Blind or through hollow shaft ø12 mm

  • High resolution programmable encoder
  • Optical sensing method
  • Max. 320000 pulses per revolution
  • Programmable via BISS
  • Small profile depth
  • Blind or through hollow shaft ø12 mm

With through hollow shaft

  • Size ø58 mm
  • Precise optical sensing (interpolated)
  • Output signal level programmable (TTL or HTL)
  • Through hollow shaft, ø8…15 mm
  • Connection radial or tangential
  • Pulses per revolution 1...65536, programmable
  • High protection up to IP 67
  • High resistance to shock and vibrations
Technical data - electrical ratings
Approval UL approval / E217823 UL 508 / CSA 22.2
Consumption typ. 60 mA (5 VDC, w/o load)
40 mA (24 VDC, w/o load)
Consumption w/o load ≤70 mA
Duty cycle 45…55 % typical at 1024, 2048 ppr (further see table Duty cycle)
Emitted interference EN 61000-6-3 EN 61000-6-3
Initializing time ≤ 30 ms after power on
Interference immunity EN 61000-6-2 EN 61000-6-2
Output frequency ≤1300 kHz ≤300 kHz (TTL)
≤160 kHz (HTL)
Output signals A 90° B, N + inverted A+, B+, R+, A-, B-, R-
Output stages Antivalent
Push-pull short-circuit proof
TTL/RS422
HTL/push-pull
Programmable parameters Output level TTL/HTL
Pulse number 1...65536
Zero pulse width 90°/180°
Zero pulse position
Signal sequence
Pulses per revolution 4096 … 320000 1 … 65536
Reference signal Zero pulse, programmable Zero pulse 90° or 180°
Reverse polarity protection Yes
Sensing method Optical Optical
Short-circuit proof Yes
Voltage supply 5 VDC ±10 %
10...30 VDC
4.75...30 VDC
Technical data - mechanical design
Connection Connector M23, 12-pin
Cable 2 m
Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable
Material Housing: aluminium
Flange: aluminium
Housing: aluminium die-cast
Flange: aluminium
Operating speed ≤3000 rpm (pulse disc 5000)
≤6000 rpm (pulse disc 2048)
≤3000 rpm (+20 °C, IP 67)
≤6000 rpm (+20 °C, IP 65)
Operating temperature -20...+85 °C -40...+100 °C
Operating torque typ. 0.0175 Nm (IP 42)
0.047 Nm (IP 65)
Protection EN 60529 IP 65
IP 42
IP 65 (without shaft seal)
IP 67 (with shaft seal)
Relative humidity 95 % non-condensing 90 % non-condensing
Resistance EN 60068-2-6
Vibration 10 g, 10-200 Hz
EN 60068-2-27
Shock 50 g, 11 ms
EN 60068-2-6
Vibration 30 g, 10-2000 Hz
EN 60068-2-27
Shock 250 g, 6 ms
Shaft type ø12 mm (through hollow shaft) ø8...15 mm (through hollow shaft)
ø9.52 mm (through hollow shaft)
ø12.7 mm (through hollow shaft)
Size (flange) ø58 mm ø58 mm
Starting torque ≤0.025 Nm (+20 °C, IP 65)
≤0.03 Nm (+20 °C, IP 67)
Weight approx. 300 g 300 g
To the top