EExHOG 161 | Inkrementale Drehgeber | Baumer Deutschland

Drehgeber Inkremental / ATEX
Optisches Abtastprinzip
ATEX II 2 G Ex db eb IIC T6 Gb
IECEx Ex db eb IIC T6 Gb
Durchgehende Hohlwelle ø30...70 mm
Robustes Leichtmetall-Gehäuse
Ausgangsstufe HTL oder TTL
Ausgangsstufe TTL mit Regler UB 9...26 VDC
Grosser, um 180° drehbarer Klemmenkasten
Optional: Kabelverschraubung M20x1,5

Verfügbarkeit auf Anfrage

Technische Daten

alle anzeigen

Technische Daten - elektrisch

Betriebsspannung

9...30 VDC
5 VDC ±5 %
9...26 VDC

Betriebsstrom ohne Last

≤100 mA

Impulse pro Umdrehung

250 … 2500

Phasenverschiebung

90 ° ±20°

Tastverhältnis

40…60 %

Referenzsignal

Nullimpuls, Breite 90°

Abtastprinzip

Optisch

Ausgabefrequenz

≤120 kHz

Ausgangssignale

K1, K2, K0 + invertierte

Ausgangsstufen

HTL
TTL/RS422

Störfestigkeit

EN 61000-6-2

Störaussendung

EN 61000-6-3

Zulassung

CE
ATEX
IECEx

Technische Daten - mechanisch

Baugrösse (Flansch)

ø160 mm

Wellenart

ø30...70 mm (durchgehende Hohlwelle)

Zulässige Wellenbelastung

≤450 N axial
≤650 N radial

Schutzart EN 60529

IP 54
IP 56

Betriebsdrehzahl

≤5600 U/min (mechanisch)

Betriebsdrehmoment typ.

60 Ncm

Trägheitsmoment Rotor

31,9 kgcm² (ø40)
11,3 kgcm² (ø70)

Werkstoff

Gehäuse: Aluminiumlegierung
Welle: Edelstahl

Umgebungstemperatur

-20...+58 °C (IP 56)
-20...+66 °C (IP 54)

Widerstandsfähigkeit

IEC 60068-2-6
Vibration 10 g, 50-2000 Hz
IEC 60068-2-27
Schock 100 g, 6 ms

Korrosionsschutz

IEC 60068-2-52 Salzsprühnebel
für Umgebungsbedingungen C4 nach ISO 12944-2

Explosionsschutz

II 2 G Ex db eb IIC T6 Gb
Ex db eb IIC T6 Gb

Anschluss

Klemmenkasten

Masse ca.

8,8 kg (ø40)
6,2 kg (ø70)

Downloads

show all

Data sheet

Data sheet – EExHOG 161
- FR (pdf | 1 MB)
Data sheet – EExHOG 161
- DE (pdf | 1 MB)
Data sheet – EExHOG 161
- EN (pdf | 1 MB)

Operating Manual

EExHOG 161
- DE/EN (pdf | 2 MB)

Certificates / approvals

EExHOG 161 EU-Type Examination Certificate
- DE (pdf | 563 KB)
EExHOG 161 IECEx certificate
- EN (pdf | 760 KB)

Declaration of conformity

DoC / CoC - EExHOG161, EExOG9, EExOG9S
- BG/CZ/DE/DK/EN/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SI/SK (pdf | 293 KB)

Accessories

show all

Mounting accessories

	Torque arm M6, length 67...70 mm Article no.: 11043628	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 67...70 mm
	Torque arm M6, length 120...130 mm (≥71 mm) Article no.: 11004078	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 120...130 mm Can be shortened to ≥71 mm
	Torque arm M6, length 425...460 mm (≥131 mm) Article no.: 11002915	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 425...460 mm Can be shortened to ≥131 mm
	Torque arm M6 insulated, length 67...70 mm Article no.: 11054917	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 67...70 mm
	Torque arm M6 insulated, length 120...130 mm (≥71 mm) Article no.: 11072795	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 120...130 mm Can be shortened to ≥71 mm
	Torque arm M6 insulated, length 425...460 mm (≥131 mm) Article no.: 11082677	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 425...460 mm Can be shortened to ≥131 mm

Connectors and cables

	Extension cable gland M16 to M20 Article no.: 11106863	Extension for the M16x1.5 cable gland to a M20x1.5 cable gland, extension part and cable gland M20x1,5 included. Permissible cable diameter 9-14 mm.
	Sensor cable for encoders HEK 8	The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.

Diagnostic accessories

	Analyzer for encoders HENQ 1100 Article no.: 11075858	Analyzer for encoders Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.) Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding) Individual error messages Windows applications software for the PC, for graphical display and statistical evaluation of the measurements Recording of measurements and error messages
	Analyzer for encoders HENQ 1100 B with integrated battery Article no.: 11075880	Analyzer for encoders Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.) Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding) Individual error messages Windows applications software for the PC, for graphical display and statistical evaluation of the measurements Recording of measurements and error messages