제품 포트폴리오
Strain Sensors – DST20 – Miniature strain sensor

소형 스트레인 센서

DST20

  • 제한된 설치 공간에서도 사용 가능
  • 열악한 산업 환경용
  • 플러그 연결이 있는 패시브 센서
제품 선택기에서 열기
The selected altAttribute does not exist!

표준 스트레인 센서

DST76

  • 측정 범위 ±500µm/m
  • 사용 분아별 매개변수화를 위한 통합 증폭기 전자 장치
  • 산업 옥내 사용
제품 선택기에서 열기
The selected altAttribute does not exist!

고성능 스트레인 센서

DST53

  • ≤ 250 ~ ± 2000µm/m의 크고 작은 측정 범위에 맞춰 최적화됨
  • 시중 최저 수준의 강성으로 기계 구조에 미치는 영향 최소화
  • 사용 분아별 매개변수화를 위한 통합 증폭기 전자 장치
  • 산업 옥내 사용
제품 선택기에서 열기
Strain Sensors – DST55R – Robust strain sensor for harsh environment – Long-term tight strain sensor DST55R – Strain sensor

옥외 환경에서의 사용을 위한 견고한 스트레인 센서

DST55R

  • 보호 등급 IP 69K
  • proTect+에 따라 장기간 견고함 테스트 완료
  • 부식 방지 범주 C5-M
  • 완전히 통합된 증폭기 전자 장치
제품 선택기에서 열기

하이라이트

스트레인 센서는 더 높은 force 영역 및 대형 구조에서 force 센서를 대신하기에 적합한 대안입니다. 이 센서는 force 센서와 달리 힘이 작용하는 곳 중간에 직접 설치되지 않고 해당 구성품의 표면에 나사로 고정됩니다. 표면의 응력을 측정하여 복잡하게 구성품을 조정하지 않고도 force를 정확하게 측정합니다.

제품 포트폴리오는 다양한 요구 사항과 특정 사용 분야의 폭넓은 범위를 포괄합니다. 이 제품군은 다양한 버전으로 제공되어 소형화, 견고성, 디지털 연결 기능 측면에서 만족감을 선사합니다. 일관성으로 가치를 발휘합니다.


사용 분야

Baumer 스트레인 센서를 사용하면 거의 모든 적용 영역에서 비용 효율적인 force 측정이 가능해집니다. 제한된 공간이나 열악한 옥외 작업, 산업 환경에 상관없이 Baumer는 항상 공정 중 큰 힘을 측정하기에 적합한 솔루션을 제공합니다.


Videos for easy parametrization
     

Adapt the Baumer force and strain sensors to match your application task of precise force measurements and benefit from smart features for maximum results. Used in combination with the Baumer Sensor Suite, you will fully exploit the capabilities of the force and strain sensors thanks to specific Add-ons and the intuitive user interface. Watch the tutorial and learn more about the Baumer IO-Link portfolio of force and strain sensors.

 

Show all videos


Your benefits
  • The clever alternative to force measurement using force sensors
    • Integrates easily into existing machines and facilities
    • Minimal engineering effort
  • Improved machine capability
    • Precise measurement and reliable control of process parameters
  • Optimized logistics
    • A single sensor will do for different sizes of machines
  • Time savings during servicing
    • Easy sensor replacement during servicing without the need for time-consuming re-calibration in the machine, thanks to factory-calibrated strain settings
    • Quicker and easier sensor installation and exchange

Technology

Standard Baumer strain sensors comprise strain body and strain gauge. The strain sensor is screwed onto a machine structure. The applied force causes deformation at the machine structure which is picked up by the strain body with the help of friction and causing strain on the material surface. The amount of strain is measured by the strain gauge on the strain body surface. The strain gauges convert the mechanical strain into a change in the electrical resistance and act as mechanical-electrical converters. The strain gauges being smartly interconnected to form a Wheatstone bridge allows for measuring even most minor strain. The gauge-measured strain this way generates a change in stress that is proportional to the strain, which can be easily evaluated by the integrated amplifier electronics.


Downloads
Brochures / Catalogs
Technical and Application Reports / White Paper


To the top