Technische Daten
Technische Daten - elektrisch
Betriebsspannung
  • 5 VDC ±10 %
  • 9...30 VDC
Betriebsstrom ohne Last
  • ≤90 mA
Sinusperioden pro Umdrehung
  • 720 … 5000
Phasenverschiebung
  • 90 °
Referenzsignal
  • Nullimpuls, Breite 90°
Abtastprinzip
  • Optisch
Ausgangssignale
  • K1, K2, K0 + invertierte
Ausgangsstufen
  • SinCos 1 Vss
Differenz der SinCos-Amplitude
  • ≤20 mV
Oberwellen typ.
  • -50 dB
Überlagerter Gleichanteil
  • ≤20 mV
Bandbreite
  • 250 kHz (-3 dB)
Störfestigkeit
  • EN 61000-6-2
Störaussendung
  • EN 61000-6-3
Zulassung
  • CE
  • UL-Zulassung / E217823
Technische Daten - mechanisch
Baugrösse (Flansch)
  • ø115 mm
Wellenart
  • ø11 mm Vollwelle
Zulässige Wellenbelastung
  • ≤250 N axial
  • ≤350 N radial
Flansch
  • EURO-Flansch B10
Schutzart EN 60529
  • IP 66
Betriebsdrehzahl
  • ≤10000 U/min (mechanisch)
Betriebsdrehmoment typ.
  • 2 Ncm
Trägheitsmoment Rotor
  • 320 gcm²
Werkstoff
  • Gehäuse: Aluminium-Druckgusslegierung und Edelstahl
  • Welle: Edelstahl
Betriebstemperatur
  • -20...+85 °C
Widerstandsfähigkeit
  • IEC 60068-2-6
  • Vibration 10 g, 10-2000 Hz
  • IEC 60068-2-27
  • Schock 100 g, 11 ms
Korrosionsschutz
  • IEC 60068-2-52 Salzsprühnebel
  • für Umgebungsbedingungen C4 nach ISO 12944-2
Explosionsschutz
  • II 3 G Ex ec IIC T4 Gc (Gas)
  • II 3 D Ex tc IIIC T135°C Dc (Staub)
  • (nur bei Option ATEX)
Anschluss
  • Klemmenkasten
Masse ca.
  • 1,5 kg

Downloads
Data sheet
Operating Manual
Declaration of conformity

Accessories
Mounting accessories
Spring disk coupling K 35 (shaft ø6...12 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
Spring disk coupling K 50 (shaft ø11...16 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible
Spring disk coupling K 60 (shaft ø11...22 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Additional key possible
Connectors and cables
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.

Diagnostic accessories
Analyzer for encoders HENQ 1100

Article no.: 11075858

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Article no.: 11075880

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages

To the top