France
fr
Français
Caractéristiques techniques
- Head A: Connection
- M12
- Head A: Angle cable outlet
- 0°
- Head A: Gender
- Female
- Head A: Coding
- A
- Head A: No. of poles
- 12
- Head A: LED
- No
- Head A: Width across flats
- AF13
- Head A: Tightening torque
- 0,6 Nm
- Head A: Knurled nut material
- Zinc-pressure die casting, surface Ni
- Head A: Body color
- Black
- Labeling sleeve side A
- Yes
- Head B: Connection
- Open-ended wires
- Labeling sleeve side B
- Yes
- Cable length
- 500 cm
- Length tolerance
- ± 7,5 cm
- Stripping length
- 80 mm
- Shielded
- Oui
- Conductor structure
- 18 × 0,1 mm
- AWG
- 26
- External sheath: Material
- PUR
- External sheath: Color
- Black
- Cable diameter
- 6,5 mm ± 5%
- Wire cross section
- 0.14 mm²
Données électriques
- Operating voltage
- max. 30 V AC/DC
- Nominal voltage
- 300 V
- Contact resistance
- max. 30 mOhm
- Operating current per contact
- max. 1,5 A
Données mécaniques
- Head A: Degree of protection
- IP65, IP66K, IP67
- Bending radius (mobile)
- min. 10 × outer diameter
- Bending radius (fixed)
- min. 5 × outer diameter
- No. of bending cycles (C-track)
- approx. 5000000 Cycles
- Torsion speed
- max. 35 cycles/min
- Torsion stress in °
- ± 30 °/m
- No. of torsion cycles
- approx. 2000000 Cycles
- Acceleration (C-track)
- max. 5 m/s²
- Travel speed (C-track)
- max. 3,3 m/s
Conditions ambiantes
- Temperature range (mobile)
- - 25 ...+ 80 °C
- Temperature range (fixed)
- - 25 ...+ 80 °C
- Cable: Temperature range (fixed)
- - 40 ...+ 80 °C
- Dragchain capable
- Oui
- Head A: Chemical resistance
- No
- Head A: Flame resistance
- HB (UL 94)
- Head A: Oil resistance
- ASTM 1 oil, mineral oils, limited to hydraulic oils
- Head A: Acid and alkali resistant
- No
- Head A: Pollution degree
- 3
- Cable: Chemical resistance
- Good (DIN EN 60811-404)
- Cable: Flame resistance
- Conform UL 1581 §1090 (H); CSA FT2; IEC 60332-2-2
- Cable: Oil resistance
- Good (DIN EN 60811-404)
- Cable: Silicone-free
- Oui
Téléchargements
Fiche technique
-
Fiche technique – CAM12.A12-11230359
-
Fiche technique – CAM12.A12-11230359
Certifications / Approbations
-
Declaration of Conformity – CE
Dessins
Side A: Technical drawing
Side A: Coding
Side B: Technical drawing
Connection diagram
Dessins
Accessoires
Torque wrench
|
CAM12.WS13-11238694
Numéro d'article: 11238694 |
|
|
CAM12.W13-11238690
Numéro d'article: 11238690 |
|