2. Product Overview
  3. Process sensors
  4. Pressure measurement
  5. With flush membrane
  6. With flush clamping connection
  7. PBMH
Technical data
Performance characteristics
Measuring range
  • -1 … 40 bar
Min. measuring span
  • 0.1 bar
Max. measuring span
  • 40 bar
Pressure type
  • Absolute
  • Relative (gauged)
Standard error of measurement (BFSL)
  • ± 0.04 % FSR
  • ± 0.1 % FSR
  • Including non-linearity, hysteresis and non-repeatability according BFSL
  • For turndown, multiply this value by the applied turndown ratio
Max. measuring error
  • ± 0.1 % FSR
  • ± 0.25 % FSR
  • Including zero-point and span error, nonlinearity (by terminal base line), hysteresis and non-repeatability (EN 61298-2)
  • For turndown, multiply this value by the applied turndown ratio
Temperature coefficient
  • ≤ 0.03 % FSR/10 K , measuring span
  • ≤ 0.03 % FSR/10 K , zero point
Compensated temperature range
  • -40 … 85 °C
Long term stability
  • ≤ 0.1 % FSR/a , measuring range > 1 bar
  • ≤ 1 mbar , measuring range ≤ 1 bar
Max. turndown ratio
  • 5 : 1
Rise time (10 ... 90 %)
  • ≤ 5 ms
IO-Link interface
IO-Link version
  • 1.1
IO-Link port type
  • Class A
Baud rate
  • 38,4 kbaud (COM2)
Cycle time
  • ≥ 2.3 ms
Process data length
  • 24 bit
SIO-mode
  • No
Process data (cyclic)
  • Process pressure
Diagnostic data (acyclic)
  • Process temperature
Compliance and approvals
Explosion protection
  • ATEX II 1/2G Ex ia IIC T4/T6 Ga/Gb
  • ATEX II 1/2G Ex ia IIC T3/T4/T6 Ga/Gb
  • ATEX II 1D Ex ia IIIC T (200) 107 °C IP6X Da
  • ATEX II 1G Ex ia IIC T4/T6 Ga
  • ATEX II 1G Ex ia IIC T3/T4/T6 Ga
Downloads
Data sheet
Operating Manual
Certificates / approvals
Technical Reports / White Paper
Software
3D CAD / CAE

Drawings
Drawings

Housing with connector M12-A, 4-pin

(png | 29 KB)

Housing with connector DIN EN 175301-803 A (DIN 43650 A), 4-pin

(png | 54 KB)

Housing with cable outlet, 3-wire, 1.5 m length

(png | 17 KB)

Field housing with cable gland

(png | 95 KB)

BHC 3A DN 38, membrane Ø 19 mm (BCID: B01)

(png | 24 KB)

Tri-Clamp Ø 50.5, membrane Ø 25 mm (BCID: C04)

(png | 17 KB)

Tri-Clamp Ø 24.9, membrane Ø 16 mm (BCID: C01)

(png | 14 KB)

Tri-Clamp Ø 50.5, membrane Ø 19 mm (BCID: C03)

(png | 16 KB)

Tri-Clamp Ø 64.0, membrane Ø 25 mm (BCID: C05)

(png | 17 KB)

BHC 3A DN 76, membrane Ø 25 mm (BCID: B02)

(png | 21 KB)

Tri-Clamp Ø 34.0, membrane Ø 19 mm (BCID: C02)

(png | 14 KB)

DIN 11864-3-A (Aseptic Clamp), DN25, Ø 50.5, female thread, membrane Ø 25 mm (BCID: H51)

(png | 16 KB)

Varivent® DN 32 … 125; 1 1/2" … 6" (Type N), Ø 68, membrane Ø 25 mm (BCID: V02)

(png | 21 KB)

Varivent® DN 25; 1" (Type F), Ø 50, membrane Ø 25 mm (BCID: V01)

(png | 22 KB)

Cooling neck

(png | 61 KB)
Accessories
Programming tool
Accessories process sensors – FlexProgrammer 9701 FlexProgrammer 9701
Configuration tool for process sensors

Article no.: 10260076
  • Operated from a PC, supplied from the USB port
  • Remote operation, supplied from a battery
  • User-friendly software with help menus
  • CleverLevel LFFS / LBFH / LBFI / LBFS / LBFS hanging / PL20, CombiPress PFMH / PFMN, CombiTemp TFRH / TFRN, CombiLyz AFI4 / AFI5, CombiView DFON, PBMH, PBMH autoclavable, PBMN flush, PBMN low pressure, PBMN high pressure, PBSN, PP20S, FlexTop 22xx, FlexTemp 23xx, TCR6, TE2, TER8, PT20, TFR5
Accessories
Accessories process sensors – ZEX-ALL.B28RD100 ZEX-ALL.B28RD100
Dual-channel safety barrier (with diode return channel)

Article no.: 11217062
  • Applicable for all Baumer Ex i 4 … 20 mA current loop sensors and Ex i LBFH/LBFI level switches
  • DIN rail mounted
  • HART compatible
  • Earthed field circuit
The selected altAttribute does not exist! CombiView DFON
Loop powered graphical display
  • Fits for all 4 ... 20 mA transmitters
  • Graphical display with backlight
  • Showing errors and limits by steady or flashing colors
  • Fits Baumer CombiSeries (Ø80 mm FlexHousing)
  • Option: Two configurable relay outputs
  • Programmable by touch screen
  • Easy and fully programmable with FlexProgrammer 9701
  • ATEX and cULus
Gaskets – ZPX3-B232 – ZPX3-B332 – ZPX3-B532 ZPX3-B232
EPDM

Article no.: 11178907

  • ISO 2852 (Tri-Clamp), DN 38, Ø 50.5
  • EPDM
  • FDA compliant
Gaskets – ZPX3-B232 – ZPX3-B332 – ZPX3-B532 ZPX3-B332
FKM (Viton®)

Article no.: 11178908

  • ISO 2852 (Tri-Clamp), DN 38, Ø 50.5
  • FKM (Viton®)
  • FDA compliant
Gaskets – ZPX3-B232 – ZPX3-B332 – ZPX3-B532 ZPX3-B532
Silicone

Article no.: 11178909

  • ISO 2852 (Tri-Clamp), DN 38, Ø 50.5
  • Platinum Silicone
  • FDA compliant
O-Rings – ZPX2-112 – ZPX2-123 – ZPX2-132 – ZPX2-410 – ZPX2-420 – ZPX2-430 – ZPX2-610 – ZPX2-620 – ZPX2-630 – ZPX2-712 – ZPX2-722 – ZPX2-732 ZPX2-112
NBR

Article no.: 11165511

  • BHC 3A DN 38
  • NBR
O-Rings – ZPX2-112 – ZPX2-123 – ZPX2-132 – ZPX2-410 – ZPX2-420 – ZPX2-430 – ZPX2-610 – ZPX2-620 – ZPX2-630 – ZPX2-712 – ZPX2-722 – ZPX2-732 ZPX2-123
EPDM

Article no.: 11091329

  • BHC 3A DN 38
  • EPDM
  • 3-A
  • FDA compliant
O-Rings – ZPX2-112 – ZPX2-123 – ZPX2-132 – ZPX2-410 – ZPX2-420 – ZPX2-430 – ZPX2-610 – ZPX2-620 – ZPX2-630 – ZPX2-712 – ZPX2-722 – ZPX2-732 ZPX2-132
FKM (Viton®)

Article no.: 11165513

  • BHC 3A DN 38
  • FKM (Viton®)
O-Rings – ZPX2-223 – ZPX2-A22 – ZPX2-A32 – ZPX2-B22 – ZPX2-B32 – ZPX2-323 – ZPX2-823 ZPX2-223
EPDM

Article no.: 11088059

  • BHC 3A DN 76
  • EPDM
  • 3-A
  • FDA compliant
O-Rings – ZPX2-223 – ZPX2-A22 – ZPX2-A32 – ZPX2-B22 – ZPX2-B32 – ZPX2-323 – ZPX2-823 ZPX2-323
EPDM

Article no.: 11109174

  • Varivent® DN 32 … 125; 1 1/2" … 6" (Type N), Ø 68
  • EPDM
  • 3-A
  • FDA compliant
O-Rings – ZPX2-223 – ZPX2-A22 – ZPX2-A32 – ZPX2-B22 – ZPX2-B32 – ZPX2-323 – ZPX2-823 ZPX2-823
EPDM

Article no.: 11154605

  • Varivent® DN 25; 1" (Type F), Ø 50
  • EPDM
  • 3-A
  • FDA compliant
Gaskets – ZPX3-7232 – ZPX3-7262 – ZPX3-7332 – Gaskets and O-rings ZPX3-7232
EPDM

Article no.: 11109175

  • ISO 2852 (Tri-Clamp), DN 38, Ø 50.5
  • EPDM
  • 40 bar
  • FDA compliant
Gaskets – ZPX3-7234 ZPX3-7234
EPDM

Article no.: 11165220

  • ISO 2852 (Tri-Clamp), DN 38, Ø 50.5
  • EPDM
  • 40 bar
  • EHEDG
  • FDA compliant
Gaskets – ZPX3-7232 – ZPX3-7262 – ZPX3-7332 – Gaskets and O-rings ZPX3-7262
EPDM

Article no.: 10306266

  • ISO 2852 (Tri-Clamp), DN 51, Ø 64.0
  • EPDM
  • 40 bar
  • FDA compliant
Gaskets – ZPX3-7232 – ZPX3-7262 – ZPX3-7332 – Gaskets and O-rings ZPX3-7332
FKM (Viton®)

Article no.: 11165287

  • ISO 2852 (Tri-Clamp), DN 38, Ø 50.5
  • FKM (Viton®)
  • 40 bar
  • FDA compliant
Mounting aids for hygienic connections – ZPX4-310 – ZPX4-610 – ZPX4-810 ZPX4-310

Article no.: 10341806

  • ISO 2852 (Tri-Clamp), DN 25, Ø 50.5
  • DIN 32676-B (Tri-Clamp), DN 26.9, Ø 50.5
  • DIN 32676-C (Tri-Clamp), DN 1", Ø 50.5
  • ISO 2852 (Tri-Clamp), DN 33.7; 38, Ø 50.5
  • DIN 32676-A (Tri-Clamp), DN 32; 40, Ø 50.5
  • DIN 32676-B (Tri-Clamp), DN33.7, Ø 50.5
  • DIN 32676-C (Tri-Clamp), DN 1 1/2", Ø 50.5
  • BHC 3A DN 38
  • AISI 304 (1.4301)
  • 40 bar
Mounting aids for hygienic connections – ZPX4-320 – Hygienic weld-in sleeves – Weld-in sleeves ZPX4-320

Article no.: 11112854

  • ISO 2037, Ø 38.0 x 1.2
  • ISO 2037, Ø 38.0 x 1.6
  • AISI 316L (1.4404)
  • 40 bar
Mounting aids for hygienic connections – ZPX4-310 – ZPX4-610 – ZPX4-810 ZPX4-610

Article no.: 11109162

  • ISO 2852 (Tri-Clamp), DN 40; 51, Ø 64.0
  • DIN 32676-A (Tri-Clamp), DN 50, Ø 64.0
  • DIN 32676-B (Tri-Clamp), DN 42.4; 48.3, Ø 64.0
  • DIN 32676-C (Tri-Clamp), DN 2", Ø 64.0
  • AISI 304 (1.4301)
  • 40 bar
Mounting aids for hygienic connections – ZPX4-310 – ZPX4-610 – ZPX4-810 ZPX4-810

Article no.: 11083160

  • BHC 3A DN 76
  • AISI 304 (1.4301)
  • 40 bar
Blind plugs – ZPX5-82 ZPX5-82

Article no.: 11039070

  • BHC 3A DN 38
  • AISI 316L (1.4404)
  • 40 bar
  • 3-A
Blind plugs – ZPX5-92 ZPX5-92

Article no.: 11109168

  • BHC 3A DN 76
  • AISI 316L (1.4404)
  • 10 bar
  • 3-A
Welding mandrels – ZPX6-86 ZPX6-86

Article no.: 11122963

  • BHC 3A DN 38
  • Brass
  • 40 bar
Welding mandrels – ZPX6-96 ZPX6-96

Article no.: 11122965

  • BHC 3A DN 76
  • Brass
  • 70 bar
Hygienic weld-in sleeves – ZPW2-621 ZPW2-621

Article no.: 11043353

  • Welding connection Ø 55 x 32
  • AISI 316L (1.4404)
  • 40 bar
  • EHEDG
  • 3-A
Hygienic weld-in sleeves – ZPW2-626 ZPW2-626

Article no.: 11039934

  • Welding connection DN 38, Ø 38 x 40
  • AISI 316L (1.4404)
  • 40 bar
  • EHEDG
  • 3-A
Hygienic weld-in sleeves – ZPW2-721 ZPW2-721

Article no.: 10319372

  • Welding connection Ø 120 x 32
  • AISI 316L (1.4404)
  • 10 bar
  • EHEDG
  • 3-A
ESG 34AY0200
Connector M12, 4 pin, straight, 2 m, V4A-PP

Article no.: 11166444

  • Connecting cable for Connector type M12
  • 2 m
  • Unshielded
  • Food & Beverage
ESG 34AY0500
Connector M12, 4 pin, straight, 5 m, V4A-PP

Article no.: 11166445

  • Connecting cable for Connector type M12
  • 5 m
  • Unshielded
  • Food & Beverage
ESG 34AY1000
Connector M12, 4 pin, straight, 10 m, V4A-PP

Article no.: 11166446

  • Connecting cable for Connector type M12
  • 10 m
  • Unshielded
  • Food & Beverage
ESG 34AY2500
Connector M12, 4 pin, straight, 25 m, V4A-PP

Article no.: 11166447

  • Connecting cable for Connector type M12
  • 25 m
  • Unshielded
  • Food & Beverage
ESW 33AY0200
Connector M12, 4 pin, angular, 2 m, V4A-PP

Article no.: 11166448

  • Connecting cable for Connector type M12
  • 2 m
  • Unshielded
  • Food & Beverage
ESW 33AY0500
Connector M12, 4 pin, angular, 5 m, V4A-PP

Article no.: 11166449

  • Connecting cable for Connector type M12
  • 5 m
  • Unshielded
  • Food & Beverage
ESW 33AY1000
Connector M12, 4 pin, angular, 10 m, V4A-PP

Article no.: 11166450

  • Connecting cable for Connector type M12
  • 10 m
  • Unshielded
  • Food & Beverage
ESW 33AY2500
Connector M12, 4 pin, angular, 25 m, V4A-PP

Article no.: 11166451

  • Connecting cable for Connector type M12
  • 25 m
  • Unshielded
  • Food & Beverage
ESG 34AH0200
Connector M12, 4 pin, straight, 2 m

Article no.: 10132540

  • Connecting cable for Connector type M12
  • 2 m
  • Unshielded
  • Suitable for flexible cable carriers
ESG 34AH0500
Connector M12, 4 pin, straight, 5 m

Article no.: 10132548

  • Connecting cable for Connector type M12
  • 5 m
  • Unshielded
  • Suitable for flexible cable carriers
ESG 34AH1000
Connector M12, 4 pin, straight, 10 m

Article no.: 10132549

  • Connecting cable for Connector type M12
  • 10 m
  • Unshielded
  • Suitable for flexible cable carriers
ESW 33AH0200
Connector M12, 4 pin, angular, 2 m

Article no.: 10127803

  • Connecting cable for Connector type M12
  • 2 m
  • Unshielded
  • Suitable for flexible cable carriers
ESW 33AH0500
Connector M12, 4 pin, angular, 5 m

Article no.: 10127804

  • Connecting cable for Connector type M12
  • 5 m
  • Unshielded
  • Suitable for flexible cable carriers
ESW 33AH1000
Connector M12, 4 pin, angular, 10 m

Article no.: 10127805

  • Connecting cable for Connector type M12
  • 10 m
  • Unshielded
  • Suitable for flexible cable carriers
ESG 34AH0200G
Connector M12, 4 pin, straight, 2 m, shielded

Article no.: 11046262

  • Connecting cable for Connector type M12
  • 2 m
  • Shielded
  • Suitable for flexible cable carriers
ESG 34AH0500G
Connector M12, 4 pin, straight, 5 m, shielded

Article no.: 11046263

  • Connecting cable for Connector type M12
  • 5 m
  • Shielded
  • Suitable for flexible cable carriers
ESG 34AH1000G
Connector M12, 4 pin, straight, 10 m, shielded

Article no.: 10125473

  • Connecting cable for Connector type M12
  • 10 m
  • Shielded
  • Suitable for flexible cable carriers
ESW 33AH0200G
Connector M12, 4 pin, angular, 2 m, shielded

Article no.: 11046259

  • Connecting cable for Connector type M12
  • 2 m
  • Shielded
  • Suitable for flexible cable carriers
ESW 33AH0500G
Connector M12, 4 pin, angular, 5 m, shielded

Article no.: 11046260

  • Connecting cable for Connector type M12
  • 5 m
  • Shielded
  • Suitable for flexible cable carriers
ESW 33AH1000G
Connector M12, 4 pin, angular, 10 m, shielded

Article no.: 10126464

  • Connecting cable for Connector type M12
  • 10 m
  • Shielded
  • Suitable for flexible cable carriers
ES 18A PG7
Connector M12, 4 pin, straight

Article no.: 10214558

  • Connector not pre-assembled for Connector type M12
  • Unshielded
ES 14A PG7
Connector M12, 4 pin, angular

Article no.: 10255464

  • Connector not pre-assembled for Connector type M12
  • Unshielded
To the top