Technische Daten
Technische Daten - elektrisch
Betriebsspannung
  • 9...30 VDC
  • 5 VDC ±5 %
Betriebsstrom ohne Last
  • ≤100 mA
Impulse pro Umdrehung
  • 500 … 5000
Phasenverschiebung
  • 90 ° ±20°
Tastverhältnis
  • 45…55 %
  • 40…60 % (>3072 Impulse)
Referenzsignal
  • Nullimpuls, Breite 90°
Abtastprinzip
  • Optisch
Ausgabefrequenz
  • ≤120 kHz
  • ≤300 kHz (auf Anfrage)
Ausgangssignale
  • K1, K2, K0 + invertierte
  • Fehlerausgang (Option EMS)
Ausgangsstufen
  • HTL-P (power linedriver)
  • TTL/RS422
Wellenisolierung
  • Geeignet bis 2,8 kV
Übertragungslänge
  • ≤350 m bei 100 kHz (HTL-P)
  • ≤550 m bei 100 kHz (TTL)
Störfestigkeit
  • EN 61000-6-2
Störaussendung
  • EN 61000-6-3
Zulassung
  • CE
  • UL-Zulassung / E217823
Technische Daten - mechanisch
Baugrösse (Flansch)
  • ø99 mm
Wellenart
  • ø12...16 mm (einseitig offene Hohlwelle)
  • ø17 mm (Konuswelle 1:10)
Zulässige Wellenbelastung
  • ≤350 N axial
  • ≤450 N radial
Spiel der Motorwelle
  • 0,2  mm radial
Schutzart EN 60529
  • IP 66
Betriebsdrehzahl
  • ≤10000 U/min (mechanisch)
Betriebsdrehmoment
  • ≤6 Ncm
Trägheitsmoment Rotor
  • 160 gcm²
Werkstoff
  • Gehäuse: Aluminium, beschichtet
  • Welle: Edelstahl
Betriebstemperatur
  • -40...+100 °C
  • -40...+90 °C (Kabel unbewegt)
  • -25...+100 °C (>3072 Impulse)
Widerstandsfähigkeit
  • IEC 60068-2-6
  • Vibration 20 g, 10-2000 Hz
  • IEC 60068-2-27
  • Schock 250 g, 6 ms
Korrosionsschutz
  • IEC 60068-2-52 Salzsprühnebel
  • für Umgebungsbedingungen C4 nach ISO 12944-2
Explosionsschutz
  • II 3 G Ex ec IIC T4 Gc (Gas)
  • II 3 D Ex tc IIIC T135°C Dc (Staub)
  • (nur bei Option ATEX)
Anschluss
  • Klemmenkasten
  • Flanschdose M23, 12-polig
  • Kabel 1 m
Masse ca.
  • 1,3 kg

Downloads
Datenblatt
Betriebsanleitung
Konformitätserklärungen
3D CAD / CAE
  • HOG 86, Klemmenkasten radial, Hybridlager, Wellendurchmesser 16 mm / STEP


부속품
Montagezubehör
Montageset Erdungsband

제품번호: 11071906

Montageset Erdungsband (Länge des Erdungsbandes: ~230 mm) zum Anbau an den Geber.

Montage- und Demontageset

제품번호: 11077087

Montage- und Demontageset zur Befestigung eines einseitig offenen Dehgebers mit der Antriebswelle und zur Demontage des Gebers von der Antriebswelle.

Stützblech-Montageset R63 für Drehmomentstütze Grösse M6

제품번호: 11071850

Stützblech-Montageset R63 zum Anbau einer Drehmomentstütze Grösse M6 an den Geber.

Stützblech-Montageset R69 für Drehmomentstütze Grösse M6

제품번호: 11082676

Stützblech-Montageset R69 zum Anbau einer Drehmomentstütze Grösse M6 an den Geber.

Schraubmontageset für Drehmomentstütze Grösse M6

제품번호: 11072076

Schraubmontageset zum direkten Anbau einer Drehmomentstütze Grösse M6 an den Geber (ohne Stützblech).

Drehmomentstütze M6, Länge 67...70 mm

제품번호: 11043628

  • Drehmomentstütze für Hohlwellen-Drehgeber
  • Gelenkköpfe Baugrösse M6 nach DIN ISO 12240-4, Massreihe K
  • Ausgleich von Anbautoleranzen der Antriebswelle in axialer Richtung
  • Standard Version
  • Länge 67...70 mm
Torque arm M6, length 120...130 mm (≥71 mm)

제품번호: 11004078

  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
Torque arm M6, length 425...460 mm (≥131 mm)

제품번호: 11002915

  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
Torque arm M6 insulated, length 67...70 mm

제품번호: 11054917

  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 67...70 mm
Torque arm M6 insulated, length 120...130 mm (≥71 mm)

제품번호: 11072795

  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
Torque arm M6 insulated, length 425...460 mm (≥131 mm)

제품번호: 11082677

  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
Mounting kit for torque arm size M6

제품번호: 11071904

Mounting kit for fixing a torque arm size M6.

Connectors and cables
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.

Mating connector M23, solder version, 12-pin, CCW

제품번호: 11068577

Mating connector M23 in solder version (12-pin, female, CCW) for cable connection to the flange connector M23 (12-pin, male, CW).

Diagnostic accessories
Analyzer for encoders HENQ 1100

제품번호: 11075858

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

제품번호: 11075880

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages

맨 위로