Datos técnicos
Condiciones ambientales
Temperatura operación
  • -20 … 60 °C
Temperatura almacenaje
  • -40 … 80 °C
Grado de protección (EN 60529)
  • IP 20
Humedad
  • < 80,0 % , non-condensing
Señal de entrada
Min. threshold voltage
  • 5 V DC
Impedance
  • ≥ 5080 Ω
Señal de salida
Characteristic
  • SPDT relay contact (single pole, double throw)
Corriente nominal
  • 4 A @ 250 V AC
  • 1 A @ 30 V DC
Contact resistance
  • < 0,1 Ω @ < 100000 switching cycles
Durability
  • > 20000000 switching cycles
Carcasa
Stilo
  • DIN EN 60715 standard rail TH35
  • Snap-on mounting
Tamaño global
  • 29 x 90 x 120 mm
Material
  • Polyamide
Weight
  • 200 g
Conexión eléctrica
Conector
  • 3-pin plug-in terminals (4 x)
Power bus
  • Plug-in terminals for loop through (2 x)
Included accessories
  • Plug-in screw terminal blocks (3 x)
  • Power bus jumper, cable set (1 x)
  • Dummy plug for protection against contact (1 x)
Max. wire gauge
  • 2,5 mm2
Fuente de alimentaicón
Tensión alimentación
  • 22 … 120 V DC
  • 90 … 253 V AC , 50 … 60 Hz
Power consumption
  • 3 W , max.
Protección contra polaridad inversa
  • Si
Aprobaciones y certificaciones
EMC
  • EN 61326-1
Explosion protection
  • ATEX I/II (M1) (1)G/D [Ex ia] I/IIC – [Ex iaD]
Please note
  • For the application in Ex zone you have to respect the conditions mentioned in the ATEX Type Examination Certificate (LCIE 03 ATEX 6078X).You will find the relevant certificates and instructions at www.baumer.com
Maximum output voltage, Uo
  • 25,2 V DC
Maximum output current, Io
  • 99 mA
Maximum output power, Po
  • 623 mW
Max. external capacitance, Co
  • 107 nF , for IIC
  • 820 nF , for IIB
Max. external inductance, Lo
  • 3 mH , for IIC
  • 11 mH , for IIB

Descargas
Operating Manual
Certificates / approvals
Technical Reports / White Paper
CAD

Hasta la cima