Blind hollow shaft ø10 to ø16 mm

  • Encoder with blind hollow shaft ø10...16 mm
  • Up to 2048 sinewaves cycles per turn
  • Sine output signals 1 Vpp
  • Mounting by torque support
  • Cable output radial

Through hollow shaft ø10 to ø14 mm

  • Robust industry standard
  • Wide operating temperature range
  • Up to 2048 sinewaves cycles per turn
  • Sine output signals 1 Vpp
  • LowHarmonics® signal quality
  • Detachable cable – tangential outlet
  • Perfect control quality at all rotational speeds
Datos técnicos: diseño mecánico
Connection Cable 1 m Board connector, 8-pin
Material Housing: aluminium, black, powder-coated
Shaft: stainless steel
Housing: aluminium
Shaft: stainless steel
Mounting kit 050
Operating speed ≤8000 rpm ≤6000 rpm
Operating temperature -20...+85 °C -30...+100 °C
Protection EN 60529 IP 65 IP 65
Relative humidity 90 % non-condensing 90 % non-condensing
Resistance EN 60068-2-6
Vibration 10 g, 55-2000 Hz
EN 60068-2-27
Shock 30 g, 11 ms
EN 60068-2-6 Vibration 20 g, 60-2000 Hz
EN 60068-2-27 Shock 100 g, 6 ms
Shaft type ø10...16 mm (blind hollow shaft) ø10 mm (through hollow shaft)
ø12 mm (through hollow shaft)
ø14 mm (through hollow shaft)
Size (flange) ø80 mm ø58 mm
Starting torque ≤0,01 Nm (+20 °C) ≤0,015 Nm (+20 °C)
Weight approx. 550 g 150 g
Datos técnicos: valores eléctricos nominales
Consumption w/o load ≤90 mA ≤100 mA
Emitted interference EN 61000-6-3
Interference immunity EN 61000-6-2
Output frequency ≤180 kHz (-3 dB) ≤180 kHz (-3 dB)
Output signals A, B, 0 A, B, 0
Output stages SinCos 1 Vpp SinCos 1 Vpp
Reverse polarity protection Yes Yes
Sensing method Optical Optical
Sinewave cycles per revolution 1024 … 2048 1024 … 2048
Voltage supply 5 VDC ±10 %
8...30 VDC
5 VDC ±10 %
8...30 VDC
Hasta la cima