Dati tecnici
Dati tecnici - Valori elettrici
- Immunità alle interferenze
- EN 61000-6-2
- Emissione di interferenze
- EN 61000-6-3
- Approvazione
- CE
- UL approval / E217823
- Option: DNV approval
Technical data - electrical ratings (square-wave)
- Voltage supply
- 4.75...30 VDC
- Consumption w/o load
- ≤70 mA
- Pulses per revolution
- 256 … 16384
- Phase shift
- 90 ° ±10°
- Duty cycle
- 40…60 %
- Reference signal
- Zero pulse, width 90°
- Sensing method
- Magnetic
- Output frequency
- ≤300 kHz
- Output signals
- A+, B+, R+, A-, B-, R-
- Output stages
- HTL
- TTL/RS422
Technical data - electrical ratings (SinCos)
- Voltage supply
- 5 VDC
- Consumption w/o load
- ≤70 mA
- Sinewave cycles per revolution
- 256
- Phase shift
- 90 ° ±5°
- Reference signal
- Zero pulse, width 90°
- Sensing method
- Magnetic
- Output signals
- A+, B+, R+, A-, B-, R-
- Output stages
- SinCos 1 Vpp
- Difference of SinCos amplitude
- ≤20 mV
- Harmonics typ.
- -40 dB
- DC offset
- ≤20 mV
Dati tecnici - progettazione meccanica
- Sensor head
- Standard signal processing
- Grandezza (flangia)
- ø405.4 mm
- Tipo di albero
- ø70...340 mm (through hollow shaft)
- Axial tolerance
- ±3 mm (wheel/head)
- Radial tolerance
- 0,1…2,2 mm (wheel/head)
- Classe di protezione EN 60529
- IP 67 (head)
- IP 68 (wheel)
- Velocità operativa
- ≤2000 rpm
- Materiale
- Housing sensing head: aluminium alloy
- Wheel: stainless steel (1.4104, option DNV: 1.4313)
- Temperatura operativa
- -40...+100 °C
- Resistenza
- IEC 60068-2-6
- Vibrazione 30 g, 55-2000 Hz
- IEC 60068-2-27
- Urti 300 g, 2 ms
- Accuracy of magnetic measure
- ±75 ″
- Allacciamento
- Flange connector M23, 12-pin
- Terminal box
Scaricare
Data sheet
-
Schede tecniche – MHGE 400
-
Schede tecniche – MHGE 400
-
Schede tecniche – MHGE 400
Operating Manual
-
MHGE 400 - HDmag
Certificates / approvals
-
Certificate DNV GL - HOG 11, HOG 11 G, MHGX
Declaration of conformity
-
DoC / CoC - LMAX, MHAx, MHGx, MHG, MQR3000F, MIR3000F, MQR350A, MIR350A
3D CAD / CAE
-
MHGE400 B5 G140 / STEP
-
MHGE400 B5 G340 / STEP
-
MHGE400 B5 H180 / STEP
-
MHGE400 B5 H270 / STEP
-
MHGE400 B5 Z100 / STEP
-
MHGE400 B5 Z200 / STEP
Accessori
Connettori e cavi
|
Sensor cable for encoders HEK 8 |
The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors. |