Technische Daten
Technische Daten - elektrisch
Betriebsspannung
  • 5 VDC ±5 %
Verpolungsfest
  • Ja
Kurzschlussfest
  • Ja (max. 1 s und 1 Signal)
Betriebsstrom ohne Last
  • ≤70 mA
Impulse pro Umdrehung
  • 4096
Phasenverschiebung
  • 90 ° ±10°
Tastverhältnis
  • 40…60 %
Referenzsignal
  • Nullimpuls, Breite 90° ±10 %
Abtastprinzip
  • Optisch
Ausgabefrequenz
  • ≤300 kHz (TTL)
Ausgangssignale
  • A+, B+, R+, A-, B-, R-
Ausgangsstufen
  • TTL/RS422
Störfestigkeit
  • EN 61000-6-2
Störaussendung
  • EN 61000-6-4
Zulassung
  • UL Class 2
Technische Daten - mechanisch
Baugrösse (Flansch)
  • ø58 mm
Wellenart
  • ø6 x 10 mm, Vollwelle mit Fläche
Zulässige Wellenbelastung
  • ≤40 N axial
  • ≤80 N radial
Flansch
  • Servoflansch
Schutzart EN 60529
  • IP 54 (flanschseitig)
  • IP 65 (gehäuseseitig)
Betriebsdrehzahl
  • ≤6000 U/min (+25 °C)
Anlaufdrehmoment
  • ≤0,02 Nm
Werkstoff
  • Gehäuse: Aluminium
  • Vollwelle: Edelstahl
Betriebstemperatur
  • -25...+100 °C (siehe allgemeine Hinweise)
Relative Luftfeuchte
  • 95 % nicht betauend
Widerstandsfähigkeit
  • EN 60068-2-6 Vibration 30 g, 10-2000 Hz
  • EN 60068-2-27 Schock 100 g, 11 ms
Anschluss
  • Flanschdose M23, 12-polig, CCW
Masse ca.
  • 300 g

Downloads
Datenblatt
Kurzanleitung
3D CAD / CAE

Accessories
Montagezubehör
The selected altAttribute does not exist! Faltenbalg-Kupplung (D1=06 / D2=10)
Für Drehgeber mit Vollwelle

Article no.: 11050507

  • Spielfreie winkelsynchrone Übertragung
  • Optimaler Ausgleich von Fluchtungsfehlern
  • Sehr grosse Drehfedersteife
  • Kleine Rückstellkraft
  • Schwingungsdämpfend
  • Balg aus Edelstahl
The selected altAttribute does not exist! Kupplung CPS25 (L=19, D1=10 / D2=06)
Für Drehgeber mit Vollwelle

Article no.: 11065922

  • Präzisionskupplung
  • Drehsteife Kupplung mit geringer Einbautiefe
  • Steckbar
  • Elektrisch isolierende Mittelscheibe
  • Für sehr hohe Drehzahlen geeignet
The selected altAttribute does not exist! Kupplung CPS25 (L=19, D1=06 / D2=06)
Für Drehgeber mit Vollwelle

Article no.: 11065916

  • Präzisionskupplung
  • Drehsteife Kupplung mit geringer Einbautiefe
  • Steckbar
  • Elektrisch isolierende Mittelscheibe
  • Für sehr hohe Drehzahlen geeignet
The selected altAttribute does not exist! Spring washer coupling (D1=6 / D2=10)
For encoder with solid shaft

Article no.: 10141132

  • Backlash-free and angle-synchronous transmission of rotary movements
  • Plug-in version
  • Electric isolated
  • Suitable for very high speeds
  • Good compensation of all misalignments
The selected altAttribute does not exist! Spring washer coupling (D1=6 / D2=6)
For encoder with solid shaft

Article no.: 10141131

  • Backlash-free and angle-synchronous transmission of rotary movements
  • Plug-in version
  • Electric isolated
  • Suitable for very high speeds
  • Good compensation of all misalignments
The selected altAttribute does not exist! Coupling CPS37 (L=24, D1=06 / D2=06)
For encoder with solid shaft

Article no.: 11069333

  • Precision coupling
  • Torsionally stiff coupling with low installation depth
  • Pluggable
  • Electrically insulating center disk
  • Suitable for very high speeds
The selected altAttribute does not exist! Coupling CPS37 (L=24, D1=10 / D2=06)
For encoder with solid shaft

Article no.: 11069337

  • Precision coupling
  • Torsionally stiff coupling with low installation depth
  • Pluggable
  • Electrically insulating center disk
  • Suitable for very high speeds
Set of eccentric fixings type A

Article no.: 11065545

The selected altAttribute does not exist! Mounting adaptor for encoders with synchro flange

Article no.: 10117667

  • Glass-fiber reinforced plastic
  • excellent resistance against temperature and chemicals
  • Electrically isolated encoder mount
Cables with open-ended wires
optoPulse Female connector M23, 12-pin, CW, with cable 1 m

Article no.: 11095302

  • Connection cable shielded with female connector M23, open cable end
  • Cable [4x2x0.14 mm²], cable length 1 m
  • Cable coating PVC
  • Colour code according to DIN 47100
  • UL/CSA approval
  • Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)).
  • Temperature range -40...+85 °C (fixed installation)
optoPulse Female connector M23, 12-pin, CW, with cable 2 m

Article no.: 11100408

  • Connection cable shielded with female connector M23, open cable end
  • Cable [4x2x0.14 mm²], cable length 2 m
  • Cable coating PVC
  • Colour code according to DIN 47100
  • UL/CSA approval
  • Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)).
  • Temperature range -40...+85 °C (fixed installation)
optoPulse Female connector M23, 12-pin, CW, with cable 5 m

Article no.: 11100430

  • Connection cable shielded with female connector M23, open cable end
  • Cable [4x2x0.14 mm²], cable length 5 m
  • Cable coating PVC
  • Colour code according to DIN 47100
  • UL/CSA approval
  • Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)).
  • Temperature range -40...+85 °C (fixed installation)
optoPulse Female connector M23, 12-pin, CW, with cable 10 m

Article no.: 11100431

  • Connection cable shielded with female connector M23, open cable end
  • Cable [4x2x0.14 mm²], cable length 10 m
  • Cable coating PVC
  • Colour code according to DIN 47100
  • UL/CSA approval
  • Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)).
  • Temperature range -40...+85 °C (fixed installation)
Connector M23 (S2BG12), 1 m cable (incremental)

Article no.: 11072792

  • Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
Connector M23 (S2BG12), 2 m cable (incremental)

Article no.: 11072796

  • Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
Connector M23 (S2BG12), 5 m cable (incremental)

Article no.: 11072804

  • Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
Connector M23 (S2BG12), 10 m cable (incremental)

Article no.: 11072815

  • Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
Measuring wheels
The selected altAttribute does not exist! MR241.06D
Small measuring wheel

Article no.: 11033278

  • Circumference 20 cm
  • Surface profile: Smooth
  • Surface material: Hytrel TPE-E
  • Bore ø6 mm
The selected altAttribute does not exist! MR261.06A
Small measuring wheel

Article no.: 11033288

  • Circumference 20 cm
  • Surface profile: Knopped rubber
  • Surface material: Nitrile NBR
  • Bore ø6 mm

To the top