HS35F

Robust industrial encoder up to IP 67 protection
Shock resistant up to 200 g's
Insulating insert to prevent high shaft currents from damaging bearings
Wide range voltage supply 4.75...30 VDC
Precision ≤60 arc-seconds for perfect process control
Max. 80000 pulses per revolution

preguntar por su disponibilidad

Datos técnicos

Mostrar todo

Datos técnicos: valores eléctricos nominales

Voltage supply

4.75...30 VDC

Reverse polarity protection

Consumption w/o load

≤40 mA (24 VDC)
≤130 mA (4.75 VDC) + output load, max. 250 mA

Pulses per revolution

1024 … 80000

Accuracy

≤60 arc-seconds

Sensing method

Optical

Output frequency

≤300 kHz (TTL)
≤160 kHz (HTL)

Output signals

A, B, Z
A, B, Z + complement, ½ cycle index gated with negative B channel

Output stages

Linedriver (TTL, 7272) Vout = 5 V, short-circuit proof
Push-pull (HTL, 7272) Vout = Vin, short-circuit proof

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-3

Approval

UL approval / E240061
RoHS compliant EU guideline 2011/65/EC
CE

Datos técnicos: diseño mecánico

Size (flange)

ø3.15" (ø80 mm)

Shaft type

ø0.375...1" (ø9.525...25.4 mm) (through hollow shaft isolated)

Bore runout

0.0016" (0.04 mm) TIR max.

Admitted misalignment

0.004" (0.1016 mm) radial TIR (end of shaft)
0.01" (0.254 mm) axial

Protection EN 60529

IP 54
IP 65
IP 67

Operating speed

≤5000 rpm (see temperature diagram)

Bearing

52100 SAE high carbon steel (ABEC 5)

Starting torque

≤3 in-oz (77 °F, IP 65)
≤0,02 Nm (+25 °C, IP 65)

Rotor moment of inertia

2,3 oz-in² (420 gcm²)

Service life

Bearing: typ. 13 billion rev. (89000 h/2500 rpm)

Material

Housing: aluminium, powder-coated
Shaft: stainless steel

Operating temperature

-40...+212 °F (-40...+100 °C), (fixed cable): see temperature diagram

Relative humidity

98 % non-condensing

Resistance

EN 60068-2-6 Vibration 20 g, 60-2000 Hz
EN 60068-2-27 Shock 200 g, 6 ms

Connection

MIL-connector, 7-pin
MIL-connector, 10-pin
Cable (AWG26 wire)

Weight approx.

23 oz.
660 g

Descargas

Mostrar todo

Data sheet

Catálogo – HS35F
- DE (pdf | 3 MB)
Catálogo – HS35F
- EN (pdf | 3 MB)
Catálogo – HS35F
- FR (pdf | 3 MB)

Quickstart

HS35
- DE/EN (pdf | 5 MB)
Protective cage HS35
- DE (pdf | 236 KB)
Protective cage HS35
- EN (pdf | 236 KB)

Certificates / approvals

UL certificate E240061
- EN (pdf | 167 KB)

Declaration of conformity

DoC / CoC - HS35F
- BG/CZ/DE/DK/EN/ES/FI/FR/GR/HU/KO/LT/LV/NL/NO/PL/PT/RO/SI/SK (pdf | 488 KB)

CAD

Tether T1 - 3D drawing / PDF
- Download (pdf | 266 KB)
Tether T1 - 3D drawing / STEP
- STEP (zip | 52 KB)
Tether T3 - 3D drawing / PDF
- Download (pdf | 255 KB)
Tether T3 - 3D drawing / STEP
- STEP (zip | 51 KB)
Tether T4 - 3D drawing / PDF
- Download (pdf | 254 KB)
Tether T4 - 3D drawing / STEP
- STEP (zip | 51 KB)
Tether T5 - 3D drawing / PDF
- Download (pdf | 254 KB)
Tether T5 - 3D drawing / STEP
- STEP (zip | 52 KB)
HS35 3D drawing cable, ø25.4 mm, IP54/IP65 / PDF
- (pdf | 418 KB)
HS35 3D drawing cable, ø25.4 mm, IP54/IP65 / STEP
- (zip | 878 KB)
HS35 3D drawing cable, ø25.4 mm, IP67 / PDF
- (pdf | 456 KB)
HS35 3D drawing cable, ø25.4 mm, IP67 / STEP
- (zip | 949 KB)
HS35 3D drawing connector 7-pin, ø25.4 mm, IP54/IP65 / PDF
- (pdf | 487 KB)
HS35 3D drawing connector 7-pin, ø25.4 mm, IP54/IP65 / STEP
- (zip | 791 KB)
HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / PDF
- (pdf | 614 KB)
HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / STEP
- (zip | 755 KB)
HS35 3D drawing connector 10-pin, ø25.4 mm, IP54/IP65 / PDF
- (pdf | 577 KB)
HS35 3D drawing connector 10-pin, ø25.4 mm, IP54/IP65 / STEP
- (zip | 683 KB)
HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / PDF
- (pdf | 614 KB)
HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / STEP
- (zip | 755 KB)
Reducer insert HS35 ø0.375” (ø9.525 mm) - 3D drawing / STEP
- (zip | 21 KB)
Reducer insert HS35 ø0.50” (ø12.7 mm) - 3D drawing / STEP
- (zip | 21 KB)
Reducer insert HS35 ø0.625” (ø15.875 mm) - 3D drawing / STEP
- (zip | 24 KB)
Reducer insert HS35 ø0.75” (ø19.05 mm) - 3D drawing / STEP
- (zip | 22 KB)
Reducer insert HS35 ø0.87” (ø22.225 mm) - 3D drawing / STEP
- (zip | 17 KB)
Reducer insert HS35 ø10 mm - 3D drawing / STEP
- (zip | 22 KB)
Reducer insert HS35 ø12 mm - 3D drawing / STEP
- (zip | 22 KB)
Reducer insert HS35 ø14 mm - 3D drawing / STEP
- (zip | 24 KB)
Reducer insert HS35 ø15 mm - 3D drawing / STEP
- (zip | 22 KB)
Reducer insert HS35 ø16 mm - 3D drawing / STEP
- (zip | 22 KB)
Reducer insert HS35 ø18 mm - 3D drawing / STEP
- (zip | 21 KB)
Reducer insert HS35 ø20 mm - 3D drawing / STEP
- (zip | 21 KB)
Protective cover HS35 - 3D drawing / STEP
- STEP (zip | 3 MB)

Accesorios

Mostrar todo

Mounting accessories

	Torque arm T1 Artículo no..: 11076339	Fast and easy mounting on encoder. Prevents against bearing force overlaod. Fixed length, for bolt 3/8" with plastic clip and screws
	Torque arm T3 Artículo no..: 11075692	Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point. Adjustable length, for bolt 1/4" with plastic clip and screws
	Torque arm T4 Artículo no..: 11075690	Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point. Adjustable length, for bolt 5/16" with plastic clip and screws
	Torque arm T5 Artículo no..: 11071506	Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point. Adjustable length, for bolt 3/8" with plastic clip and screws
	Torque arm T6 Artículo no..: 11167978	Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point. Adjustable length, kit for bolts 1/4", 5/16" and 3/8" with plastic clip and screws
	Reducer insert HS35 ø0.375" (ø9.525 mm) Artículo no..: 11084462	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø0.50" (ø12.7 mm) Artículo no..: 11078636	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø0.625" (ø15.875 mm) Artículo no..: 11080114	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø0.75" (ø19.05 mm) Artículo no..: 11078639	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø0.87" (ø22.225 mm) Artículo no..: 11078654	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø10 mm Artículo no..: 11087744	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø12 mm Artículo no..: 11087745	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø14 mm Artículo no..: 11087746	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø15 mm Artículo no..: 11148651	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø16 mm Artículo no..: 11087747	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø18 mm Artículo no..: 11087748	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø20 mm Artículo no..: 11087750	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Dust cap HS35 Artículo no..: 11075459	Fast and easy mounting on encoder backside. Prevents encoder bearing against dust, dirt and fluids. Sealing up to IP 67.
	Protective cage HS35 Artículo no..: 11080884	Protective cover; for NEMA 56C-face (4.5") and fan-cover. For attachment to a fan cover hammer head bolts are recommended (not included).

Connectors and cables

	NAC 25E 7-pin Mil Spec Mating Connector Artículo no..: 11128642	NAC 25E 7-pin Mil Spec Mating Connector (female)
	CNAC 25E 7-pin Mil Spec Mating Connector + cable L=10 ft (3.05 m) Artículo no..: 11078440	Shielded connection cable with mating connector NAC 25E 7-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves Cable length 10 ft (3.05 m)
	CNAC 25E 7-pin Mil Spec Mating Connector + cable L=20 ft (6.10 m) Artículo no..: 11078442	Shielded connection cable with mating connector NAC 25E 7-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves Cable length 20 ft (6.10 m)
	CNAC 25E 7-pin Mil Spec Mating Connector + cable L=30 ft (9.15 m) Artículo no..: 11078446	Shielded connection cable with mating connector NAC 25E 7-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves Cable length 30 ft (9.15 m)
	NAC 29H 10-pin Mil Spec Mating Connector Artículo no..: 11126235	NAC 29H 10-pin Mil Spec Mating Connector (female)
	CNAC 29H 10-pin Mil Spec Mating Connector + cable L=10 ft (3.05 m) Artículo no..: 11078307	Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves Cable length 10 ft (3.05 m)
	CNAC 29H 10-pin Mil Spec Mating Connector + cable L=20 ft (6.10 m) Artículo no..: 11078427	Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves Cable length 20 ft (6.10 m)
	CNAC 29H 10-pin Mil Spec Mating Connector + cable L=30 ft (9.15 m) Artículo no..: 11078428	Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves Cable length 30 ft (9.15 m)