Caractéristiques techniques
Données générales
Fonction
  • Barrière réflex
Exécution spéciale
  • Design hygiénique
Version
  • Détection d’objet transparent
Source lumineuse
  • LED PinPoint, pulsée
Portée de service Sb
  • 3,5 m
Limite de portée Sn
  • 4 m
Filtre de polarisation
  • Oui
L'atténuation du signal minimum
  • 10 % / 20 % / 30 %
Indication réception
  • LED jaune
Indication de fonctionnement
  • LED verte
Réglage sensibilité
  • Teach-in et IO-Link
Longueur d'ondes
  • 630 nm
Suppression influence réciproque
  • Oui
Axe d'alignement optique
  • < 2°
Autorisations/certificats
  • Ecolab
  • Adapted from EHEDG
Données électriques
Temps d'activation / désactivation
  • < 0,25 ms
Plage de tension +Vs
  • 10 … 30 VDC
Consommation max. (sans charge)
  • 35 mA
Courant absorbé moyen
  • 30 mA
Tension résiduelle Vd
  • < 3 VDC
Fonction de commutation
  • Claire/sombre
Circuit de sortie
  • Push-pull
Courant de sortie
  • < 100 mA
Protégé contre courts-circuits
  • Oui
Protégé contre inversion polarité
  • Oui
Données mécaniques
Largeur / Diamètre
  • 16,5 mm
Hauteur / Longueur
  • 34,6 mm
Profondeur
  • 28,7 mm
Forme du boîtier
  • Parallélépipédique
Matériau du boîtier
  • Acier inoxydable 1.4404 (V4A)
Face avant (optique)
  • PMMA
Version de raccordement
  • Connecteur déporté M8, L=200 mm
Conditions ambiantes
Température de fonctionnement
  • -25 … +60 °C
Classe de protection
  • IP 68/69K & proTect+

Téléchargements
Fiche technique
Guide rapide
Instructions d'utilisation
Logiciel
3D CAD / CAE

Diagrammes
Courbe réserve de fonctionnement

Dessins
Dessins
Schéma de raccordement
Repérage du connecteur
Progression du faisceau (typiquement)

Accessori
Réflecteurs
FTDR 047W047
Réflecteur en inox pour barrière réflex en design hygiénique

Articolo n..: 11149760

  • Réflecteur en inox pour barrière réflex en design hygiénique
  • Certifié EHEDG
Périphérie
IO-Link Master – IO-Link Master EtherNet/IP, 8-Port, IP67 – IO-Link Master PROFINET, 8-Port, IP67 – IO-Link Master PROFINET – IO-Link Master EtherNet/IP IO-Link Master PROFINET, 8-Port, IP67

Articolo n..: 11215447

  • Suitable for field use with IP67
  • 8 flexibly assignable ports enable various control concepts
  • Interface diversity with 2x PROFINET, Modbus TCP and OPC UA
IO-Link Master – IO-Link Master EtherNet/IP, 8-Port, IP67 – IO-Link Master PROFINET, 8-Port, IP67 – IO-Link Master PROFINET – IO-Link Master EtherNet/IP IO-Link Master EtherNet/IP, 8-Port, IP67

Articolo n..: 11215460

  • Field device with IP67
  • 8 ports for integrating the sensors for IO-Link communication or digital I/O
  • 2 EtherNet/IP interfaces
  • Supports Modbus TCP and OPC UA
IO-Link Master – IO-Link Master EtherNet/IP, 8-Port, IP20 – IO-Link Master PROFINET, 8-Port, IP20 – IO-Link Master PROFINET – IO-Link Master EtherNet/IP IO-Link Master PROFINET, 8-Port, IP20

Articolo n..: 11215445

  • Suitable for control cabinet thanks to IP20
  • 8 flexibly assignable ports enable various control concepts
  • Interface diversity with 2x PROFINET, Modbus TCP and OPC UA
IO-Link Master – IO-Link Master EtherNet/IP, 8-Port, IP20 – IO-Link Master PROFINET, 8-Port, IP20 – IO-Link Master PROFINET – IO-Link Master EtherNet/IP IO-Link Master EtherNet/IP, 8-Port, IP20

Articolo n..: 11215448

  • For the control cabinet with IP20
  • 8 ports for integrating the sensors for IO-Link communication or digital I/O
  • 2 EtherNet/IP interfaces
  • Supports Modbus TCP and OPC UA
     
ZTEST-ALL.DIGITAL
Test unit for sensors digital

Articolo n..: 11084377

  • LED (red/green) for digital PNP/NPN signals
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
ZTEST-ALL.ANALOG
Test unit for sensors analog & digital

Articolo n..: 11084376

  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
ZTOOL-ALL.TPEN
Teach Pen for sensors in metal housing

Articolo n..: 11137318

  • Local Teach-in of sensors in metal housing
ZTOOL-ALL.TPENJP
Teach Pen for sensors in metal housing (USA, CAN, JP)

Articolo n..: 11141124

  • Local Teach-in of sensors in metal housing
USB IO-Link Master
USB IO-Link Master

Articolo n..: 11048016

  • Integration of IO-Link sensors via USB
  • Including power supply (EU, KOR, USA, AUS, UK) and USB cable
Peripherals – SensControl  – Wireless IO-Link master and app – Wireless IO-Link master SensControl
Wireless IO-Link Master

Articolo n..: 11214576

  • Integration of IO-Link sensors via USB
  • Including power supply (EU, KOR, USA, AUS, UK) and USB cable
Mounting accessories
HI11-1H
Mounting for sensors in hygienic design Ø 11 mm

Articolo n..: 11039552

  • Material: Stainless steel V4A
  • EHEDG-certified
Connectors and mating connectors
ESG 32AY0200
Connector M8, 4 pin, straight, 2 m, V4A-PP

Articolo n..: 11166415

  • Connecting cable for Connector type M8
  • 2 m
  • Unshielded
  • Food & Beverage

ESG 32AY0500
Connector M8, 4 pin, straight, 5 m, V4A-PP

Articolo n..: 11166419

  • Connecting cable for Connector type M8
  • 5 m
  • Unshielded
  • Food & Beverage

ESG 32AY1000
Connector M8, 4 pin, straight, 10 m, V4A-PP

Articolo n..: 11166440

  • Connecting cable for Connector type M8
  • 10 m
  • Unshielded
  • Food & Beverage

ESW 31AY0200
Connector M8, 4 pin, angular, 2 m, V4A-PP

Articolo n..: 11166441

  • Connecting cable for Connector type M8
  • 2 m
  • Unshielded
  • Food & Beverage

ESW 31AY0500
Connector M8, 4 pin, angular, 5 m, V4A-PP

Articolo n..: 11166442

  • Connecting cable for Connector type M8
  • 5 m
  • Unshielded
  • Food & Beverage

ESW 31AY1000
Connector M8, 4 pin, angular, 10 m, V4A-PP

Articolo n..: 11166443

  • Connecting cable for Connector type M8
  • 10 m
  • Unshielded
  • Food & Beverage


In alto