HOG 11 + ESL 93

Mounting kit for fixing a torque arm size M6 and an earthing strap.

Mounting and dismounting set for fixing a blind hollow shaft encoder to the drive shaft and for dismounting the encoder from the drive shaft.

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Standard version
• Length 67...70 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Standard version
• Length 120...130 mm
• Can be shortened to ≥71 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Standard version
• Length 425...460 mm
• Can be shortened to ≥131 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Insulated version
• Length 67...70 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Insulated version
• Length 120...130 mm
• Can be shortened to ≥71 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Insulated version
• Length 425...460 mm
• Can be shortened to ≥131 mm

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.

• Switch relay box for switching high voltages and currents for the electrical speed switch ES(L) 93
• Triggering is carried out by the transistor outputs of the ES(L) 93
• The ES 93 R also conditions an externally supplied AC or DC low voltage

• Analyzer for encoders
• Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
• Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
• Individual error messages
• Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
• Recording of measurements and error messages

• Analyzer for encoders
• Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
• Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
• Individual error messages
• Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
• Recording of measurements and error messages