Solid shaft ø11 mm with EURO flange |
Solid shaft with EURO flange B10 |
|
|
|
|
Dados técnicos - Classificações eléctricas | ||
Approval | UL 508 / CSA 22.2 | |
Consumption w/o load | ≤100 mA | ≤70 mA |
Duty cycle | 45…55 % typical at 1024, 2048 ppr (further see table Duty cycle) | |
Emitted interference | EN 61000-6-3 | EN 61000-6-3 |
Initializing time | ≤ 30 ms after power on | |
Interference immunity | EN 61000-6-2 | EN 61000-6-2 |
Output frequency | ≤300 kHz (TTL) ≤160 kHz (HTL) |
≤300 kHz (TTL) ≤160 kHz (HTL) |
Output signals | A, B, N + inverted | A+, B+, R+, A-, B-, R- |
Output stages | TTL linedriver (short-circuit proof) HTL push-pull (short-circuit proof) |
TTL/RS422 HTL/push-pull |
Programmable parameters | Output level TTL/HTL Pulse number 1...65536 Zero pulse width 90°/180° Zero pulse position Signal sequence |
|
Pulses per revolution | 1000 … 6000 | 1 … 65536 |
Reference signal | Zero pulse, width 90° | Zero pulse 90° or 180° |
Reverse polarity protection | Yes | Yes |
Sensing method | Optical | Optical |
Short-circuit proof | Yes | |
Voltage supply | 5 VDC ±5 % 8...30 VDC |
4.75...30 VDC |
Dados técnicos - projeto mecânico | ||
Admitted shaft load | ≤40 N axial ≤60 N radial |
≤40 N axial ≤80 N radial |
Connection | Connector M23 type 2, 12-pin | Flange connector M12, 8-pin Flange connector M23, 12-pin Cable |
Flange | EURO flange B10 | |
Material | Housing: aluminium Shaft: stainless steel |
Housing: aluminium die-cast Flange: aluminium Solid shaft: stainless steel |
Operating speed | ≤12000 rpm | ≤6000 rpm (+20 °C, IP 67) ≤12000 rpm (+20 °C, IP 65) |
Operating temperature | -20...+70 °C -20...+100 °C |
-40...+100 °C |
Protection EN 60529 | IP 65 | IP 65 (without shaft seal) IP 67 (with shaft seal) |
Relative humidity | 90 % non-condensing | 90 % non-condensing |
Resistance | EN 60068-2-6 Vibration 10 g, 55-2000 Hz EN 60068-2-27 Shock 30 g, 11 ms |
EN 60068-2-6 Vibration 30 g, 10-2000 Hz EN 60068-2-27 Shock 300 g, 6 ms |
Shaft type | ø11 mm solid shaft | ø11 x 30 mm solid shaft with woodruff key |
Size (flange) | ø115 mm | ø115 mm |
Starting torque | ≤0,012 Nm (+20 °C) | ≤0,015 Nm (+20 °C, IP 65) ≤0,02 Nm (+20 °C, IP 67) |
Weight approx. | 850 g | 485 g |