ambientali
Temperatura d'esercizio
  • -10 … +60 °C
Tipo di protezione
  • IP 67
Scaricare
Data sheet
Quickstart
Certificates / approvals
CAD
EPLAN

Diagrammi
Typical sonic cone profile

(png | 190 KB)
Disegni
Drawings

(png | 45 KB)
Connection diagram

(png | 515 KB)
Accessori
Peripherals
ZTEST-ALL.ANALOG
Test unit for sensors analog & digital

Articolo n..: 11084376
  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
ZUSDF-M30
Sonic beam deflector series 30 rectangular

Articolo n..: 11200599
  • Sonic beam deflector for ultrasonic sensors
  • Sonic beam deflector for radar sensors
Mounting accessories
11200030
Sensofix series 30

Articolo n..: 11200030
  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel
ZADAP-M30.STANDARD
Mounting bracket series 30

Articolo n..: 11199998
  • Material: Steel galvanized
The selected altAttribute does not exist! ZADAP-M30.LONG
Mounting bracket long series 30 (L design)

Articolo n..: 11199999
  • Material: Steel galvanized
The selected altAttribute does not exist! Mounting rod with mounting plate holder 200 mm

Articolo n..: 11707685
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod with mounting plate holder 300 mm

Articolo n..: 11707686
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod 200 mm

Articolo n..: 11707688
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod 250 mm

Articolo n..: 11707697
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod with mounting plate holder 250 mm

Articolo n..: 11707698
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod 300 mm

Articolo n..: 11707687
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting plate ø30 mm

Articolo n..: 11707700
  • Material: Steel
  • Part of an assembly
The selected altAttribute does not exist! Mounting base

Articolo n..: 11707702
  • Material: Plastic (PA)
  • Part of an assembly
The selected altAttribute does not exist! Two-way connector

Articolo n..: 11707703
  • Material: Plastic (PA)
  • Part of an assembly
In alto