optoPulse ExEIL580P-B

Size ø58 mm
Precise optical sensing (interpolated)
Output signal level programmable (TTL or HTL)
Blind hollow shaft, ø8…15 mm
Connection axial, radial or tangential
Pulses per revolution 1...65536, programmable
High resistance to shock and vibrations
Option 0122, Explosion protection zone 22

disponibles sur demande

Caractéristiques techniques

montrer tous

Caractéristiques électriques

Alimentation

4,75...30 VDC

Protection contre l'inversion de polarité

Protection court-circuit

Courant de service à vide

≤70 mA

Temps d'initialisation

≤ 30 ms après mise tension

Impulsions par tour

1 … 65536

Période

45…55 % typique à 1024, 2048 impulsions (autre cf. le tableau Période)

Signal de référence

Top zéro 90° ou 180°

Principe de détection

Optique

Fréquence de sortie

≤300 kHz (TTL)
≤160 kHz (HTL)

Signaux de sortie

A+, B+, R+, A-, B-, R-

Etage de sortie

TTL/RS422
HTL/Push-pull

Paramètres programmables

Niveau de sortie TTL/HTL
Nombre d'impulsions 1...65536
Top zéro largeur 90°/180°
Position d'impulsion zéro
Séquence de signaux

Immunité

EN 61000-6-2

Emission

EN 61000-6-3

Caractéristiques mécaniques

Taille (bride)

ø58 mm

Type d’axe

ø8...15 mm (axe creux non traversant)
ø9,52 mm (non traversant)
ø12,7 mm (non traversant)

Protection EN 60529

IP 65

Vitesse de rotation

≤8000 t/min (+20 °C)
≤8000 t/min (+40 °C)
≤5000 t/min (+60 °C)

Couple de démarrage

≤0,02 Nm (+20 °C)

Matière

Boîtier: fonte d'aluminium
Bride: aluminium

Température ambiante

-20...+60 °C

Humidité relative

90 % sans condensation

Résistance

EN 60068-2-6
Vibrations 30 g, 10-2000 Hz
EN 60068-2-27
Choc 250 g, 6 ms

Protection contre les explosions

II 3 D Ex tc IIIC T135°C Dc X (poussière): voir conditions particulières « X »

Raccordement

Embase mâle M12, 8 points
Embase mâle M23, 12 points
Câble

Poids

300 g

Scaricare

show all

Fiche technique

Fiche technique – ExEIL580P-B
- DE (pdf | 3 MB)
Fiche technique – ExEIL580P-B
- EN (pdf | 3 MB)
Fiche technique – ExEIL580P-B
- FR (pdf | 3 MB)

Quickstart

- DE/EN (pdf | 1 MB)

Certificates / approvals

UL certificate E240061
- EN (pdf | 668 KB)

Brochures / Catalogs

EIL580P Programmable
- DE (pdf | 928 KB)
EIL580P Programmable
- EN (pdf | 927 KB)
EIL580P Programmable
- FR (pdf | 929 KB)

Declaration of conformity

DoC / CoC - ExEIL580
- DE/EN/FR (pdf | 291 KB)

Software

Encoder Software v3.3 05.07.16
- Download (zip | 6 MB)

3D CAD / CAE

EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, without stator coupling, IP65 / STEP (EIL580-BN14.5Tx.xxxxx.A)
- STEP (zip | 854 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, stator coupling, IP65 / STEP (EIL580-BT14.5Tx.xxxxx.A)
- STEP (zip | 937 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Tx.xxxxx.A)
- STEP (zip | 859 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, without stator coupling, IP65 / STEP (EIL580-BN14.5Rx.xxxxx.A)
- STEP (zip | 794 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, stator coupling, IP65 / STEP (EIL580-BT14.5Rx.xxxxx.A)
- STEP (zip | 861 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Rx.xxxxx.A)
- STEP (zip | 797 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, without stator coupling, IP65 / STEP (EIL580-BN14.5Px.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, stator coupling, IP65 / STEP (EIL580-BT14.5Px.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Px.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, without stator coupling, IP65 / STEP (EIL580-BN14.5Ax.xxxxx.A)
- STEP (zip | 933 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, stator coupling, IP65 / STEP (EIL580-BT14.5Ax.xxxxx.A)
- STEP (zip | 995 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Ax.xxxxx.A)
- STEP (zip | 925 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, without stator coupling, IP65 / STEP (EIL580-BN14.5Bx.xxxxx.A)
- STEP (zip | 869 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, stator coupling, IP65 / STEP (EIL580-BT14.5Bx.xxxxx.A)
- STEP (zip | 1 MB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Bx.xxxxx.A)
- STEP (zip | 1003 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, without stator coupling, IP65 / STEP (EIL580-BN14.5Dx.xxxxx.A)
- STEP (zip | 536 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, stator coupling, IP65 / STEP (EIL580-BT14.5Dx.xxxxx.A)
- STEP (zip | 606 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Dx.xxxxx.A)
- STEP (zip | 545 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, without stator coupling, IP65 / STEP (EIL580-BN14.5Fx.xxxxx.A)
- STEP (zip | 436 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, stator coupling, IP65 / STEP (EIL580-BT14.5Fx.xxxxx.A)
- STEP (zip | 666 KB)
EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Fx.xxxxx.A)
- STEP (zip | 573 KB)

Disegni

show all

Drawings

Accessori

show all

Accessori di montaggio

	Mounting kit 006 Torque arm, 1-arm, bolt circle ø74…94 mm, mounting M4/M5 Articolo n..: 11066083	For low-dynamic applications and constant movements
	Mounting kit 021 Torque arm, 1-arm, bolt circle ø65.5...281 mm, mounting M4, can be cut to length Articolo n..: 11073119	Universal mounting option by several pitch diameters.
	Mounting kit 028 Torque arm, 1-arm, bolt circle ø74…94 mm, mounting M6 Articolo n..: 11067367	For low-dynamic applications and constant movements
	Mounting kit 046 Stator coupling, 2-armed, bolt circle ø63 mm, mounting M3 Articolo n..: 11100198	For high-dynamic applications.
	Mounting kit 047 Torque arm, 1-arm, bolt circle ø63...94 mm, mounting M4 Articolo n..: 11113210	Universal torque arm for mounting hole circle 63...94 mm Flexible 30° alignment
	Mounting kit 048 Torque arm, 1-arm, bolt circle ø76.5...83 mm, mounting M4 Articolo n..: 11124300	For low-dynamic applications and constant movements
	Mounting kit 099 Rigid mounting plate (1-arm, pitch circle diameter ø95 mm, mounting M6) Articolo n..: 11155325	Rigid mounting plate (1-arm, pitch circle diameter ø95 mm, mounting M6) with attachment point for Baumer torque arm size M6 (DMS 6) Suitable for an electrically isolated mounting.
	Fan cover clip 8 mm Articolo n..: 11106627	Encoder mount directly on the fan cover Self-holding clip for 8 mm grid dimension For quick and easy installation Operating temperature -40…+85 °C Fan cover clip made of polyamide 6.6 (PA 6.6)
	Clamping ring 12/31/ 8 M3 8.8 for EIL580 hollow shaft ø8...10 mm for clamping at A or B side Articolo n..: 11094674	Clamping ring with inside diameter 12 mm Suitable for EIL580 hollow shaft ø8...ø10 mm for clamping at A or B side
	Clamping ring 17/31/ 8 M3 8.8 for EIL580 hollow shaft ø12...15 mm for clamping at A side Articolo n..: 11094675	Clamping ring with inside diameter 17 mm Suitable for EIL580 hollow shaft ø12...ø15 mm for clamping at A side
	Insulating sleeve ø10 mm/ø12 mm/25 mm long Articolo n..: 11116921
	Insulating sleeve ø12 mm/ø14 mm/25 mm long Articolo n..: 11116923

Connettori e cavi

Female connector M23 with pin lock, 12-pin, CW

Articolo n..: 11141051

Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)).
Knurled nut with pin lock
EMC version
Temperature range -40...+100 °C

Programmazione accessori

	Handheld Programming Tool Z-PA-EI-H Articolo n..: 11120657	Battery operated stand-alone solution Intuitive, fully menu-driven programming Four user-assigned buttons for simple and quick programming Memory of several encoder configurations Backlit display LED status indicator Encoder diagnostic functions
	PC Programming Tool Z-PA-EI-P Articolo n..: 11120547	PC Programming Tool incl. Encoder Software Easy and intuitive operation Memory of several encoder configurations Encoder diagnostics with monitor output USB powered Product documentation by printing customized product labels
	Connection cable connector M12 / connector D-SUB, 0.2 m Articolo n..: 11119280	Connecting cable shielded with connector M12, 8-pin, female contacts on connector D-SUB, 9-pin, male contacts
	Connection cable connector M12 / connector D-SUB, 1 m Articolo n..: 11119720	Connecting cable shielded with connector M12, 8-pin, female contacts on connector D-SUB, 9-pin, male contacts
	Connection cable connector M23 (CW) / connector D-SUB, 0.2 m Articolo n..: 11119257	Connecting cable shielded with connector M23, 12-pin, female contacts, clockwise (CW) on connector D-SUB, 9-pin, male contacts
	Connection cable connector M23 (CW) / connector D-SUB, 1 m Articolo n..: 11119723	Connecting cable shielded with connector M23, 12-pin, female contacts, clockwise (CW) on connector D-SUB, 9-pin, male contacts