Technical data
General data
Type
  • Through beam sensor
Emitter / receiver
  • Receiver
Light source
  • Use with pulsed red laser diode
Actual range Sb
  • 5 m
Nominal range Sn
  • 6 m
Smallest object recognizable typ.
  • 3 mm (0,5 mm with aperture)
Alignment / soiled lens indicator
  • Flashing output indicator
Output indicator
  • LED yellow
Power on indication
  • LED green
Sensitivity adjustment
  • qTeach
Suppression of reciprocal influence
  • Yes
Electrical data
Response time / release time
  • < 0.1 ms
  • < 0.12 ms
Jitter
  • < 0.03 ms
  • < 0.05 ms
Voltage supply range +Vs
  • 10 … 30 VDC
Current consumption max. (no load)
  • 20 mA (@ 10 VDC)
Current consumption typ.
  • 10 mA (@ 24 VDC)
Voltage drop Vd
  • < 2 VDC
Output function
  • Light / dark operate
Output circuit
  • PNP complementary
Output current
  • < 50 mA
Short circuit protection
  • Yes
Reverse polarity protection
  • Yes
Mechanical data
Width / diameter
  • 8 mm
Height / length
  • 25.1 mm
Depth
  • 14.1 mm
Type
  • Rectangular
Mechanical mounting
  • Threaded sleeves M3 (stainless steel)
Housing material
  • Plastic (ASA, PMMA)
Front (optics)
  • PMMA
Connection types
  • Cable 4 pin, 2 m
Cable characteristics
  • PVC / PVC 4 x 0,08 mm²
Ambient conditions
Operating temperature
  • -25 … +50 °C
Protection class
  • IP 67

Downloads
Data sheet
Operating Manual
3D CAD / CAE

Diagrams
Excess gain curve

Drawings
Drawings
Connection diagram

Accessori
Fitting emitter
O200.TL-GZZY.72CV/FIN2
Through beam sensors - miniature

Articolo n..: 11228766

  • Most secure object detection due to the barrier principle
  • Parallel laser beam for uniform detection over the measuring range
  • Deactivation of the transmitter diode via test input or IO-Link
  • Robust housing with stainless steel spacer sleeves
O200.TL-GZZY.72NV/FIN2
Through beam sensors - miniature

Articolo n..: 11225048

  • Sicherste Objekterkennung durch Schrankenprinzip
  • Paralleler Laserstrahl für ein gleichmässiges Detektionsverhalten über den Messbereich
  • Deaktivierung der Sendediode per Testeingang oder IO-Link
  • Robustes Gehäuse mit Distanzhülsen aus Edelstahl
O200.TL-GZZY.72CV/FIN2_H006
Through beam sensors - miniature

Articolo n..: 11230776

  • Sicherste Objekterkennung durch Schrankenprinzip
  • Paralleler Laserstrahl für ein gleichmässiges Detektionsverhalten über den Messbereich
  • Deaktivierung der Sendediode per Testeingang oder IO-Link
  • Schnelle Montage mittels M3 Gewindebuchsen aus Edelstahl
O200.TL-GZZY.72NV/FIN2_H006
Through beam sensors - miniature

Articolo n..: 11230777

  • Sicherste Objekterkennung durch Schrankenprinzip
  • Paralleler Laserstrahl für ein gleichmässiges Detektionsverhalten über den Messbereich
  • Deaktivierung der Sendediode per Testeingang oder IO-Link
  • Schnelle Montage mittels M3 Gewindebuchsen aus Edelstahl
Peripherie
ZTEST-ALL.DIGITAL
Sensor-Testgerät digital

Articolo n..: 11084377

  • Anzeige digital PNP/NPN über LED rot/grün
  • Programmierung von Sensoren über integrierte Teach- Taste
  • Anschluss für Stecker-Netzteil (Als Zubehör erhältlich)
ZTEST-ALL.ANALOG
Sensor-Testgerät analog & digital

Articolo n..: 11084376

  • Anzeige über Display (V oder mA), bzw. LED (PNP/NPN)
  • Programmierung von Sensoren über integrierte Teach- Taste
  • Anschluss für Stecker-Netzteil (Als Zubehör erhältlich)
Montagezubehör
10150326
Sensofix Serie 10 / Serie 20

Articolo n..: 10150326

  • Backen aus Edelstahl
  • Kugelzapfen aus Stahl verzinkt
  • Montageblech aus Edelstahl
ZADAP-200.STRAIGHT
Befestigungswinkel O200

Articolo n..: 11206601

  • Material: stainless steel
  • Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
ZADAP-200.ANGLE_L
Mounting bracket O200 (L design)

Articolo n..: 11206602

  • Material: stainless steel
  • Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
ZADAP-200.ANGLE_S
Mounting bracket O200 (S design)

Articolo n..: 11206603

  • Material: stainless steel
  • Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
ZADAP-200.SERIES10
Mounting bracket O200 - Retrofit for sensors series 10

Articolo n..: 11208477

  • Material: plastic
Lenses and components
ZBLEN-200.R_0.5MM
Slot aperture stickers series 200

Articolo n..: 11206587

  • Material: stainless steel
  • Contents: 6 pieces (3 Sets)
  • screw mounting
  • Aperture: Ø 0,5 mm
ZBLEN-200.R_1MM
Slot aperture stickers series 200

Articolo n..: 11206589

  • Material: stainless steel
  • Contents: 6 pieces (3 Sets)
  • screw mounting
  • Aperture: Ø 1 mm
ZBLEN-200.R_1.5MM
Slot aperture stickers series 200

Articolo n..: 11206610

  • Material: stainless steel
  • Contents: 6 pieces (3 Sets)
  • screw mounting
  • Aperture: Ø 1,5 mm
ZBLEN-200.R_2MM
Slot aperture stickers series 200

Articolo n..: 11206611

  • Material: stainless steel
  • Contents: 6 pieces (3 Sets)
  • screw mounting
  • Aperture: Ø 2 mm
ZBLEN-200.MIXED
Slot aperture stickers series 200

Articolo n..: 11206614

  • Material: stainless steel
  • Contents: 1 pieces
  • screw mounting
  • Aperture: Round Ø 0,5 mm, 1 mm, 1,5 mm, 2 mm
  • Aperture: Slit 0,5 x 3 mm vertical, 0,5 x 3 mm horizontal
ZBLEN-200.SLIT_HOR
Slot aperture stickers series 200

Articolo n..: 11206613

  • Material: stainless steel
  • Contents: 6 pieces (3 Sets)
  • screw mounting
  • Aperture: 0,5 mm x 3 mm horizontal
ZBLEN-200.SLIT_VER
Slot aperture stickers series 200

Articolo n..: 11206612

  • Material: stainless steel
  • Contents: 6 pieces (3 Sets)
  • screw mounting
  • Aperture: 0,5 mm x 3 mm vertical

In alto