Technical data
Performance characteristics conductivity
- Conductivity
- 14 selectable ranges
- Min. measurable conductivity
- 50 µS/cm
- Max. measuring span
- 1000 mS/cm
- Min. measuring span
- 500 µS/cm
- Max. measuring error
- ± 1.0 % FSR , 0 … 1 mS/cm to 0 … 500 mS/cm
- ± 1.5 % FSR , 0 … 1000 mS/cm
- ± 1.5 % FSR , 0 … 500 µS/cm
- Reference temperature
- 25 °C , adjustable
- Repeatability
- < 0.5 % FSR , > 1 mS/cm
- Compensated temperature range
- -20 … 150 °C
- Temperature compensation
- 0.0 … 5.0 % FSR/K , adjustable
- Step response time, T90
- ≤ 2.0 s
- Sample time
- ≤ 0.4 s
Performance characteristics concentration
- Concentration
- Programmable with IO-Link and FlexProgram
- Factory set media (available from FlexProgram)
- 0 … 25 % by weight , HNO3 (nitric acid)
- 36 … 82 % by weight , HNO3 (nitric acid)
- 0 12 % by weight , NaOH (caustic soda)
- 25 50 % by weight , NaOH (caustic soda)
- Customer defined media
- Customer defined (30 point lookup table)
Performance characteristics temperature
- Temperature
- Free programmable range
- Measuring range
- -20 … 150 °C
- Thermal response time, T90
- ≤ 15 s
- Max. measuring error
- ± 1.5 K
- 0.3 K , 20 … 50 °C
Process conditions
- Process temperature
- -20 … 140 °C , permanent
- 140 … 150 °C , max. t < 1 h
- Process pressure
- ≤ 25 bar
Process connection
- Connection variants
- G 1 A hygienic
- Wetted parts material
- PEEK Natura
- Surface roughness wetted parts
- Ra ≤ 0.8 µm
HART® interface
- Properties
- Universal commands
- Common-practice commands
- Conductivity device family commands
- Device Specific Commands
- For more information please see ‚HART Field Device Specification‘
- Protocol
- HCF standard, Rev.7
IO-Link interface
- IO-Link version
- 1.1
- Device profile
- Smart Sensor Profile
- Baud rate
- 38,4 kbaud (COM2)
- Cycle time
- ≥ 8.4 ms
- Process data length
- 128 bit
- SIO-mode
- Yes
- Process data (cyclic)
- Switch state
- Signal analog output 1
- Signal analog output 2
- Temperature
- Unit temperature
- Conductivity
- Concentration
- Actual measuring range
Ambient conditions
- Degree of protection (EN 60529)
- IP67
- IP69K , with appropriate cable
Compliance and approvals
- EMC
- EN 61326-1
- Hygiene
- 3-A (74-07)
- EHEDG EL Class I
- FDA (21 CFR 177.2415)
- Safety
- cULus listed, E491206
Software
Software
-
Software – Firmware update (Hardware version ≥ 10)
-
Software – Firmware update (Hardware version ≤ 9)
-
Software – PC Software FlexProgram
-
Software – DDL (Firmware ≤ 7)
-
Software – DDL (Firmware ≥ 8)
-
Software – FlexProgram HART configuration package
-
Software – CombiLyz AFIx - DeviceID - 1009 - IODD
-
Software – CombiLyz AFIx - DeviceID - 1007 - (< 01.02.2023) - IODD
-
Baumer Sensor Suite
Downloads
Data sheet
-
Data sheet – AFI4 (2 x 4...20 mA)
-
Data sheet – AFI4 (2 x 4...20 mA)
-
Data sheet – AFI4 (2 x 4...20 mA)
-
Data sheet – AFI4 (2 x 4...20 mA, HART)
-
Data sheet – AFI4 (2 x 4...20 mA, HART)
-
Data sheet – AFI4 (2 x 4...20 mA, HART)
-
Data sheet – AFI4 (2 x 4...20 mA, IO-Link)
-
Data sheet – AFI4 (2 x 4...20 mA, IO-Link)
-
Data sheet – AFI4 (2 x 4...20 mA, IO-Link)
Quickstart
-
Quick Reference Guide
Operating Manual
-
Operating instructions – CombiLyz AFIx
Software Manual
-
Operating instructions – HART Field Device Specification (Firmware ≤ 7)
-
Operating instructions – HART Field Device Specification (Firmware ≥ 8)
-
Operating instructions – Parameter and Processdata IODD AFIx DeviceID 1009
-
Operating instructions – Parameter and Processdata IODD AFIx DeviceID 1007 (< 01.02.2023)
Certificates / approvals
-
Declaration of Conformity – CE
-
Declaration of Conformity – Chinese Food Safety
-
Food Regulatory Declaration of Conformity – AFI4, AFI5
-
Type Examination Certificate / Type approval – cULus
-
Type Examination Certificate / Type approval – 3-A
-
Type Examination Certificate / Type approval – EHEDG
-
Type Examination Certificate / Type approval – IEC 61010
-
Type Examination Certificate / Type approval – MTTF
-
China RoHS declaration
Brochures / Catalogs
-
Flyer – Conductivity CombiLyz®
Technical Reports / White Paper
-
Technical Report – Mastering thermal stress CombiLyz
-
Baumer Guideline for Analog Sensor Interfaces
-
Baumer Guideline for Switching Outputs
-
Baumer Term Definitions of Sensor Properties
CAD
-
CAD-Drawing – AFI4
-
AFI4-5630.####.#1##
-
AFI4-5630.####.#2##
-
AFI4-5630.####.#3##
-
AFI4-5730.####.#1##
-
AFI4-5730.####.#3##
-
AFI4-5810.####.#1##
-
AFI4-5810.####.#2##
-
AFI4-6630.####.#1##
-
AFI4-6730.####.#1##
-
AFI4-6730.####.#2##
-
AFI4-6730.####.#3##
-
AFI4-6830.####.#1##
-
AFI4-6830.####.#3##
