Technical data
General data
Type
  • Through beam sensor
Emitter / receiver
  • Emitter
Light source
  • Pulsed red laser diode
Actual range Sb
  • 55 m
Nominal range Sn
  • 60 m
Power on indication
  • LED green
Emission power adjustment
  • No
Laser class
  • 1
Distance to focus
  • Parallel beam
Wave length
  • 630 nm
Electrical data
Voltage supply range +Vs
  • 10 … 30 VDC
Current consumption max. (no load)
  • 45 mA
Current consumption typ.
  • 35 mA
Reverse polarity protection
  • Yes
Mechanical data
Width / diameter
  • 18 mm
Height / length
  • 67 mm
Type
  • Cylindrical threaded
Housing material
  • Brass nickel plated
Front (optics)
  • PMMA
Connection types
  • Cable 4 pin, 2 m
Ambient conditions
Operating temperature
  • -10 … +55 °C
Protection class
  • IP 67

Downloads
Data sheet
Quickstart
3D CAD / CAE

Drawings
Drawings
Connection diagram
Beam characteristic (typically)
Laser warning

Accessories
Fitting receiver
OR18.EL-NV1P.7BCV
Through beam sensors - standard

Article no.: 11157820

  • receiver
  • through beam sensor
  • 55 m
  • NPN complementary
  • potentiometer, 270°
  • cable 4 pin, 2 m
  • -10 … 55 °C
  • IP 67
OR18.EL-NV1P.7BO
Through beam sensors - standard

Article no.: 11157819

  • receiver
  • through beam sensor
  • 55 m
  • NPN complementary
  • potentiometer, 270°
  • connector M12 4 pin
  • -10 … 55 °C
  • IP 67
OR18.EL-PV1P.7BCV
Through beam sensors - standard

Article no.: 11157818

  • receiver
  • through beam sensor
  • 55 m
  • PNP complementary
  • potentiometer, 270°
  • cable 4 pin, 2 m
  • -10 … 55 °C
  • IP 67
OR18.EL-PV1P.7BO
Through beam sensors - standard

Article no.: 11157817

  • receiver
  • through beam sensor
  • 55 m
  • PNP complementary
  • potentiometer, 270°
  • connector M12 4 pin
  • -10 … 55 °C
  • IP 67
Mounting accessories
10151658
Sensofix series 18

Article no.: 10151658

  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel
ZADAP-M18.STANDARD
Mounting bracket series 18

Article no.: 11172096

  • Material: Steel galvanized
ZADAP-M18.SHORT
Mounting bracket short series 18 (L design)

Article no.: 11171584

  • Material: Steel galvanized
ZADAP-M18.LONG
Mounting bracket long series 18 (L design)

Article no.: 11172095

  • Material: Steel galvanized
ZADAP-M18.SWING
Mounting bracket for adjustment for sensors series 18

Article no.: 11172110

  • Material: Plastic (ABS TERLURAN)
ZADAP-M18.MICRO
Mounting bracket for adjustment for sensors series 18

Article no.: 11172099

  • Material: Steel galvanized

To the top