Germany
de
English
Picture similar
Technical data
Performance characteristics
- Measuring range
- -1 … 40 bar
- Min. measuring span
- 0.4 bar
- Max. measuring span
- 40 bar
- Pressure type
- Absolute
- Relative (gauged)
- Standard error of measurement (BFSL)
- ± 0.04 % FSR
- ± 0.1 % FSR
- Including non-linearity, hysteresis and non-repeatability according BFSL
- For turndown, multiply this value by the applied turndown ratio
- Max. measuring error
- ± 0.1 % FSR
- ± 0.25 % FSR
- Including zero-point and span error, nonlinearity (by terminal base line), hysteresis and non-repeatability (EN 61298-2)
- For turndown, multiply this value by the applied turndown ratio
- Temperature coefficient
- ≤ 0.03 % FSR/10 K , measuring span
- ≤ 0.03 % FSR/10 K , zero point
- Compensated temperature range
- -10 … 85 °C
- Long term stability
- ≤ 0.1 % FSR/a , measuring range > 1 bar
- ≤ 1 mbar , measuring range ≤ 1 bar
- Max. turndown ratio
- 5 : 1
- Rise time (10 ... 90 %)
- ≤ 5 ms
Software
Software
-
Software – PBMx-M1 IODD1.1
-
Software – PC Software FlexProgram
Downloads
Data sheet
-
Data sheet – PBMH autoclavable
-
Data sheet – PBMH autoclavable
-
Data sheet – PBMH autoclavable
Operating Manual
-
Installation instructions – PBMH autoclavable
-
Operation manual - PBMx-M1 - IO-Link
Certificates / approvals
-
Food Regulatory Declaration of Harmlessness – PBMH
-
Type Examination Certificate / Type approval – EHEDG
-
Type Examination Certificate / Type approval – 3-A
Technical Reports / White Paper
-
Baumer Guideline for Analog Sensor Interfaces
-
Baumer Term Definitions of Sensor Properties
Drawings
Drawings
DIN 11864-3-A (Aseptic Clamp), DN25, Ø 50.5, female thread, membrane Ø 25 mm (BCID: H51)
(png | 16 KB)