Denmark
dk
English
Blind or through hollow shaft up to ø25.4 mm |
Through hollow shaft ø20 to ø27 mm |
|
|
|
|
|
| Technical data - electrical ratings | ||
| Approval | UL approval / E63076 | |
| Consumption w/o load | ≤30 mA (24 VDC) ≤60 mA (5 VDC) |
≤100 mA |
| Emitted interference | EN 61000-6-4 | EN 61000-6-3 |
| Interference immunity | EN 61000-6-2 | EN 61000-6-2 |
| Output frequency | ≤150 kHz | ≤300 kHz (TTL) ≤160 kHz (HTL) |
| Output signals | A 90° B, N + inverted | A, B, N + inverted |
| Output stages | Linedriver/RS422 Push-pull short-circuit proof |
TTL linedriver (short-circuit proof) HTL push-pull (short-circuit proof) |
| Pulses per revolution | 1024 … 16384 | 2000 … 10000 |
| Reference signal | Zero pulse, width 90° | Zero pulse, width 90° |
| Reverse polarity protection | Yes (4.75...30 VDC) | Yes |
| Sensing method | Optical | Optical |
| Voltage supply | 5 VDC ±10 % 4.75...30 VDC |
5 VDC ±5 % 8...30 VDC |
| Technical data - mechanical design | ||
| Connection | Connector M23, 12-pin | Cable 1 m |
| Material | Housing: aluminium Flange: aluminium |
Housing: aluminium, black, powder-coated Shaft: stainless steel |
| Mounting kit | 050 | |
| Operating speed | ≤3800 rpm | ≤5000 rpm ≤3000 rpm IP 65 (>70 °C) |
| Operating temperature | -25...+85 °C (24 VDC) -40...+85 °C (optional) |
-20...+70 °C -20...+100 °C |
| Protection EN 60529 | IP 54 | IP 65 |
| Relative humidity | 95 % non-condensing | 90 % non-condensing |
| Resistance | EN 60068-2-6 Vibration 10 g, 16-2000 Hz EN 60068-2-27 Shock 200 g, 6 ms |
EN 60068-2-6 Vibration 10 g, 55-2000 Hz EN 60068-2-27 Shock 30 g, 11 ms |
| Rotor moment of inertia | 2000 gcm² | |
| Shaft type | ø20 mm (blind hollow shaft) ø25 mm (blind hollow shaft) |
ø20 mm (through hollow shaft) ø22 mm (through hollow shaft) ø25 mm (through hollow shaft) ø27 mm (through hollow shaft) |
| Size (flange) | ø75 mm | ø80 mm |
| Starting torque | ≤0.025 Nm (+20 °C) | |
| Weight approx. | 700 g | 580 g |
