Technical data
Technical data - electrical ratings
- Voltage supply
- 9...26 VDC
- 5 VDC ±5 %
- Consumption w/o load
- ≤100 mA
- Pulses per revolution
- 100 … 512
- Output signals
- K1, K2, K0 + inverted
- Reference signal
- Zero pulse, width 90°
- Output frequency
- ≤120 kHz
- Phase shift
- 90 ° ±20°
- Duty cycle
- 40…60 %
- Sensing method
- Optical
- Output stages
- HTL
- TTL/RS422
- Interference immunity
- EN 61000-6-2
- Emitted interference
- EN 61000-6-3
- Approval
- CE
- UL approval / E217823
Technical data - mechanical design
- Size (flange)
- ø58 mm
- Shaft type
- ø12...16 mm (blind hollow shaft)
- Axial tolerance
- ± 0.2 mm
- Radial tolerance
- ±0.05 mm (with zero pulse)
- ±0.2 mm (without zero pulse)
- Protection EN 60529
- IP 55 (≤12000 U/min)
- IP 23 (≤30000 rpm)
- Operating speed
- ≤12000 rpm
- ≤30000 rpm (option)
- Material
- Housing: aluminium
- Shaft: stainless steel
- Rotor moment of inertia
- 18 gcm²
- Operating temperature
- -20...+85 °C
- Resistance
- IEC 60068-2-6
- Vibration 10 g, 10-2000 Hz
- IEC 60068-2-27
- Shock 100 g, 6 ms
- Weight approx.
- 180 g
- Connection
- Connecting terminal
Downloads
Data sheet
-
Data sheet – HG 6
-
Data sheet – HG 6
-
Data sheet – HG 6
-
Data sheet – HG 6
Operating Manual
-
HG 6
Declaration of conformity
-
DoC / CoC - FOG6, HG6, HOG60, HOGS60, OG6, OG60, OGN6, OGS60
Accessories
Connectors and cables
|
Sensor cable for encoders HEK 8 |
The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors. |
Diagnostic accessories
|
Analyzer for encoders HENQ 1100
Article no.: 11075858 |
|
|
|
Appareil d'analyse pour codeurs HENQ 1100 B
avec batterie intégrée
Article no.: 11075880 |
|