Fiber optic sensors

  • pulsed red LED
  • PNP
  • Teach-in
  • connector M12 5 pin
  • -25 … 55 °C
  • IP 65

Fiber optic sensors - OF10

  • Intuitive OLED display
  • Programmable input configurations
  • Crosstalk rejection between two sensors without a wire
  • Six AUTOSET modes
  • Advanced remote programming
Ambient conditions
Operating temperature -25 … +55 °C 5 … +55 °C
Protection class IP 65 IP 50
Electrical data
Current consumption max. (no load) 68 mA 50 mA
Current consumption typ. 50 mA 30 mA
Min. output pulse length 0.1 … 9999 ms
On / off delay 0.1 … 9999 ms
Output circuit PNP PNP
Output current 100 mA 150 mA
Output function Light / dark operate switchable Light / dark operate switchable
Response time / release time < 1 ms 0.05 ms (Ultra High Speed Mode)
0.125 ms (High Speed Mode)
0.25 ms (Standard Mode)
1 ms (High Resolution Mode)
4 ms (Long Range Mode)
16 ms (Ultra Long Range Mode)
Reverse polarity protection Yes Yes
Short circuit protection Yes Yes
Voltage drop Vd <1.8 VDC <2 VDC
Voltage supply range +Vs 10 … 30 VDC 8 … 30 VDC
General data
Actual range Sb (FSE 200C1002) 320 mm 840 mm
Adjustment Teach-in Teach-in: button / external
Alignment / soiled lens indicator LED green, flashing
Light indicator LED green OLED display
Light source Pulsed red LED Pulsed red LED
Output indicator LED yellow LED red
Sensing distance Tw (FUE 200C1003) 90 mm 210 mm
Suppression of reciprocal influence Yes Yes
Version Integrated alarm output
Wave length 660 nm 660 nm
Mechanical data
Connection types Connector M12 5 pin Connector M8 4 pin
Depth 60 mm 93.1 mm
Design Rectangular Rectangular
Height / length 33.2 mm 27.8 mm
Housing material PBT / PC Polycarbonate
Width / diameter 22 mm 10 mm
To the top