Caractéristiques techniques
Datos técnicos: valores eléctricos nominales
Voltage supply
  • 9...30 VDC
  • 5 VDC ±5 %
Consumption w/o load
  • ≤100 mA
Pulses per revolution
  • 300 … 5000
Phase shift
  • 90 ° ±20°
Duty cycle
  • 40…60 %
Reference signal
  • Zero pulse, width 90°
Output frequency
  • ≤120 kHz
  • ≤300 kHz (on request)
Output signals
  • K1, K2, K0 + inverted
  • Error output (option EMS)
Output stages
  • HTL-P (power linedriver)
  • TTL/RS422
Sensing method
  • Optical
Interference immunity
  • EN 61000-6-2
Emitted interference
  • EN 61000-6-3
Approval
  • CE
  • UL approval / E217823
Caractéristiques mécaniques
Taille (bride)
  • ø115 mm
Type d’axe
  • ø11 mm axe
Charge
  • ≤250 N axiale
  • ≤350 N radiale
Bride
  • Bride EURO B10
Protection EN 60529
  • IP 56
Vitesse de rotation
  • ≤12000 t/min (mécanique)
Couple en fonctionn. typ.
  • 2 Ncm
Moment d'inertie rotor
  • 200 gcm²
Matière
  • Boîtier: fonte d'aluminium
  • Axe: inox
Température d'utilisation
  • -30...+100 °C
  • -25...+100 °C (>3072 impulsions)
Résistance
  • IEC 60068-2-6
  • Vibrations 10 g, 10-2000 Hz
  • IEC 60068-2-27
  • Choc 300 g, 1 ms
Protection contre la corrosion
  • IEC 60068-2-52 brouilla. salins
  • pour les conditions ambiantes C4 selon ISO 12944-2
Protection contre les explosions
  • II 3 G Ex ec IIC T4 Gc (gaz)
  • II 3 D Ex tc IIIB T135°C Dc (poussière)
  • (seulement avec l'option ATEX)
Raccordement
  • 2x boîte à bornes
Poids
  • 2 kg

Téléchargements
Fiche technique
Instructions d'utilisation
Declaration of conformity

Accessories
Accessoires de montage
Accouplement flexible K 35 (axe ø6...12 mm)
  • Accouplement de haute qualité, résistant à la torsion et sans jeu
  • Compensation des erreurs de montage
  • Raideur du ressort rotatif adaptée et constante
  • Version isolée pour protéger les roulements contre les courants induits (ø11 H7)
  • Rainure additionnelle pour clavette
Accouplement flexible K 50 (axe ø11...16 mm)
  • Accouplement de haute qualité, résistant à la torsion et sans jeu
  • Compensation des erreurs de montage
  • Raideur du ressort rotatif adaptée et constante
  • Version isolée pour protéger les roulements contre les courants induits (ø11 H7)
  • Rainure additionnelle pour clavette
Spring disk coupling K 60 (shaft ø11...22 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Additional key possible
Connectors and cables
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.

Diagnostic accessories
Analyzer for encoders HENQ 1100

Article no.: 11075858

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Article no.: 11075880

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages

To the top