HMG10-B - Incremental

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Standard version
• Length 67...70 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Standard version
• Length 120...130 mm
• Can be shortened to ≥71 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Standard version
• Length 425...460 mm
• Can be shortened to ≥131 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Insulated version
• Length 67...70 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Insulated version
• Length 120...130 mm
• Can be shortened to ≥71 mm

• Torque arm for hollow shaft encoder
• Swivel joints size M6 according to DIN ISO 12240-4, size series K
• Compensate for mounting tolerances of the drive shaft in an axial direction
• Insulated version
• Length 425...460 mm
• Can be shortened to ≥131 mm

Mounting kit for fixing a torque arm size M6 and an earthing strap.

Mounting and dismounting set for fixing a blind hollow shaft encoder to the drive shaft and for dismounting the encoder from the drive shaft.

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.

The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634. The cable can be supplied in any length and pre-fitted with various connectors.

• Adapter cable for programming the HMG10P/PMG10P SSI series with terminal box
• With D-SUB connector (male) for connection of encoders of HMG10/PMG10 SSI series with terminal box to the WLAN adapter Z-PA.SDL.1
• The encoder can be conntected to the WLAN adapter in ONLINE or OFFLINE mode

• Programming unit for HMG10P/PMG10P series
• Parametrization of SSI absolute signal, incremental output and speed switch (depending on encoder version)
• Monitoring of current position, speed und temperature
• Connection over Ethernet or wireless over WLAN
• Simple and intuitive use via webbrowser on pc, tablet or smartphone
• Fast parameter download