The selected altAttribute does not exist!

Small – robust – precise

EB360 Series

  • Absolute positioning single- and multiturn
  • Installation depth 22 mm
  • CANopen, SAE J1939 & SSI interface
  • Protection class beyond IP 69K
  • Designed for outdoor use
Open in product selector
The selected altAttribute does not exist!

Miniature

MDFM / MDRM

  • Absolute position detection up to 360°
  • Analog interface
  • Factory automation
  • Protection class up to IP67
Open in product selector
Hollow shafts up to 8 mm – axial sensing – Absolute encoders EAM500 with only 10 mm installation depth

Flat & redundant

EAM500R

  • Absolute position monitoring up to 360°
  • Installation depth 10 mm
  • CANopen & analog
  • Redundant variants
  • Up to IP69K
  • Corrosion protection CX (C5-M)
Open in product selector
58 mm – bearingless kit

Communicative

MAGRES EAM360-K & EAM580-K

  • Absolute multiturn encoder Dimensions (flange) ø36 mm or ø58 mm
  • For shaft diameters from 6 to 12 mm (axial sensing)
  • Analog interface, CANopen, PROFINET, SAE J1939, SSI, EtherCAT, EtherNet/IP
  • Protection class up to IP69K
  • Additional incremental output
  • Angular accuracy up to ±0.15°
Open in product selector

Your benefits
  • Compact machine design
    • On-Axis encoders operate on axial sensing, which makes them ideal for applications where space around the shaft is limited
  • Reliable long-term operation even under extreme conditions
    • Robust magnetic sensing fully free from wear
    • Resistant to dirt, vibration and shock
    • Immune to bearing loads
  • Immune to shaft currents
    • Particularly in rotary encoders installed at powerful electric drives, ball bearings may be damaged by shaft currents
    • The sensor head being decoupled from shaft will solve the problem
  • Long-term high IP protection
    • The bearingless design allows for high and yet cost-efficient IP protection
    • Even at high speed the encoder is protected against water and dust ingress
    • Improved robustness by electronics being decoupled from moving parts
  • Designed for mobile automation
    • High EMC robustness thanks to E1-compliant design
    • Wire cross-section of 0.5 mm2 for optional pre-assembly of automotive connectors (DEUTSCH, etc.)
       

Applications

Technological highlights

Magnetic sensing requires no bearings between sensor head and material measure (here a center magnet). This way they can be positioned separated from each other. This allows for rather high mounting tolerances and increased flexibility in design and mounting. As there is no need for bearings, there is no conventional wear and tear either. This way the encoders are immune to dust, dirt, textile fibers, shaft currents or bearing loads and robust against vibration and shock.


Downloads

To the top