2. Produktübersicht
  3. Drehgeber / Winkelsensoren
  4. HeavyDuty-Drehgeber inkremental
  5. Komplettes Portfolio mit Hohlwelle
  6. HOG 100
Technische Daten
Technische Daten - elektrisch
Betriebsspannung
  • 9...30 VDC
  • 5 VDC ±5 %
  • 9...26 VDC
Betriebsstrom ohne Last
  • ≤100 mA
Impulse pro Umdrehung
  • 1024 … 10000
Phasenverschiebung
  • 90 ° ±8°
Tastverhältnis
  • 44…56 %
Referenzsignal
  • Nullimpuls, Breite 90°
Abtastprinzip
  • Optisch
Ausgabefrequenz
  • ≤250 kHz
Ausgangssignale
  • K1, K2, K0 + invertierte
Ausgangsstufen
  • HTL
  • TTL/RS422
Störfestigkeit
  • EN 61000-6-2
Störaussendung
  • EN 61000-6-3
Zulassung
  • CE
  • UL-Zulassung / E217823
Technische Daten - mechanisch
Baugrösse (Flansch)
  • ø105 mm
Wellenart
  • ø16 mm (einseitig offene Hohlwelle)
  • ø17 mm (Konuswelle 1:10)
Zulässige Wellenbelastung
  • ≤450 N axial
  • ≤600 N radial
Schutzart EN 60529
  • IP 66
Betriebsdrehzahl
  • ≤10000 U/min (mechanisch)
Betriebsdrehmoment typ.
  • 6 Ncm
Trägheitsmoment Rotor
  • 320 gcm²
Werkstoff
  • Gehäuse: Aluminium-Druckguss
  • Welle: Edelstahl
Betriebstemperatur
  • -30...+85 °C
Widerstandsfähigkeit
  • IEC 60068-2-6
  • Vibration 20 g, 10-2000 Hz
  • IEC 60068-2-27
  • Schock 300 g, 6 ms
Korrosionsschutz
  • IEC 60068-2-52 Salzsprühnebel
  • für Umgebungsbedingungen C4 nach ISO 12944-2
Explosionsschutz
  • II 3 G Ex ec IIC T4 Gc (Gas)
  • II 3 D Ex tc IIIC T135°C Dc (Staub)
  • (nur bei Option ATEX)
Anschluss
  • Klemmenkasten
  • Klemmendeckel
Masse ca.
  • 1,5 kg
Downloads
Datenblatt
Betriebsanleitung
Konformitätserklärungen
3D CAD / CAE

  • HOG 100, Wellendurchmesser 16 mm, Staubschutz, Klemmenkasten radial / STEP

  • HOG 100, Wellendurchmesser 16 mm, Staubschutz, Klemmendeckel axial / STEP

Accessories
Mounting accessories
Torque arm M6, length 67...70 mm

Article no.: 11043628
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 67...70 mm
Torque arm M6, length 120...130 mm (≥71 mm)

Article no.: 11004078
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
Torque arm M6, length 425...460 mm (≥131 mm)

Article no.: 11002915
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
Torque arm M6 insulated, length 67...70 mm

Article no.: 11054917
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 67...70 mm
Torque arm M6 insulated, length 120...130 mm (≥71 mm)

Article no.: 11072795
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
Torque arm M6 insulated, length 425...460 mm (≥131 mm)

Article no.: 11082677
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
Mounting kit for torque arm size M6 and earthing strap

Article no.: 11077197

Mounting kit for fixing a torque arm size M6 and an earthing strap.
Mounting and dismounting set

Article no.: 11077087

Mounting and dismounting set for fixing a blind hollow shaft encoder to the drive shaft and for dismounting the encoder from the drive shaft.
Connectors and cables
Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
Diagnostic accessories
Analyzer for encoders HENQ 1100

Article no.: 11075858
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
Analyzer for encoders HENQ 1100 B
with integrated battery

Article no.: 11075880
  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages
To the top