Datos técnicos
Datos técnicos: valores eléctricos nominales
Voltage supply
  • 9...26 VDC
  • 5 VDC ±5 %
Consumption w/o load
  • ≤100 mA
Pulses per revolution
  • 100 … 512
Output signals
  • K1, K2, K0 + inverted
Reference signal
  • Zero pulse, width 90°
Output frequency
  • ≤120 kHz
Phase shift
  • 90 ° ±20°
Duty cycle
  • 40…60 %
Sensing method
  • Optical
Output stages
  • HTL
  • TTL/RS422
Interference immunity
  • EN 61000-6-2
Emitted interference
  • EN 61000-6-3
Approval
  • CE
  • UL approval / E217823
Datos técnicos: diseño mecánico
Size (flange)
  • ø58 mm
Shaft type
  • ø12...16 mm (blind hollow shaft)
Axial tolerance
  • ± 0,2 mm
Radial tolerance
  • ±0,05 mm (with zero pulse)
  • ±0,2 mm (without zero pulse)
Protection EN 60529
  • IP 55 (≤12000 U/min)
  • IP 23 (≤30000 rpm)
Operating speed
  • ≤12000 rpm
  • ≤30000 rpm (option)
Material
  • Housing: aluminium
  • Shaft: stainless steel
Rotor moment of inertia
  • 18 gcm²
Operating temperature
  • -20...+85 °C
Resistance
  • IEC 60068-2-6
  • Vibration 10 g, 10-2000 Hz
  • IEC 60068-2-27
  • Shock 100 g, 6 ms
Weight approx.
  • 180 g
Connection
  • Connecting terminal

Descargas
Data sheet
Operating Manual
Declaration of conformity

Accesorios
Connectors and cables
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.

Diagnostic accessories
Analyzer for encoders HENQ 1100

Artículo no..: 11075858

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Artículo no..: 11075880

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages

Hasta la cima